On Thursday 24 January 2008 16:24:29 Thierry Leconte wrote:
I try to use a plustek 9630P on a fedora 8 but :
1) it is detected as 600/600P
2) scaning an image just doesn't work
PJ : the debug output of scanimage -d plustek_pp:/dev/partport0
What could I try ?
Hard to say. For some
OK, but via which register is it programmed. I find nothing in GL842 datasheet
for frontend.
regards
Guillaume
Selon Pierre Willenbrock pierre at pirsoft.dnsalias.org:
Guillaume Gastebois schrieb:
Hello,
OK,
I open my LiDE 90 (very hard not all to destroy...).
I find these IC's :
On Friday 01 February 2008 09:18:20 Guillaume Gastebois wrote:
OK, but via which register is it programmed. I find nothing in GL842 datasheet
for frontend.
check for register 0x04
Layout:
Bit 7 |Bit 6 |Bit 5 Bit 4 |Bit 3 Bit 2 |Bit 1 Bit 0
LINEART |BITSET |AFEMOD[1:0] |FILTER[1:0]
Hello,
On Jan 31 16:13 Kjartan Maraas wrote (shortened):
The norwegian bokm?l locale was renamed from no_NO to nb_NO some time
ago and I'd like to see this change reflected in the sane-backends
translation as well.
Please rename no.po to nb.po and change any corresponding entries in
On Friday 01 February 2008 10:37:58 Johannes Meixner wrote:
Hello,
On Jan 31 16:13 Kjartan Maraas wrote (shortened):
The norwegian bokm?l locale was renamed from no_NO to nb_NO some time
ago and I'd like to see this change reflected in the sane-backends
translation as well.
Please
Guillaume Gastebois schrieb:
OK, but via which register is it programmed. I find nothing in GL842 datasheet
for frontend.
regards
Guillaume
the analog frontend is programmed through the serial interface accessed
by address registers 0x50(FERDA)/0x51(FEWRA) and data registers
go ahead. I think i am going to end up delaying the release for
personal reasons, so this wont hurt anything...
allan
On 2/1/08, Gerhard Jaeger gerhard at gjaeger.de wrote:
On Friday 01 February 2008 10:37:58 Johannes Meixner wrote:
Hello,
On Jan 31 16:13 Kjartan Maraas wrote
Hello
I try fix-cancel.patch - now backend work more correctly.
Regards,
tropos
--
View this message in context:
http://www.nabble.com/Error-in-HP-LaserJet-M1005-Backend-tp15127315p15230285.html
Sent from the SANE - Dev mailing list archive at Nabble.com.
Seeing that people now 'have their eye in' for the GL842, I've taken a
quick log using Benoit's sniffer on a win2k system from my Plustek 7200.
According to the sane-devl page this uses a GL842 ASIC and a AD9826 CCD.
The zipped log is on my demon homepages
To whoever would like this information:
I have added basic support for an Iriscan 2. By me saying I added support I
mean that I copied and pasted all the information from the Plustek OpticSlim
M12 section. It workd well with everything that I tried which includes scan
preview and scan
10 matches
Mail list logo