--=-=-=
Till Kamppeter till.kamppe...@gmx.net writes:
libusb: 0.1.8
kernel: 2.6.11
I am trying to get an Epson Perfection 2450 and 4180 to work on the
distro mentioned in the subject.
At first I tried /home/test/iscan-1.14.0-3.i386.rpm, but iscan had a
long delay to start up with both
the scanner is connected but sane doesn't find it.
cat /proc/bus/usb/devices show up with
T: Bus=3D01 Lev=3D01 Prnt=3D01 Port=3D01 Cnt=3D01 Dev#=3D 2 Spd=3D12 MxC=
h=3D 0
D: Ver=3D 1.00 Cls=3D00(ifc ) Sub=3D00 Prot=3D00 MxPS=3D 8 #Cfgs=3D 1
P: Vendor=3D03f0 ProdID=3D0401 Rev=3D 1.00
S:
Hi All,
I have the following piece of code: (kindly ignore the declarations..)
options =3D sane_get_option_descriptor(handle, index); //index points to
mode option
int j=3D0;
if(options!=3DNULL)
{
while(options-constraint.string_list[j])
{
On Sun, 19 Jun 2005 20:43:20 +
quentin thornton qthorn...@hotmail.com wrote:
I presume the driver will not be effective if I have it plugged into
the wrong port.
Indeed not. You will need a SCSI adapter, either the one supplied with
the scanner or a third party one. In the latter case you
mohit, perhaps you mean
else {
//now for color
j++;
}
note the braces.
allan
On Mon, 20 Jun 2005, Mohit Kumar wrote:
Hi All,
I have the following piece of code: (kindly ignore the declarations..)
options = sane_get_option_descriptor(handle, index); //index points
Sorry for the confusion Allan. But no its not the case. Rather it is
the following:
else
{
//now for color =20
}
j++;
Thanks,
Mohit
On 6/20/05, m. allan noah an...@pfeiffer.edu wrote:
=20
mohit, perhaps you mean
=20
else {
//now for color
=20
try running it under gdb and take a backtrace?
allan
On Mon, 20 Jun 2005, Mohit Kumar wrote:
Sorry for the confusion Allan. But no its not the case. Rather it is
the following:
else
{
//now for color
}
j++;
Thanks,
Mohit
On 6/20/05, m. allan noah
Hi,
On Tue, Jun 14, 2005 at 04:05:54PM +0300, Tuukka Pasanen wrote:
Hi again,
I tested new gt68xx driver from homepage and it worked (time for new
sane-backend release?).
Once the the genesys backend is included it's indeed time for the next
sane-backends release.
So Packard-Bell Diamond
On Sat, 18 Jun 2005 Jens Gulden m...@jensgulden.de wrote:
[...]
Try
./unpaper -vv --layout double --pre-rotate 0 --post-rotate 0 04b.pgm
unpaper04.pgm
OK.
[...]
I have also tried to find some other settings which make your original
image better. Try e.g.
unpaper -vv --layout
hi
Once the the genesys backend is included it's indeed time for the next
sane-backends release.
will there also be support for the gl841 as used in some Canon LiDE
scanners?
As i do not programm i'm willing to do any support work i can do to make
this scanner work with sane (test scans,
Hi,
Am Montag 20 Juni 2005 09:23 schrieb
sane-devel-requ...@lists.alioth.debian.org:
If I understand correctly, you meet 2 issues:
- 16 bits scanning gives noise picture.
well, that depends on which color depth xsane uses but read below.
- every second scan stalls
I now
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi just wondering what was happening about this particular chipset (i have a
canon LIDE 35) and if their is anything i can do to help? i am a happy c coder
but am new to SANE.
if thier is something i can do to help even if it is just testing then
12 matches
Mail list logo
