i've put the full logs of the nikonscan communication with the coolscan LS50ED
in
http://cvs.fzk.de/~ariel/linux/scanner/cs2usb.log.gz
http://cvs.fzk.de/~ariel/linux/scanner/cs2usb.cleaned.log.gz
Thanks a lot Ariel. I have no time at all these days, anyone like to
volunteer to have a look?
I try to get work Benq 5000 scanner, but it does not work:
# scanimage -L
device `snapscan:libusb:001:002' is a Acer FlatbedScanner22
flatbed scanner
[root@server tmp]# scanimage some.out
[snapscan] Scanner warming up - waiting 32 seconds.
scanimage: open of device snapscan:libusb:001:002 failed:
On Wednesday 09 February 2005 13:39, Vitaly Lipatov wrote:
I try to get work Benq 5000 scanner, but it does not work:
# scanimage -L
device `snapscan:libusb:001:002' is a Acer FlatbedScanner22
flatbed scanner
[root@server tmp]# scanimage some.out
[snapscan] Scanner warming up - waiting 32
Disable the option quality calibration
Thank, you that did the trick.
Ingo.
Eric Firing efir...@hawaii.edu wrote:
Maybe it is indeed a different problem. I used modprobe -r to unload
ehci-hcd, but the scanner still times out with an IO error:
[efiring@manini efiring]$ dmesg | tail -6
usb 2-2: usbfs: USBDEVFS_BULK failed ep 0x2 len 6 ret -110
usb 2-2: bulk timeout
Julien,
It is libusb-0.1.so.4.4.0 from the Mandrake 10.1 rpm,
libusb0.1_4-0.1.8-2mdk.
Eric
Julien BLACHE wrote:
Eric Firing efir...@hawaii.edu wrote:
Maybe it is indeed a different problem. I used modprobe -r to unload
ehci-hcd, but the scanner still times out with an IO error:
I changed to USB abter finding the proper cable finally. But
when I run scanimage, this is what I get.
insmod: /lib/modules/2.4.24-xfs/kernel/drivers/media/video/bttv.o:
insmod char-m
ajor-81 failed
insmod: /lib/modules/2.4.24-xfs/kernel/drivers/media/video/bttv.o:
init_module:
Eric Firing efir...@hawaii.edu wrote:
It is libusb-0.1.so.4.4.0 from the Mandrake 10.1 rpm,
libusb0.1_4-0.1.8-2mdk.
This version should work, 0.1.9 being the latest ...
JB.
--
Julien BLACHE http://www.jblache.org
j...@jblache.org
Hi Folks. First time on this list and first time with a scanner.
Scanner is Mustek 1200CP+ . Running on FC2 with Kernel 2.6.9-1.6_FC2 and later
kernels from planetccrma for music software.
Sane version: SANE-1.0.15
Xsane version: 0.92
Problem1.
I can only start Xsane from the command line as
Hello Terrence,
USB should be easier to use than using the parallel port. If the scanner
did start scanning, you have all the modules you need.
scanimage writes the scanned data to stdout. Maybe this is your
gibberish. Just start scanimage with an output redirection:
scanimage image.ppm
To
I try to get work Benq 5000 scanner, but it does not work:
# scanimage -L
device `snapscan:libusb:001:002' is a Acer FlatbedScanner22 flatbed scanner
[root@server tmp]# scanimage some.out
[snapscan] Scanner warming up - waiting 32 seconds.
scanimage: open of device snapscan:libusb:001:002 failed:
Julien BLACHE wrote:
Eric Firing efir...@hawaii.edu wrote:
Maybe it is indeed a different problem. I used modprobe -r to unload
ehci-hcd, but the scanner still times out with an IO error:
It could be the USB controller hardware and whatever firmware it has.
I have had serious problems
12 matches
Mail list logo
