On Tuesday, 12. February 2008, Stefan Lucke wrote:
Register 0x6b is very different between GL841/2 and GL843. But the
documentation around the pins controlled with 0x6b is a bit lacking.
So we need to write reserved I/O bits, (0x6b) need to write to undefined
gamma addresses (0x5b/5c -
On Monday, 11. February 2008, Pierre Willenbrock wrote:
Did someone post the bcdDevice value of a LiDE 80? GL841 goes up to
3.0.5, as someone said, and GL842 begins with 3.0.6
bcdDevice of mine is 0302.
Reinhard
You are talking about writes like:
I guess YES.
Yes, I do.
Now I found the right one AND the right time: Before doing the reset ;-).
So now I've the initial motor movement with LED blinking and a scan
movement with green LED.
But no (strange) data arrives.
I tried your diff, but I
Am Monday, 11. February 2008 schrieb Stefan Lucke:
...
[genesys_gl841] reg[0x6b] = 0x02
[genesys_gl841] reg[0x6e] = 0x6d
[genesys_gl841] gl841_bulk_write_register: failed while writing command:
Invalid argument
scanimage: open of device genesys:libusb:001:010 failed: Invalid
ago with the LiDE 80. IIRC I got the motor working
by adjusting its base resolution (2400 instead of 1200 or something). But I'm
not shure it it was the only thing.
Regards,
Reinhard Biegel
Am Wednesday, 6. February 2008 schrieb Stefan Lucke:
Do you have some old sources of your changes ?
Playing with motor settings doesn't make a difference (at the moment).
Sorry, I trashed the sources because I messed something up and then nothing
was working any more. I planed to start over