Hi,
I have trouble scanning images with the following configuration:
HP ScanJet 4100C -- Linux 2.6.3 -- SANE 1.0.13
When I was using Linux 2.4.19, everything worked fine, but as of 2.6.3,
I cannot use the scanner kernel module anymore.
The scanner can either not be found, or when it's found, I
Hi all,
I have a HP scanner C6270A rev 3828. Here's the output of
/proc/scsi/scsi:
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: HL-DT-ST Model: CD-RW GCE-8481B Rev: 1.10
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 03 Lun:
On Wed, 2004-03-17 at 15:08, Johannes Niediek wrote:
Hi,
I have trouble scanning images with the following configuration:
HP ScanJet 4100C -- Linux 2.6.3 -- SANE 1.0.13
When I was using Linux 2.4.19, everything worked fine, but as of 2.6.3,
I cannot use the scanner kernel module anymore.
Gerhard:
Well, I took your advice and did a CVS checkout of the sane-backends. I
compiled, installed,
scanned, and the results were ...
beautiful. I can't believe how good it looks. I scanned a small photo (two by
three inch) at 600
dpi and it looks perfect.
Thanks to everyone working on
I am running a vanilla Fedora Core 1 and I think I have implemented all
the advice I have found in the mailing list and elsewhere. I have come
to the point where the sound leads me to believe that it scans correctly
- at least black/white (line art). However, the scanned image is all
black. When I
Hi,
this is a HP SanJet 62x0C. What SCSI-controller are you using ? Is it a
Buslogic ?
--Peter
Yao Ko schrieb:
Hi all,
I have a HP scanner C6270A rev 3828. Here's the output of
/proc/scsi/scsi:
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: HL-DT-ST Model: CD-RW
On Wed, 2004-03-17 at 14:14, Peter Kirchgessner wrote:
Hi,
this is a HP SanJet 62x0C. What SCSI-controller are you using ? Is it a
Buslogic ?
I'm using Advansys SCSI Host Adapter
Thanks,
Yao
Hi,
On Tuesday 16 March 2004 15:16, Christopher Marshall wrote:
[SNIPSNAP]
I am curious as to what the problem was, though, that was fixed.
The problem was the lamp-calibration, which has not been correctly
done in the previous versions. Thanx to monty for the patch to make
it work...
Ciao,
Hello,
Would anyone happen to know if the Avigramm minidoc usb is supported
by any of the backends currently available. The output of
sane-find-scanner is:
USB scanner (vendor=0x05cb, product=0x1483) at
libusb:/dev/usb0:/dev/ugen0
Thanks in advance,
Matt