I don't have this folder on my system, libgphoto2/camlibs/
Does something have to be installed to have it?
Thanks,
-Martin
Dear Friends,
Ok, running Linux 2.6.12-rc2, libusb-0.1.10a.
I just bought an Epson Perfection 3490.
Obtained esfw52.bin from installing it on an M$ PC (where the
scanner works like a charm, I must admit).
Then hooked it up to my Linux box, installed said firmware file
and installed
Hi,
i am using an Mustek 1248UB, which is fully supported by gt48xx.
Operating System is OSX.
I installed all necessary packages for OSX and scanimage -L and
scanning with scanimage works.
But when i use an application, which uses the Twain-Sane-Bridge, the
scanner does something short and
Hi,
i am using an Mustek 1248UB, which is fully supported by gt48xx.
Operating System is OSX.
I installed all necessary packages for OSX and scanimage -L and
scanning with scanimage works.
But when i use an application, which uses the Twain-Sane-Bridge, the
scanner does something short and
On Sunday 11 September 2005 18:29, I wrote:
Is currently anyone working on this specific driver? If not, is there any
code to pick up? Any docs from HP someone already acquired? I would also
appriciate some hints/documentation about GL841/GL646 (which seems to be
related) [3].
Re-hi all,
I tried accessing the scanner on my oldpc from my newpc and also set
the permissions on the oldpc scanner device to chmod a+rwx
[root_oldpc] ll /dev/usb/scanner0
crwxrwxrwx1 root root 180, 48 Jan 30 2003 /dev/usb/scanner0
But I am getting the following open error message.
Hi
Daniel Franke schrieb:
On Sunday 11 September 2005 18:29, I wrote:
Is currently anyone working on this specific driver? If not, is there any
code to pick up? Any docs from HP someone already acquired? I would also
appriciate some hints/documentation about GL841/GL646 (which seems to be
Daniel Franke wrote:
On Sunday 11 September 2005 18:29, I wrote:
Is currently anyone working on this specific driver? If not, is there any
code to pick up? Any docs from HP someone already acquired? I would also
appriciate some hints/documentation about GL841/GL646 (which seems to be
related)
Hi!...
i've installed all packages (sane-backends, sane-frontends,
libieee1284, scan 6.0) and when i scan -C throw me this error..
Finding IEEE1284 ports...
parport0 (0x378): rawcptnblbytsweirq... OK (ecp-swe).
Detecting scanner:
Timeout: Scanner wakeup reply 1 (0x03 in 0x1f) - Status =
I am running a debian system with a manually compiled/installed 2.6.13
kernel.
I've built the plustek pp kernel module and use that. Scanimage can't
find the
scanner, unless it is specified on a -d option, or via an environment
default scanner
setting. Scanning in only works in lineart or
10 matches
Mail list logo