On 5/6/07, Julien BLACHE j...@jblache.org wrote:
That's a question for Ilia ;) I think he did test everything as he has
the hardware, though.
The backend doesn't support scanning at 150 dpi yet, as its
functionality is similar to Windows driver, which uses only limited
list of scanner
On 5/8/07, Dale Amon a...@vnl.com wrote:
Do you have any idea why it would eject two pages
after it scans one?
The scanner in question is rather high level in terms of commands,
that means that I couldn't (at least, I didn't see such a possibility
from the traces on Windows) say 'feed the next
Okay, the actual build was a bit more involved that
you may have thought, but I got there eventually:
wget http://incoming.debian.org/sane-backends_1.0.19~cvs20070505-1.diff.gz
wget http://incoming.debian.org/sane-backends_1.0.19~cvs20070505-1.dsc
wget
Dale Amon a...@vnl.com wrote:
Hi,
I note that it really does not like the 150dpi which I
have been more or less standardized on for my scanning
for the last decade. I'll have to go to 200dpi. Is there
any reason it gives garbage output on 150?
According to the original announce, the
Dale Amon a...@vnl.com wrote:
Hi,
Thanks for all the help. Is there anything in particular
you'd like tested which I have not tested already?
That's a question for Ilia ;) I think he did test everything as he has
the hardware, though.
JB.
--
Julien BLACHE
Dale Amon a...@vnl.com wrote:
Hi,
I have had one of these collecting dust for almost two years, so this is
welcome news. There wouldn't be a hope in hell of running said patch
against Debian Etch libsane-1.0.18-5 would there?
You can grab sane-backends 1.0.19~cvs20070505-1 from
Dale Amon a...@vnl.com wrote:
Ah, I am seeing it now. Downloading...
Yep, I uploaded right in the middle of the dinstall run, hence the
empty directory you were seeing earlier :)
JB.
--
Julien BLACHE http://www.jblache.org
j...@jblache.org
I have had one of these collecting dust for almost two years, so this is
welcome news. There wouldn't be a hope in hell of running said patch
against Debian Etch libsane-1.0.18-5 would there?
I'm glad to announce new SANE backend 'hp5590' for HP ScanJet
5550/5590/7650 scanners. It's in ALHPA stage however its functionality
is near to complete (I hope):
- Support for all scan sources (flatbed, ADF, TMA). ADF duplex is also
supported, as well as TMA slides and negatives
- Support for
