[Nut-upsuser] nut snmp

Hi. i see that in user-manuel.pdf Similarly, if your UPS connects to your computer via an SNMP network card, you can probably add support for your device bywriting a new subdriver to the existing snmp-ups driver. in this page, http://packages.debian.org/squeeze/nut-snmp This package provides

[Nut-upsuser] configure with error

Hi, i am new on Linux so have some problems about installing package. because of installing package is simple,i install debian ,and install nut by apt-get install nut command. it works fine. i need nut-scanner. i cant find any way to install it witt apt-get.i downloaded nut-2.6.3.tar.gz

Re: [Nut-upsuser] configure with error

: [Nut-upsuser] configure with error From: fredericb...@eaton.com To: ramazan_fi...@hotmail.com CC: nut-upsuser@lists.alioth.debian.org Date: Wed, 25 Apr 2012 09:52:04 +0200 Hello Ramazan, On Wed, 2012-04-25 at 09:41 +0300, ramazan firin wrote: Hi, i am new on Linux so have some

Re: [Nut-upsuser] configure with error

, ramazan firin wrote: enable libltdl (Libtool dlopen abstraction) support: no [...] root@debian:/home/ramazan/Desktop/nut-2.6.3/tools/nut-scanner# make nut-scanner /bin/bash ../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../../include-I../../clients -I../../include

[Nut-upsuser] nut-scanner support dummy-ups

Hi, i want to see output of nut-scanner. can nut-scanner find dummy ups? cheersRamazan.___ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org

[Nut-upsuser] hardware compatibility list

Hi, i dont have technical information about ups so much. so i send hardware compatibility list to my friend who worked at ups manufacturer factory. his commet : ups at the list are, one phase support,not 3 phase. there are 3 phase support ups at market and ups in the list are not very big,

[Nut-upsuser] nut-scanner serial port

Hi, i have a ups which is tescom xt10 and i want nut with it.it has rs 232 port, and bundle softwar T-mon works with serial port. in ups.conf, i add following lines, [serial-ups]driver = genericupsport = /dev/ttyS0upstype = 1 when i start driver, it says input/output error..i try for all

[Nut-upsuser] snmp-ups connection problem

Hi, if i add ups definition ups.conf like that, nut connects to ups.but when i run nut-scanner, it can find ups. [test-ups] driver = snmp-ups port = 1.18.37.238community = passmibs = ietf desc = test ups my notebook and ups not in same sub-network. i donr know it is

[Nut-upsuser] nut-scanner cant find ups

Hi, if i add ups definition ups.conf like that, nut connects to ups.but when i run nut-scanner, it can find ups. [test-ups] driver = snmp-ups port = 1.18.37.238community = passmibs = ietf desc = test ups my notebook and ups not in same sub-network. i donr know it is

[Nut-upsuser] SNMP connection problem

Hi, İ have a necron snmp ups. nut-scanner cant find it. i tried to add with these definition but it fails.. [test5-ups] driver = snmp-ups port = 10.9.40.19 community = asdf12 desc =test i run driver with debugging , result is , root@upsviewer-debian:/usr/local/ups/bin#