Hello Stef
I have been on a summer holiday so I could not do the test earlier.
I downloaded the new version of sane-backends-genesys from your web page.
I configured it with |./configure --enable-libusb and then ran make|
I then attached and switched on the scanner,
changed to the backend
Hello Stef
Xsane registers the presence of genesys as a valid scanner
As far as I can determine, the HP driver for the 2400/g2410,
used via Xsane, supports 150, 200, 300, 60, 1200 dpi.
It does not support 50, 75, 100.
Perhaps there is a mechanical reason for this.
Re my previous post, I thought
Hello
I did a manual translation of the instructions in Portuguese that
Fernando found for installing a driver for these scanners that is freely
available from a company in India. I emailed this to the list yesterday.
I have now downloaded and installed this driver and everything works
fine
Hello
I know Portuguese so I have made a more free-form manual translation of
the instructions Fernando found on the Brazilian blog. Hope it helps. I
haven't tried it yet with my HP G2410.
Regards, Rob
_
Hi all!
I have
stef wrote:
Le Thursday 04 September 2008 18:34:28 Tof, vous avez ?crit :
Hi,
[genesys] WARNING: Your scanner is not fully supported or at least
[genesys] had only limited testing. Please be careful and
[genesys] report any failure/success to
[genesys]
Yes. Stef and I are working on the HP G2410 (that seems to be logically
equivalent to the HP2400c). These use the GL646_HP chipset. We have got
as far as doing a series of test scans with a local compilation of the
sane CVS. I sent the scanned image files to Stef on Thursday, which he
is
Stef
I have used gawk to analyze the the UsbSnoop log files for the HP G2410 scanner.
I have 3 files. One for colour scan, one for grey-scale scan, one for
monochrome scan.
I have made a .zip file for each of them.
colour.log.decode.zip (1.7 MB)
grey.log.decode.zip (1.4 MB)
Re: recent mails from: m. allan noah, amol verule, Volnei...
stef, please could you help?
I am using Ubuntu Linux 8.04 (Hardy Heron). I have a HP G2410 scanner.
It does not work with sane at the moment. I am trying to get the
information necessary to configure the sane back-end for this
I am using Linux (Debian: Ubuntu/Hardy Heron 8.04)
I have an HP G2410 scanner.
I have looked for technical information on the www for the HP G2410
scanner and its GL646_HP chipset. I have also found the scanner on my
computer using sane-find-scanner: found USB scanner (vendor=0x03f0
