Hi Pedro,
tor 2006-11-02 klockan 12:48 + skrev Pedro Côrte-Real:
I have an MGE Ellipse Premium 1200 that I connected to my server using
its USB cable. Nut seems to be working fine. I've done a power down
test and it worked and came back up when the UPS had power again. I'm
using the
Ok
tor 2006-11-02 klockan 14:59 + skrev Pedro Côrte-Real:
On 11/2/06, Kjell Claesson [EMAIL PROTECTED] wrote:
Hi Pedro,
Hi
It depends on what dist of Linux you are running. The new type
use udev and hal and the old use coldplug.
So little more info about your system please
Hi Rohan,
mån 2006-10-16 klockan 09:52 +0930 skrev Rohan M.:
Hi everyone,
First of all a big thank you for the NUT package, I've been using it for
years and couldn't get by without it!
Thanks.
I have two Powerware UPS's here, a 9120/1500va and a 5110/700va. The 9120
has used a hacked
OK Kipp,
ons 2006-09-20 klockan 21:50 -0500 skrev Kipp Cannon:
On Wed, 20 Sep 2006, Kipp Cannon wrote:
8--snip
Hi,
Thanks for this suggestion. Unfortunately, I followed the instructions in
the manual to put the UPS into Printer Mode, 2400 Baud, and nothing
Ok Martin,
tor 2006-08-17 klockan 22:03 +0300 skrev Martin Ivanov:
Mr Claesson,
with my current configuration, the ups.status when the UPS is disconnected
from the mains is OB. There is no more OB BOOST. Now my upsd.users is:
That's good.
8--snip-
battery.charge: 97.7
Yep
tor 2006-08-17 klockan 22:49 +0300 skrev Martin Ivanov:
And something else, that previously eluded from my thoughts:my notifyme
script,i.e the script that is executed at an ups.status=OB event, is:
echo `date` /root/upsLog
echo No power, shutting down the system! /root/upsLog
tis 2006-08-15 klockan 15:32 -0500 skrev Matt Brei:
Updated to 2.1.0 and I get the same thing.
Network UPS Tools - UPS driver controller 2.1.0
Network UPS Tools: 0.28 USB communication driver 0.28 - core 0.30
(2.1.0)
No matching HID UPS found
Driver failed to start (exit status=1)
Hi Rich,
sön 2006-08-13 klockan 19:16 -0500 skrev Rich Osman:
I'll read TFM, but I can't find it.
My nut install is working fine now that Kjell pointed out my case error
and I finished configging it. The only problem that remains is that the
serial port mode and ownership gets reset on
Hi Alexander,
sön 2006-08-06 klockan 14:36 +0400 skrev Alexander Zubkov:
I've updated to 2.0.4 and changed driver to megatec. It is working too.
Old info, showed by fentonups:
battery.charge: 100.0
battery.voltage: 28.0
driver.name: fentonups
driver.parameter.port: /dev/ttyS0
mån 2006-08-07 klockan 00:22 +0400 skrev Alexander Zubkov:
Kjell Claesson wrote:
Thanks for the info. I change the driver to megatec for the RealSmart
1000 and 800 in the driver.list.
Hi.
I've checked PowerMan BackPro Plus 1000 with genericups type=4.
OL, OB and LB are showed
Ok
tor 2006-08-03 klockan 11:29 +0200 skrev Daniel Haas:
8--snip-
Looks like you have to check your upsmon.conf. You should be
monitoring [EMAIL PROTECTED] not smnp. Also check the ACl in
upsd.conf if you run the monitor on another computer then the
upsd.
Sorry. I sent you
tor 2006-08-03 klockan 09:51 +0200 skrev Daniel Haas:
Hi NUT-Users,
Hi Daniel,
we work with a GE LP 33 UPS and an Advanced SNMP WEB Interface Card. This
card supports the RFC1628 Definition.
So I think this combination work together with NUT and the snmp-driver,
correct?
I installed
tis 2006-08-01 klockan 09:11 -0400 skrev Barry Fawthrop:
/lib/nut/newhidups -DD -u root -x vendorid=09df auto
Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.3)
Here you state 09df as vendorID.
debug level is '2'
Checking device (0D9F/0001) (001/003)
- VendorID: 0d9f
- ProductID:
Hi John,
tis 2006-08-01 klockan 00:22 +1000 skrev John Murphy:
Help please on Powerware 3105 serial (aka SOLA 305 here in Australia).
Is it best configured as a contact-closure device or do I try and
persist to get bcmxcp to work - which it won't so far?
Running on SUSE 10.1
Thanks,
This is
Hi Tom,
tor 2006-07-27 klockan 21:49 -0400 skrev Tom Diehl:
Outstanding!! Your instructions got it working for me.
Thank You.
Nice that it get you going.
One more question, I have the card in the ups for monitoring the ambient
temperature and humidity. Should upsc be able to display
Follow up
ons 2006-07-26 klockan 01:07 -0500 skrev John H.:
is generic driver only for serial?
BTW it may be run on a usb to serial dongle. But I'm not
sure about that. Maybe we have someone on the list that have
tested the generic driver on this gadgets.
Regards
Kjell
Hi
tis 2006-07-25 klockan 13:49 -0500 skrev John H.:
is there 3110us support yet?
No, not for the usb. But it does not do any more on usb then on
the generic contact driver. There is no voltage or current or
battery data, just indication that it is OL or OB.
To support 3110 and the 5115 on
mån 2006-07-24 klockan 15:06 +0300 skrev Omry Yadan:
Hi List,
Hi Omry,
I just got myself a new everpower-1000va.
according to the compatibility list, the 'safenet' driver supposed to
support it,
however, when I try, I get this in syslog:
Jul 24 15:05:22 tv upsd[26458]: Can't
Hi Gary,
tor 2006-06-08 klockan 13:54 +1000 skrev Gary and Jane Pearce:
Thank you Kjell,
The permissions scripts (hotplug-ng) are missing from the SuSE 10.1
distribution. In the end I downloaded the sources to get the script I needed
then discovered your solution of adding the following
Hello Michelle.
ons 2006-06-07 klockan 13:57 -0700 skrev Michelle Franz:
Hello all,
I'm using Nut quite happily with my Powerware 9125 and 9115 UPSs. I'd
like to delay restoring power to the computers after a loss of power
shutdown until a reasonable battery charge has been restored, to
Hi John.
Yes this is a small glitch in the code.
The iproduct an imanufacturer code i different on all
powerware usb ups. So you have to remove this test.
Open the file 'nut_usb.c' in the drivers directory.
Go down to around line 63 it looks like this.
Hi Ken,
Can you remove the lines and do a test?
I'm about to remove this, but would like to know
if the driver works with your ups.
Kjell
sön 2006-04-16 klockan 06:24 -0700 skrev Ken Yee:
--- Kjell Claesson [EMAIL PROTECTED] wrote:
It check the iManufacturer and iProduct code
Hi all,
To Arnaud. Yes the 5115 is talking bcmxcp but it is not working with the
bcmxcp_usb driver. I got some help from a Australian guy to test this.
But it look's like the first try of usb from powerware was flaky.
Even the windows driver loses contact to the ups.
It is usb ver1.1 so i made a
Hi,
There is a slight difference between the bcmxcp_usb driver and this
ups.
If you look at the descriptor it tell you that the protocol is reported on
the interface level. The interface level say HID device.
If you look at the bcmxcp_usb driver it say vendor protocol on
the interface level.
So
Hi Ken.
The 9120 is talking bcmxcp. So you should run the bcmxcp driver.
If you have a usb connector on the ups, try the bcmxcp_usb driver.
One problem with the bcmxcp_usb driver is that in the current state it
does not set the ups to 'request only mode', but the serial bcmxcp driver does
it.
[EMAIL PROTECTED]
To: nut-upsuser@lists.alioth.debian.org
Sent: Monday, April 10, 2006 4:18 PM
Subject: Re: [Nut-upsuser] Powerware 9120 serial connection via USB/serialdongle
--- Kjell Claesson [EMAIL PROTECTED] wrote:
The 9120 is talking bcmxcp. So you should run the
bcmxcp driver.
Forgot
, if there was any problems
starting it up on the usb driver.
Regards
Kjell
- Original Message -
From: Ken Yee [EMAIL PROTECTED]
To: nut-upsuser@lists.alioth.debian.org
Sent: Monday, April 10, 2006 7:28 PM
Subject: Re: [Nut-upsuser] Powerware 9120 serial connection viaUSB/serialdongle
--- Kjell
Hi,
tor 2006-02-23 klockan 07:09 -0600 skrev Gregory Gulik:
That's exactly what I'm doing.
Upsd still can't seem to communicate with the tripplite_usb driver.
It's saying the file is not found.
Here's what strace is showing:
socket(PF_FILE, SOCK_STREAM, 0) = 5
connect(5,
ons 2006-02-08 klockan 11:41 +1100 skrev Alistair Popple:
Hi,
I have got a Powerware 5110 UPS which has a usb interface on it. I
have downloaded and compiled nut-2.0.3-pre2 with the usb drivers
enabled on RedHat Enterprise V3 however I have been unable to get nut
to connect to the UPS. I
101 - 129 of 129 matches
Mail list logo
