> -Original Message-
> From: Fred Liu
> Sent: 星期二, 五月 06, 2014 12:22
> To: Zhiwen Zheng; Keith Wesolowski
> Cc: omnios-disc...@lists.omniti.com; Discussion list for OpenIndiana; Fred
> Liu;
> develo...@lists.illumos.org; smartos-disc...@lists.smartos.org
> Subject: RE: [developer] HBA
On Sun, May 04, 2014 at 02:42:54AM -0700, Fred Liu wrote:
I haven’t got a sas drive to test. But the price delta between
sas and sata drive under the same capacity is not small like USD30 at all. ☹.
I'll counter nebulous griping with hard data:
On Wed, Apr 30, 2014 at 10:13:49AM -0700, Fred Liu wrote:
Is 6805H/6405H(http://www.adaptec.com//en-us/products/series/6h/) worthy of
recommendation too?
That uses the PM8001, which I believe is the same ASIC I have direct
experience with. So it would be good to look at too, yes.
On Tue, May 06, 2014 at 12:10:24AM +0800, Fred Liu wrote:
I have a 6805H in hand and illumos can not detect it. But I don't have
experience
porting driver in FreeBSD it has to illumos. And I do NOT want to waste my
money.:-)
Therefore I would like to do anything to pursue this as long as I
On Mon, May 05, 2014 at 02:49:15AM -0700, Fred Liu wrote:
Just like what Bob mentioned, the current pmcs(7D) in illumos cannot work
with 6H/7H
series of HBAs. Even replaced with SAS drives, the effort is still in vain.
Are you sure the 6-series needs more than just PCI IDs? It's the same
-Original Message-
From: Keith Wesolowski [mailto:keith.wesolow...@joyent.com]
Sent: 星期一, 五月 05, 2014 10:19
To: Fred Liu
Cc: Fred Liu; smartos-disc...@lists.smartos.org;
develo...@lists.illumos.org; Discussion list for OpenIndiana; OmniOS-
disc...@lists.omniti.com
Subject: Re:
Le 2014/05/05 11:54 +0200, Fred Liu a écrit:
Just like what Bob mentioned, the current pmcs(7D) in illumos cannot work with
6H/7H
series of HBAs. Even replaced with SAS drives, the effort is still in vain.
Anyway, it looks like there is a very clear gap between commodity and
enterprise
Laurent Blume laurent...@elanor.org于2014年5月5日星期一写道：
Le 2014/05/05 11:54 +0200, Fred Liu a écrit:
Just like what Bob mentioned, the current pmcs(7D) in illumos cannot work
with 6H/7H
series of HBAs. Even replaced with SAS drives, the effort is still in
vain.
Anyway, it looks like there is
Le 2014/05/05 17:22 +0200, Fred Liu a écrit:
[Fred]: I also heard of this HBA. It has 4 ports as max and very limited
bus bandwidth
Well, hey, consumer! :-)
[Fred]: you have good luck! :-)
哈哈，真的很好运阿!
I did have issues, the usual failing disks and stuff, but there's been
no datalose, and
Laurent Blume laurent...@elanor.org于2014年5月5日星期一写道：
Le 2014/05/05 17:22 +0200, Fred Liu a écrit:
[Fred]: I also heard of this HBA. It has 4 ports as max and very limited
bus bandwidth
Well, hey, consumer! :-)
[Fred]: hr, I agree! :-)
[Fred]: you have good luck! :-)
哈哈，真的很好运阿!
Keith Wesolowski keith.wesolow...@joyent.com于2014年5月5日星期一写道：
On Mon, May 05, 2014 at 02:49:15AM -0700, Fred Liu wrote:
Just like what Bob mentioned, the current pmcs(7D) in illumos cannot
work with 6H/7H
series of HBAs. Even replaced with SAS drives, the effort is still in
vain.
Are you
From: Zhiwen Zheng [mailto:zhiwen...@gmail.com]
Sent: 星期二, 五月 06, 2014 10:09
To: Keith Wesolowski
Cc: omnios-disc...@lists.omniti.com; Fred Liu; Discussion list for
OpenIndiana; Fred Liu; develo...@lists.illumos.org;
smartos-disc...@lists.smartos.org
Subject: Re: [developer] HBA recommended
[fred]：ok. Let's see how it goes after I get the hba.
[fred]: I have got 6805H HBA. It can recognize the sata drives in bios but
these drives cannot be detected in the latest illumos(smartos,oi) release.
I haven’t got a sas drive to test. But the price delta between
sas and sata
Is 6805H/6405H(http://www.adaptec.com//en-us/products/series/6h/) worthy of
recommendation too?
Thanks.
Fred
-Original Message-
From: Keith Wesolowski [mailto:keith.wesolow...@joyent.com]
Sent: 星期四, 五月 01, 2014 0:29
To: Fred Liu
Cc: develo...@lists.illumos.org
Subject: Re:
Keith Wesolowski via smartos-discuss smartos-disc...@lists.smartos.org
于2014年5月1日星期四写道：
On Wed, Apr 30, 2014 at 10:13:49AM -0700, Fred Liu wrote:
Is 6805H/6405H(http://www.adaptec.com//en-us/products/series/6h/)
worthy of recommendation too?
That uses the PM8001, which I believe is the
Keith Wesolowski keith.wesolow...@joyent.com于2014年5月1日星期四写道：
On Thu, May 01, 2014 at 02:13:38AM +0800, Fred Liu wrote:
That uses the PM8001, which I believe is the same ASIC I have direct
experience with. So it would be good to look at too, yes.
[fred]: gotcha! I will give it a
16 matches
Mail list logo
