there are 3 backends which support this machine. the one which lists
these two points is external to sane, so you might want to ask avasys
directly. of the other two, one is unmaintained, and the other is new,
so we may not be able to provide you with an answer.
maybe you can get one and tell us
I went to the epson-avasys web site and found they provide
these files for this scanner:
iscan-2.10.0-1.c2.i386.rpm
iscan_2.10.0-1.tar.gz
userg_revG_e.pdf
I have not trie their driver yet. Will let you know once I have the scanner.
JD
m. allan noah wrote:
there are 3 backends which support
I have made the part of epson2 backend that special for the Perfection 4990
scanner. Every thing should work, but more testing would be nice. I have too
made the part of the epson backend (the old driver) for 4990, but there are a
few thing not working, especial with the transperant unit.
What functionality is missing from this driver other than
1- film area guide mode not supported
2- IEEE1394 untested
Fredag den 28. December 2007 skrev Alessandro Zummo:
On Fri, 28 Dec 2007 09:18:49 +0100
Claus Boje claus at egehuset.dk wrote:
Davs
The epson perfection 4990 is working best with the epson2 driver.
Maybe this should bee change on the Supported Devices pages.
I never compiled a list
On Sat, 29 Dec 2007 00:08:53 +0100
Claus Boje claus at egehuset.dk wrote:
If I remenber right, then the epson2 driver has not been out with a release
yet, when it comes out you proberly will get some reports, I will keep an eye
on the list. The only reason I found your driver was because I
Davs
The epson perfection 4990 is working best with the epson2 driver.
Maybe this should bee change on the Supported Devices pages.
Best
Claus Boje
On Fri, 28 Dec 2007 09:18:49 +0100
Claus Boje claus at egehuset.dk wrote:
Davs
The epson perfection 4990 is working best with the epson2 driver.
Maybe this should bee change on the Supported Devices pages.
I never compiled a list of supported devices for the epson2 drive 'cos
I supposed
Hello
This scanner has a bug, it only reports maximum 3200 dpi back.
Here is a patch there will let this scanner be seen as a 4800 dpi
How do I get this patch in the next version of sane backends ?
This patch is make from sane-backends-1.0.17 and the the file needed to be
patch is
I've just started using sane via the Gimp with this new scanner.
Seems to work fine.
Sane thinks it is a GT-X800.
Michael Talbot-Wilson m...@view.net.au writes:
I've just started using sane via the Gimp with this new scanner.
Seems to work fine.
Sane thinks it is a GT-X800.
Actually, the scanner thinks it's a GT-X800 and SANE just tells you
what it's been told by the scanner ;-)
--
Olaf Meeuwissen
11 matches
Mail list logo