Re: [RBW] Re: Question about rear brake cable housing routing with low friction on a Clem

Allan, Excellent use of that 135 degree noodle. I have used a couple of these to route derailleur cable from the SunTour Command shifters in place of more cumbersome full cable run on my Wilderness Trail Bike Dirt Drop bar OX Brand Ti 29er cruiser. Also used a 90 degree one on the front cable

[RBW] Re: Also ISO/WTT/WTB Shimano type 10 sp cassette with 14 small cog and 25, 26, 27, 28 big cog

PM sent. I have two SRAM PG 1070 10 speed cassettes. One 12-25 and one 12-27. 12, 13, 14, 15, 16, 17, 19, 21, 24, 27 12, 13, 14, 15, 15, 17, 19, 21, 23, 25 Last 3 cogs on each are attached to a spider. Let me know if you are interested. I may have some individual cogs I can dig through.

Re: [RBW] Re: Gus /Susie bottom bracket -which one?

Looking at IRD website the IRD Quad has a 73mm conversion cups and a conversion washer to change the 68 to a 73. Bottom brackets without a shoulder can be mounted to work with both 68 and 73mm bottom brackets. The bottom bracket would fit further in the shell. I did this with a TruVativ

[RBW] Re: WTB: Drop Bar/Stem/brake/shifter set up

I have something kicking around, but I don't know that you want it. Came off a GMC Denali bike that I converted to flat bar set up. Shifters are SRAM MRX something or another 7 speed. Otherwise, I have a Profile bar with Shimano brake levers mounted. Let me know if interested. Thanks,

[RBW] Re: The Official Introduction of RoadeoRosa

Bill, That bikes looks nice!! I personally prefer canits over calipers for brakes. My "Road Bike" is my 1987 Schwinn Voyageur touring bike. I do have some actual road bikes with caliper brakes, but prefer cantis. The pink color really looks good. Didn't realize the Rene Herse brakes were

[RBW] Re: [BOB] 1) Best source for SP PD 8 hubs. (2) WTB/WTT/WTG Fleecer Ridge tires

Could get a Centerlock to 6 bolt adapter. Thanks, Reginald Alexis On Monday, January 29, 2024 at 8:20:41 AM UTC-6 Patrick Moore wrote: > Many thanks, Chris but I'm looking for a 6-bolt model. > > On Sun, Jan 28, 2024 at 10:13 PM Chris Cullum wrote: > >> I have a black QR 32h SP 8 dynohub.

[RBW] Re: Best practice with Sunrace Thumbshifters

Hello Andrew, What shifters did she have on the bike before? When you said the shifters died, what happened? Lever actually break? Was wondering if there was a way to make the old shifters still work. Shop I frequent replaced some old Shimano brifters that had thumb shifters. The 4 anchors

[RBW] FS or Trade: Clipless Pedals

Hi folks. I am clearing out some stuff and ran across a set of "Panda" Shimano PD-M515 pedals I have no use for. Left pedal is black and right one is silver. Both used, but in good condition, no clips, unless I can find some laying round. Looking at $25 shipped. Would be interested in trade.

[RBW] Re: Any Alternatives to Silver Deore Brake Levers?

Which ones are you referring to? The short pull standard canti/side pull/U-Brake/Rollercam brake lever or the long pull, linear/V-Brake lever? Thanks, Reginald Alexis On Thursday, January 18, 2024 at 9:46:41 AM UTC-6 Batwing wrote: > Hey All, > > Silver Shimano Deore Brake Levers are all

Re: [RBW] Re: RAGBRAI?

BRAN(Bike Ride Across Nebraska) is still going as far as I know. As apposed to RAGBRAI, it is a lot smaller. I think registration is limited to 500 or so. Might be even smaller. Someone described RAGBRAI as a party atmosphere that happens to have bikes involved. BRAN, from what I understand is

Re: [RBW] Re: RAGBRAI?

-line Manitou Mach 5 with little rubber >> bumpers. >> >> On Mon, Jan 15, 2024 at 5:47 PM R. Alexis wrote: >> >>> ... I rode my Rivendell Mountain because I felt it would be the most >>> comfortable with it's Softride suspension stem and Thudbuster Un

Re: [RBW] Re: RAGBRAI?

ll how well they >> insulated one from washboard-type bumps. I found the Softride more >> effective than my then top-o'-line Manitou Mach 5 with little rubber >> bumpers. >> >> On Mon, Jan 15, 2024 at 5:47 PM R. Alexis wrote: >> >>> ... I rode

[RBW] Re: RAGBRAI?

Leah, I took the opportunity to ride the first day of RAGBRAI last summer. I live in eastern Nebraska. I happened to be off that weekend, heard it was starting that weekend and that it was the 50th anniversary of the ride. Had always thought of doing at least the first day, but never took the

[RBW] Re: Let's see your Rivendell headbadges

Nice collection. Makes me regret not getting one of those Rivendell Sheriff badges/pins. Thanks, Reginald Alexis On Monday, December 18, 2023 at 2:02:58 PM UTC-6 Eric Marth wrote: > My smattering of Rivendell badges has recently turned into a collection. > Do you have badges? I'd love to

[RBW] Re: 135mm hub rear wheel in a roadini?

Check with Rivendell to see if this a safe option. I would think it is. I have a mix of both 130 and 135 OLD bikes in the mix with a few 140mm. My 1987 Schwinn Voyageur is 130mm that I have a 132.5 wheelset mounted on. Pretty sure the frame was 126mm OLD prior to me getting it. Settled on that

[RBW] Re: Silver2 cranks!

Was walking past one of my bikes the other day and thought the Sugino AT cranks and the Specialized Flag cranks bare some resemblance to the upcoming Silver 2 cranks. On another note, I was surprised that Rivendell didn't go with a hidden arm crank ala Ritchey. Probably too much of a pain to

[RBW] Re: My Legolas is now a 2x10

Nice! How does that SRAM Force 1x rear der work on that set up? Wondered why one couldn't use it on a double or triple. Nice to know that it still works on 10 speed. Thanks, Reginald Alexis On Thursday, November 23, 2023 at 4:08:37 PM UTC-6 Bill Lindsay wrote: > When I initially built up my

[RBW] Re: Grips appreciation post

I have some Bontrager XXX foam grips on my 1994 Bridgestone MB-1 retro ride. I like them. Also using a combination of small trimmed remain sections of Bontrager XR Silicone and Race Lite X/RXL foam grips on my Gary Fisher Tandem on the front with Surly Bikes Open Bar using SRAM Grip Shift.

[RBW] Re: Atlantis date indicators

A Waterford built Rivendell Atlantis will have a distinctive rear frame drop out. I think Henry James rear drop outs. The first Rivendell built there didn't. Grant has drop outs made specifically for the bikes. Looks like they went with the Waterford standard ones on the Atlantis. This is at

[RBW] Re: WTB - 135 hub

I know I have some mid level Shimano ones and a few no name ones. Will have to look in stash. Seems like you would want something nicer. Thanks, Reginald Alexis On Tuesday, October 31, 2023 at 12:50:14 AM UTC-5 adam.som...@gmail.com wrote: > Hi All, > > Looking for the last piece of my Appo

[RBW] Re: Best mitten design for very cold weather

I saw these on Ponderosa Cycles site a few weeks ago while browsing. I have dealt with the owner in the past. Worked and partially owned a couple different shops in the past. I will have to check them out next time I am hanging in the area. Missed them several weeks ago while out riding.

[RBW] Re: Source for headset locking/key'd spacer

I am sure someone on the list has one they can spare in their parts drawer. I can look in my stuff later for one. Will let you know. Thanks, Reginald Alexis On Thursday, August 31, 2023 at 5:11:28 PM UTC-5 Johnny Alien wrote: > Your google skills are much better than mine. Sadly that item is

[RBW] RAGBRAI 2023 50th Anniversary Ride

RBW List Members, I had a chance to ride the first day of RAGBRAI late last month. Things aligned that I had that weekend off and then discovered the first day of RAGBRAI was that Sunday and that it was the 50th anniversary of the ride. Found out that late Friday and thought about it. After

Re: [RBW] Upcoming Riv Ride: Chicago

Wish it was a different weekend. Would give me an excuse to get back to the Chi and bring the Rivendell Mountain with. Look forward to seeing pics and posts. Thanks, Reginald Alexis On Thursday, August 17, 2023 at 1:49:36 PM UTC-5 Bicycle Belle Ding Ding! wrote: > Just a reminder to mark

[RBW] Re: Tried and liked: Suntour Cyclone pretzel

That does not look good. Maybe once you get it into a stand and carefully remove the derailleur and gently realign the hanger you will be fine. The rear der pully cage can probably be bent back into shape. Issue is probably trusting it. Hope things work out. Glad you were not hurt. Thanks,

[RBW] Re: Seat angle

I would be game for a trip to DMOIA. I am not that far here in Fremont, Nebraska (just outside Omaha) and have done the trip through many times to Chicago. Would be nice to meet or see some list members again. I thing there was some mention a while ago either on this list or iBOB about a

[RBW] Re: Nice brake bits: Shovel Research

Thank you for the info. This brake cable hanger looks nice! I have a Kona one on my Rivendell Mountain from when I initially built it. Bought several. This set up worked better than the Syncros Hang Doggie that I initially planned to use on that build. The Softride suspension stem set up would

[RBW] Re: Mid-build Frustrations—Trek Elance 400

I am probably not one to offer out how to get this going. I have a couple projects myself that need pushed along. You may have to force yourself to schedule the time for some of the things to get and finish the build. I have a Gary Fisher Gemini tandem that sat for several years before I

[RBW] Re: SunTour Shifter, plastic washer falling apart.

I noticed in a few Rivendell employee and Grant's bikes the brass washer. I know in the past Grant has mentioned replacing that plastic washer with a solid brass one, but that the cost was prohibitive. I figured the ones showing on their bikes were prototypes or fabricated solid ones. I have

[RBW] Re: ISO gumwall 26" 2.1+ tires

I have some NOS, in box Tioga Psycho kevlar bead tires, but they are listed at 26x1.95. Don't know what they actually measure out at. How does $25 per sound? Thanks, Reginald Alexis On Friday, June 9, 2023 at 8:13:56 AM UTC-5 Michael Baquerizo wrote: > maybe something hanging in the

Re: [RBW] Re: When the Rivs are sold out and you need a bike for daily commuting...

>>>>>> Both >>>>>> me--except for my shoes--and my stuff (including pointe shoes, which are >>>>>> extremely sensitive to moisture) arrived home bone dry. Most >>>>>> importantly, I >>>>>> felt comfortab

[RBW] Re: Underbiking

The remake of the Wilderness Trail Bikes (WTB) Dirt Drop bar is the Nitto RM3 Dirt Drop. Wonder if some patent kept them from reintroducing them sooner that they did. Thanks, Reginald Alexis On Wednesday, May 24, 2023 at 4:01:42 AM UTC-5 R. Alexis wrote: > Dirt Drop mountain bi

[RBW] Re: WTB: Suntour Cyclone GT long cage

Wonder if you can bend a new tab on the end of that spring to make it work? Thanks, Reginald Alexis On Monday, May 22, 2023 at 4:39:54 PM UTC-5 eric...@gmail.com wrote: > Hello friends — On yesterday's ride I broke one of the tabs on the chain > tension spring of my Cyclone rear mech. > >

[RBW] Re: Underbiking

Dirt Drop mountain bikes are currently at a resurgence. The number of flared drop bars is at an all time high. The fact that Nitto finally started making the the dirt drop probably cemented its return. I have several bikes with Wilderness Trail Bikes Dirt Drop bars and one with a flared Nitto

[RBW] Re: Brought Home A New Puppy!

: image00 (23).jpg] On Monday, February 27, 2023 at 12:51:42 AM UTC-6 R. Alexis wrote: > Got back from a very eventful trip to Chicago. While there was at the REI > in Lincoln Park browsing around. Was at the service area and chatting with > the guy behind the counter inquiring about cab

Re: [RBW] Riv Garage Sale hauls

Looking at your picks looks like you forgot to mention the coin keeper/purse. I have one, not Riv branded that I just dug out of my bag for parking meter change a few days ago. Wish I could have attended. Had it been a few more weeks out I may have tried. Thanks, Reginald Alexis On

[RBW] Re: Catch and (very slow) release of 1997 Waterford-built Rivendell Mountain Bike.

Nice bike!. I have my rear brake cable housing routed the same way. thought of changing it, but don't feel the need. Thanks, Reginald Alexis On Wednesday, March 22, 2023 at 6:04:10 PM UTC-5 Scott Marriott wrote: > I was the lucky duck who grabbed the following from Ted Grant a few years >

[RBW] Re: Let's talk about the All Rounder

Hello all. I don't have an All Rounder, but I do have the first generation Waterford built Rivendell Mountain. Those first generation Rivendell Road, Allrounder and Mountain offered several options when ordering. Rack mount placement, Headtube extention, cream painted accent headtube, etc. I

[RBW] Re: The Great Parts Purge of 2023 - part 1

PM sent on SRAM mini group and SRAM 10 speed rear der pictured. Thanks, Reginald Alexis On Saturday, March 4, 2023 at 11:22:32 PM UTC-6 saintruggler wrote: > Doing a little spring cleaning. Lots of bobs and bits, including > chainrings (oooh!) and shiny levers (a!) and even a few shifty

[RBW] Re: Things I Feel Guilty About: Bike Life

That is funny! There is some insistence early on to get the ones we are close to involved with our cycling lifestyle. Fixed up a bike for a crazy girlfriend way back when from a bike I bought used with a bent fork. Replaced the fork. She may have rode it once or twice. I don't remember. We

[RBW] Brought Home A New Puppy!

Got back from a very eventful trip to Chicago. While there was at the REI in Lincoln Park browsing around. Was at the service area and chatting with the guy behind the counter inquiring about cable donuts and saw a bin of stuff with a couple frames. They were going to be recycled and the top

[RBW] Re: Free: Susie Frame

Benjamin, Do you still have the Susie frame and fork? Thanks, Reginald Alexis On Saturday, June 4, 2022 at 3:20:02 PM UTC-5 benjami...@gmail.com wrote: > [image: image.jpg][image: image.jpg][image: image.jpg] > > On Saturday, June 4, 2022 at 3:48:41 PM UTC-4 Kainalu V. -Brooklyn NY > wrote:

Re: [RBW] Lambda Add-ons

y, January 25, 2023 at 11:02:01 AM UTC-6 Minh wrote: > i'm a little behind on my riv news, can anyone confirm if these will fit > the grip king/lamda, non-monarch pedals too? > > On Tuesday, January 24, 2023 at 12:26:11 AM UTC-5 R. Alexis wrote: > >> Thanks for posting this pi

Re: [RBW] Lambda Add-ons

Thanks for posting this pic. I didn't know that Rivendell had the Grip Monarch/King pedal wings made and in stock. Been waiting for them to mount on the Grip Kings I have. Went ahead and ordered the Silver 2 shifters and mounts while I was at it. Should be here tomorrow. Thanks, Reginald

[RBW] Re: Nice Rivendell, Goodrich and Sevens for Sale

The orange one is possibly an Allrounder. They had horizontal rear drop outs Looks like a nice collection. Thanks, Reginald Alexis On Monday, January 23, 2023 at 11:42:52 AM UTC-6 mmille...@gmail.com wrote: > Hey all. A local STL fellow just posted some bikes >

[RBW] Re: New build: 1985 Bridgestone MB-2

Eric, Nice build! Very well thought out. Nice video on the build also. Been looking at bike builds on YouTube. Yours is one of the better ones. Have fun on it. Thanks, Reginald Alexis On Monday, January 23, 2023 at 5:06:27 PM UTC-6 eric...@gmail.com wrote: > [image: MB-2 230115 S 00

[RBW] Re: Sam Build - Wish Me Luck!

Congratulations How exciting when the planning and futzing over the bike and parts finally come together. Any changes in parts and such while thinking over the build? I know when I built the Rivendell Mountain I went back and forth on several items. Thought of doing an 8 speed freewheel,

[RBW] Re: First Ride of 2023

I don't know that it counts, but I took a short post build roll on a Trek 5900 OCLV carbon (Issue Bike) that I rebuilt. Rode it several blocks last night and this afternoon. A bit rainy here today. May have gone longer if it was not. here is to getting out on the bike in 2023, however you can.

[RBW] Re: Roller-Cam brakes

Willet, Nice bike. Pretty sure we have chatted before regarding Deluxe Bikes in Lincoln, NE. That is where I got my MB-0(Zip). Got word of that frameset from a shop manager I worked under. Was deciding on either a Trek something or another, probably 930 complete or the Zip. The discount price

[RBW] Re: Roller-Cam brakes

Hey James, Looks like you got one of those smoke chrome Schwinns. I have one. Got it from a friend in trade for some bike work. Was her fathers. Don't know if he was the original owner or just acquired it. I haven't gotten to work on it with work and the many other bike projects. I do have

Re: [RBW] Re: Gus front derailleur reccomendation needed

Looks like your pic was posted at the same time I was typing this reply. Looks like the 110-113 bb is what is needed. Good luck with the build. Thanks, Reggie On Sunday, December 4, 2022 at 11:26:42 AM UTC-6 R. Alexis wrote: > Hey Jacob, > > You say: > > "I'm using a tr

Re: [RBW] Re: Gus front derailleur reccomendation needed

Hey Jacob, You say: "I'm using a triple crankset (42/32/22 Ritchey)" and state it is a 110 bcd. >From the ring sizes and the bottom bracket, it would seem that this is a 94/58 or 56 BCD crank. Lowest you can probably get the middle on a 110 bcd is 34 usually, possibly heard of a 33 and the

[RBW] Re: Cockpit Quandaries - Friction bar ends for a new rider

Paul, Sorry to be late to the party. That Specialized looks to be in decent condition. My thought was to lean into replacing just what is needed. In this case I would go with replacing the bars and shifters. The derailleurs that are on there probably will do just fine. Getting some 7 speed

[RBW] Re: When the Rivs are sold out and you need a bike for daily commuting...

The grips should come off fine. Just stick a slim, long flat screwdriver under it, then spray some alcohol in under it to loosen it. Should slide off fine. Can use the same solution or hairspray to slide on new bars. Thanks, Reginald Alexis On Saturday, November 19, 2022 at 2:05:28 PM UTC-6

[RBW] Re: WTB/ISO Crust Juan Martin Bars for 1993 Bridgestone XO-2

Nice build. is the crank 110 BCD? Must be with the 33 ring. The bar set up is interesting. Thanks, Reginald Alexis On Monday, November 21, 2022 at 9:30:50 AM UTC-6 e.q.s...@gmail.com wrote: > Looking to switch to flat-ish bars on my Bridgestone XO-2. Its a little > small for me, so I am

[RBW] Coroplast season!

Hello folks. Looks like coroplast season is apron us. Anyone got any projects/crafts planned for these? I picked up some discarded ones this past week. Plan on using it on a small duffle that I had straps added to make into a handlebar bag as a shaper. Reginald "Repurposer" Alexis -- You

[RBW] Re: Rat Trap Pass

What are the wheel qr skewers n that bike? Just curious. Reginald Alexis On Thursday, September 1, 2022 at 3:19:37 PM UTC-5 tommc...@gmail.com wrote: > > That is the max width with fenders... > > both Handsome Cycles and others have shown it possible, I'm currently > running the Vans X Cult

[RBW] Re: Brooks Cambium mod advice

I wonder if shoving the edge of a flathead screwdriver under to catch the side of a square under the rivet will help to keep it from turning in order to unscrew it? Thanks, Reginald Alexis On Thursday, September 1, 2022 at 9:43:07 AM UTC-5 brok...@gmail.com wrote: > Does anyone here have

Re: [RBW] Re: Rolling on the Rivendell Mountain

and it came to me with similar drivetrain >> components-- triple Logic cranks, XC short cage rear der, and Suntour >> mountain front der. Those are the only original parts that remain on mine. >> Are you the original owner of yours? Thank you, >> -Gabe >> [image: Mountain1.jpg]

[RBW] Re: Rolling on the Rivendell Mountain

ald: at the risk of asking a dumb question..what is that > mirror-like thing clipped to the top tube behind the headset? > > On Sunday, August 21, 2022 at 10:35:11 PM UTC-5 R. Alexis wrote: > >> Did the Corporate Cycling Challenge today, >> https://showofficeonline.com/Corporat

[RBW] Wanted: Nitto Lamp Holder 2-70

Hello List Members, Does anyone have a Nitto Lamp Holder 2-70 they want to sell or trade? Actually need two for a couple projects. Thanks, Reginald Alexis -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group

[RBW] Re: Free for postage: cheap (but nice) "Tifosi" sunglasses

Whoever got these, I have a zippered case along with microfiber storage/cleaning bag that you can have. One less thing hanging around my house. Let me know. Same deal, free for postage. Thanks, Reginald Alexis On Sunday, June 12, 2022 at 5:33:24 PM UTC-5 Patrick Moore wrote: > I will add

[RBW] Re: That new rear derailer

This rapid rise deraileur sounds and looks intriguing. I have a couple of Shimano RD-C201 Mega-Range Rear Derailleur 8-Speed, Rapid Rise Silver. I have wanted to try it, but don't have anything to do so on in my personal use stable. My put it on some junk bike I have just for fun. Look forward

[RBW] Re: WTB: Silver Crank Arms - 178mm

David, Where are the cracks formed? My guess it is in the webbing between the crank arm and the chainring mounting arm? Is it possible to file the crack out to avoid it spreading? Thanks, Reginald Alexis On Thursday, May 26, 2022 at 12:11:15 PM UTC-5 David B wrote: > Been a while since I've

[RBW] Wanted: Velo Orange Cigne stem 70mm

Hi RBW members, I am in need of a Velo Orange Cigne stem in 70mm. Preferably in the nickel finish. Realizing that the custom Groovy Cycles LD stem on my OX Brand ti Cruiser 29er is a tad too long and wanting to swap it out to use on an Ibis Mojo build. Let me know what you may have. Thanks,

[RBW] Re: 1996 Riv All Rounder update

> cogs. What I've read is Sram is compatible with Shimano index wise. > > On Riv mountain frames, wonder how many were made and how different they > might be from the All Rounder. Sloping top tube makes sense, maybe > slightly more relaxed front geometry? > > On Thursday, Nov

Re: [RBW] Re: Free: miscellaneous blinkies

Moore wrote: > Sorry, Reginald, they have been claimed. > > On Thu, Nov 12, 2020 at 9:35 PM R. Alexis wrote: > >> Patrick, >> >> I will take them. I have two fronts that I can pair with the two rears >> you have. >> >> Thanks, >> >>

[RBW] Re: 1996 Riv All Rounder update

John, Nice looking bike. I have a Rivendell Mountain in single color silver from that era I got from Rivendell. It has a sloping top tube. When I ordered it I wanted the option of possibly using dirt drop bars on it. There have been times I wish I would have gotten the cream contrasting

[RBW] Re: Free: miscellaneous blinkies

Patrick, I will take them. I have two fronts that I can pair with the two rears you have. Thanks, Reginald Alexis On Thursday, November 12, 2020 at 5:34:14 PM UTC-6 Patrick Moore wrote: > Front/white clip on, bright; 2 whole and 1 partial button blinkies that > use wafer batteries; old,

[RBW] Re: Talk Me Out of Building My Own Wheels

Steven, Go for it! I have built, rebuilt and trued up and redished many a wheel. Built my first wheelset using Wilderness Trail Bikes Classic Grease Guard freewheel hubs with Mavic 217, 26" rims for my 1991 Bridgestone MB-0(Zip) frameset. I worked at a bike shop at the time so I had The

[RBW] Re: FT: SR Sakae CTP-400

Price bump. $20 shipped. Thanks, Reginald Alexis -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view

[RBW] Re: FT: SR Sakae CTP-400

I have these pedals for sale now. $30 shipped. Thanks, Reginald Alexis On Tuesday, July 28, 2020 at 1:07:50 AM UTC-5 R. Alexis wrote: > Rivendell Owner Bunch List Members, > > In an effort to fine tune my bike I offer some used SR Sakae CTP-400 > pedals for trade. They are

[RBW] Wanted: Mirrycle Incredibell Bar End Bell

Looking for a Mirrycle Incredibell Bar End Bell to replace an older bar end bill with a striker. If you have one you want to sell or know of a shop that has one let me know. Thanks, Reginald Alexis https://www.bikeworldiowa.com/product/mirrycle-incredibell-bar-end-bell-188543-1.htm -- You

[RBW] Velo Orange Sabot Pedal info

RBW List Members, I have been eyeing the Velo Orange Sabot Pedal for a while. Looking at it to replace the SR CTP-400 pedals I posted about a few days ago. Looking at mounting some half clips on them for use. Anyone using this pedal with or without clips? What are your thoughts? Any

[RBW] FT: SR Sakae CTP-400

Rivendell Owner Bunch List Members, In an effort to fine tune my bike I offer some used SR Sakae CTP-400 pedals for trade. They are track style pedal. If I remember correctly, these came standard on some Bridgestone models. They have a silver body with black cages. Pretty sure I got them with

[RBW] Re: Dirt droppish questions for smallish impulse buy

Hello!, I have ridden a couple dirt drops the original Wilderness Trail Bike/Specialized/Nitto RM-3 Dirt Drop bar https://www.somafabshop.com/shop/product/nitto-handlebar-rm3-dirt-drop-2758?page=2=977. I have them on both my WTB Phoenix Steel and Ti along with my OX Brand Ti Cruiser with two

[RBW] Bicycling Influence

RBW List Members, Just wanted to share an article a friend posted on her website. http://onemoreexclamation.com/for-the-love-of-biking/ Happy Reading.

[RBW] FS. Rivendell Quickbeam and Bridgestone MB-1 (Not Mine)

RBW List Members, Friend, shop owner and Rivendell Bicycle dealer Sarah of Omaha Bicycle Company www.omahabicycleco.com has a couple bikes she is selling. First is a Rivendell Quickbeam complete. I believe the frame size is a 56cm. Has drop bars and I think a dingle set up with a fix cog on

[RBW] Re: Original Rivendell Mountain Bike

I have a Rivendell Mountain also. It was supposed to have it's own proprietary lug set. Looks like there was not enough interest in the Mountain and more in the Road and Allrounder that going with it's own lug set was not feasible, so they used the Allrounder lugs with stouter tubing, sloping

[RBW] Re: Rivendell tinkering..

Craig, Your Rivendell Allrounder looks great in all its versions. My Rivendell Mountain is of the same era. It has stayed mostly the same build since I initially built it. I see you are running a SRAM X9 rear with what looks like friction dowtube shifters. Do the shifters allows you to run

[RBW] Re: WTT Paul Neo-Retro for Touring

think it'll work we can probably figure out a more than > fair price. > > On Saturday, October 20, 2018 at 1:49:48 PM UTC-4, R. Alexis wrote: >> >> No response on the a trade. Willing to buy a set (one wheels worth) Paul >> Touring brakes in silver. Willing to consider ot

[RBW] Re: WTT Paul Neo-Retro for Touring

the list. Thanks, Reginald Alexis On Tuesday, October 16, 2018 at 1:11:03 AM UTC-5, R. Alexis wrote: > > RBW list members, > > I am looking to trade one wheels worth, good condition Paul Neo-Retro in > silver for some Paul Touring in silver. Got a bikes worth off the li

[RBW] Re: Quick removal of full-coverage fenders

A number of years ago Bontrager (Trek) had a truly full coverage, quick release fender. They only had it for about 3 years and discontinued it. I worked for a Trek dealer at the time and it looked like a good product. It seemed to work well. Don't know if the test of time determined they didn't

[RBW] Re: Frankendini

Joe, Frankendini 2 looks good. I meant to post when you had picks of the original build with the original Softride stem. I think that one was the warranty recall stem. I had gotten one, used and Softride warrantied it and I got a gold aluminum Aheadset style one as a replacement. There was an

[RBW] WTT Paul Neo-Retro for Touring

RBW list members, I am looking to trade one wheels worth, good condition Paul Neo-Retro in silver for some Paul Touring in silver. Got a bikes worth off the list a bit ago and want the Touring for the rear of a bike build I am working on. Let me know what you have. Will consider other

Re: [RBW] Recomendations For Cycling-Specific Vehicle

The Honda Element seems to be a big go to for shop owners. A shop owner friend has one. She had a company owned one at the prior shop she managed and fell in love with it. Her prior car was a Subaru Outback. Another shop owner friend has one also. Twelve years ago when I was forced to look for

[RBW] Re: Would it be fun to have an all SILVER group?

I thought I had some on my phone, but I don't of that bike. Will have to take some pics and post them. I know that Sarah at Omaha Bicycle Company took some photos a few years ago and posted them on facebook, instagram or sum such, but not of the full bike. Will try to get that done soon.

[RBW] Re: Would it be fun to have an all SILVER group?

I have had thoughts of rebuilding my Rivendell Mountain with not necessarily Rivendell Silver parts, but with Rivendell designed or special parts like the Phil Wood Rivvy hubs, Rivendell Grip King/MKS Lambda pedals, Silver thumb shifters. My bike is built with a mix of late generation SunTour

[RBW] Re: Weight weenie report. Dia Compe 980 brakes

The new Dia-Compe 980 brakes look interesting. I have the original Dia-Compe 980 brakes, http://velobase.com/ViewComponent.aspx?ID=D2AA4D24-29A3-4F50-B3CD-C789F21E144E=117=144 in use on my 1994 Bridgestone MB-1 retro build and on my 1987 Schwinn Voyageur 27" to 700c conversion. Don't know why

[RBW] Re: Riv and the Wright Brothers

Gary was the point person for Rivendell at Waterford at that time. I remember getting a call from him to finalize what color I wanted my Rivendell Mountain. His Cycles Gaansari 29er was pretty nice. Reginald Alexis On Sunday, March 4, 2018 at 6:36:09 PM UTC-6, RichS wrote: > > John, > >

[RBW] Re: Suntour Power Thumb Shifters

I have some SunTour XC friction shifters in use on my 1994 Bridgestone MB-1 retro build. They along with a bunch of other parts originally were on my 1986 Mongoose ATB that I ended up warrantying. The shifters were on the replacement 1991 Mongoose IBOC Sport before I changed them out for index

Re: [RBW] Re: Discs versus calipers

You mention the steerer strength is between 1" and 11/8" threadless. Has anyone given any thought to possibly the superior strength of 1" steerer that Rivendell is possibly using that was not used years past? Both Grant Peterson in early Rivendell Readers possibly and for sure Keith Bontrager

[RBW] Re: Lost & found anything while riding?

I have found plenty of stuff riding, walking and driving over the years. While riding I have found various tools. Of note, a long, non rachet socket wrench. Found a flip cell phone once on a walk during lunch. The battery was dead. Finally charged it and called the best number on it to get it

Re: [RBW] Re: What do Rivendell Riders use for thumb shifters?

As mentioned before, using Shimano Deore XT/DX thumb shifters on dirt drop equipped WTB Phoenix and Suntour Command Shifters on the WTB Dirt Drop equipped OX Brand Ti Cruiser 29er. I also have some early SRAM Grip Shift rotational Road/Mountain shifters on my 1993 Bridgestone XO-1 on some Nitto

[RBW] Re: What do Rivendell riders use for GPS computers?

I personally don't use anything at the moment. I haven't even replaced the dead battery in my Cateye wireless or got to the point of mounting on of the Trek Time simple cycle computers on any of my bikes. A friend of mine that I have been riding with lately uses her Apple iWatch along with her

[RBW] Re: What do Rivendell Riders use for thumb shifters?

I am using Suntour XC-Pro/Comp/LTD thumbies on several bikes. Using friction Suntour XC thumb shifters on my 1994 Bridgestone MB-1 retro build and Shimano Deore XT/DX thumb shifters on Wilderness Trail Bikes (WTB) shifter mounts on a couple WTB Dirt Drop WTB Phoenix bikes. I like the friction

[RBW] Re: WTB - Riv Fork; 26" wheel canti

Another option in line with what has already been mentioned, Find a suspension fork crown that works for you and allows legs to be bolted to it and have a builder make a legs that will fit it. It does not have to be the Bontrager/Rock Shox one. It can be a later Rock Shox one with just the bolt

[RBW] Re: WTB - Riv Fork; 26" wheel canti

ald Alexis On Monday, April 17, 2017 at 4:28:52 PM UTC-5, R. Alexis wrote: > > I recall someone on the RBW or iBOB list posting about getting a > replacement fork for a 1993 Bridgestone XO-1 from Handsome Cycles by buying > one that was used on the XOXO. One of the issues was there is a re

[RBW] Re: WTB - Riv Fork; 26" wheel canti

I recall someone on the RBW or iBOB list posting about getting a replacement fork for a 1993 Bridgestone XO-1 from Handsome Cycles by buying one that was used on the XOXO. One of the issues was there is a reverse peak or point that projected down in the middle of the fork crown toward the tire

[RBW] Re: Rivendell ThumbShifters?

It was mentioned on this list, but I don't think I ever ran across an e-mail or posting that the project was not going through or had changed. May have come in an e-mail and went to my junk folder and I never saw it. I definitely was interested in getting a couple. Had given the Silver on Soma

  1   2   >