Hi,
could be a similar problem. But this time the SCSI interface is a
Initio-9100uw on FreeBSD 4.6.2.
--Peter
abel deuring schrieb:
Peter Kirchgessner wrote:
Hi,
seems to be a SCSI problem. Opening the SCSI-device is ok. Writing
seems also to work. But reading is a problem. You can
Peter Kirchgessner wrote:
Hi,
seems to be a SCSI problem. Opening the SCSI-device is ok. Writing seems
also to work. But reading is a problem. You can also have a look at the
system log messages. If there are errors reported from the SCSI drivers.
[hp] scsi_inquire: sending INQUIRE
greetings,
I've recently tried my HP ScanJet 5p scanner, that is attached to my PC
through an Initio-9100uw scsi interface. After recompiled
uuu $ uname -a
FreeBSD uuu.pmi 4.6.2-RELEASE-p4 FreeBSD 4.6.2-RELEASE-p4 #3: Wed Nov 13
08:23:20 CET 2002 tef...@uuu.pmi:/usr/src/sys/compile/UUU
Hi,
I'm not an HP expert, just some generic hints:
On Fri, Nov 15, 2002 at 11:42:16AM +0100, SITKEI Attila wrote:
uuu $ dmesg | grep pass0
pass0 at iha0 bus 0 target 2 lun 0
pass0: HP C5110A 3701 Fixed Processor SCSI-2 device
pass0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit)
Hi,
seems to be a SCSI problem. Opening the SCSI-device is ok. Writing seems
also to work. But reading is a problem. You can also have a look at the
system log messages. If there are errors reported from the SCSI drivers.
Sincerely
Peter
SITKEI Attila schrieb:
greetings,
I've recently