Hello,
O.S. Fedoracore 4 kernel 2.6.11
Up to now I have not managed to run xsane.
here are the results of
sane-find-scanner:
# No SCSI scanners found. If you expected something different, make sure
that
# you have loaded a SCSI driver for your SCSI adapter.
# Also you need support for SCSI
Since it seems I may not be able to get my Lexmark to work,
perhaps I should bring up the problem I was having that caused me to go
get the Lexmark in the first place, and see if someone might see
something I missed.
I had an HP that was working fine with sane, but it suddenly
Hi,
On Tue, Nov 15, 2005 at 11:56:12PM +0100, Till Kamppeter wrote:
I think the code must be also changed (genesys_devices.c, at the end of
that file).
If this is possible, it would be great. Patches welcome.
Just look at that file. Adding the vendor/product ids is simple. This
should get
Hi,
I have just installed Plustek OpticSlim 2400 usb scanner. I added this
line to /etc/hotplug/usb/libsane.usermap
# Plustek|OpticSlim 2400
libusbscanner 0x0003 0x07b3 0x0422 ...(zeros as in other lines)...
Without this line I was unable to use this scanner from non-root account.
I hope it
Oliver Schwartz a ?crit :
Hi,
I've now adapted the quality calibration code for the 2480 and enabled
it for the 3490. It's a pitty that you solved the problem already ;-)
otherwise it would be nice to know if quality calibration solves it,
too
The code is in CVS now, it should show
Hello,
Below are some details of the CanoScan 3200F USB commad set
and a request for assistance. As you can see from the command
set descriptions, they are a rather complex set and when
the protocol is added (the proper ordering of all the
commands, HW writes and Bulk writes) you see that the
Hi,
- at 2400 dpi :
I have done several try, at least a dozen.
Sometimes it's all dark, sometimes all white, sometimes a
succession of colored bands, and sometimes I have a good scanning,
but at least it doesn't scale the entire selection I have made on
the preview screen. And I have always