Karl Heinz Kremer k...@khk.net wrote:
Hi,
I'm about to receive a Perfection 636S, which uses the same command set as
the 636U. This means that I can (for the first time) actually debug this
problem myself. I can assure you that this problem will be fixed in a few
weeks.
Very good news !
Hello,
I made some sniff of the Canoscan5000f as requested. Files may be found a=
t :
http://home.gna.org/canoscan5000f/sniff
There is a very big amount of data included in these logs, and I am=20
tired of reading them :)
So I have 2-3 questions :
1) There are a lot of paragraphs containing :
:-))
=20
It hurts badly when reading them on a 75Hz screen :))
: 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
0010: 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f
=20
Hmm, seems that these are some lookup-tables - IMHO could be ignored,
as long, as your
I was wondering if the image data could be sent in may times, or if as
you suggest there is some calibration : indeed the Windows driver says :
lamp adjusment, please wait or something like that in French :)
Unlikely, all things are possible but the windows driver will be
reasonably
Sorry Ronald, but I was out of town for some time.
I'm trying to get a free domain for my dial-up, to be
able to acces my computer from anywhere. I don't have
a permanent internet connection :( and that's where
all my relevant/contact info is stored. I apologize
for the delay.
I want to send a
Hmm, seems that these are some lookup-tables - IMHO could be ignored,
as long, as your future driver will do the same...
Ok. It means that SANE will take care of that? (Sorry not very familiar
with SANE, and don't know what I have to do and what is already done.
But apparently with
On Thursday 08 July 2004 17:18, Thibault North wrote:
:-))
It hurts badly when reading them on a 75Hz screen :))
: 00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f
0010: 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f
Hmm, seems that these are some
Ok but :
- There are more thant 3 blocks which seems to be image data: 2 for
calibration and 1 for the picture ?
What is the format of the sent picture ? RAW ? it might be possible to
find this no? To be able to determine what size if may have.
For exemple : 100dpi, 1cm2 is about
David Stevenson wrote:
The scanner may scan more than asked for, and the front end will use
what it needs. 39x39 may scan as 40x40 or 64x64 or . It is also
possible that 100dpi scans as 150dpi. OK not that likely but be
prepared for it.
A colour scan is normally 24bits - 3 bytes per
This reply was meant to go to the list as well:
Begin forwarded message:
From: Karl Heinz Kremer k...@khk.net
Date: July 7, 2004 8:41:12 PM EDT
To: Peter Mark Guevarra pmsgueva...@yahoo.com
Subject: Re: [sane-devel] use of ICC profiles
Like so many great questions, your question can only
It may also help if you run this command before you start xscanimage:
export LANG=en_US.iso-8859-1
You need to run this in the same terminal in which you also start
xscanimage.
Karl Heinz
On Jul 3, 2004, at 5:01 AM, Julien BLACHE wrote:
Gene Stemple gen...@vtc.net wrote:
Hi,
bad news
Hello,
I'm having problems using my 9630P scanner on RH9.
Firstly, I've got the scanner connected to the PC with a parallel cable.
I then downloaded sane-backends-1.0.14 and sane-frontends-1.0.12 and did
./configure, make and make install on both. No problems so far.
My /etc/ld.so.conf has an
12 matches
Mail list logo