Hi,
I have been trying to use the latest saned trough busybox inetd. And I have ran
across some serious problems, if i run saned -d it works just fine both to
find and use the scanner, but as soon as i try to use it trough inetd it
refuses.
I running a cross compiler for saned.My run
Hi,
I have been trying to use the latest saned trough busybox inetd. And I have ran
across some serious problems, if i run saned -d it works just fine both to
find and use the scanner, but as soon as i try to use it trough inetd it
refuses.
I running a cross compiler for saned.My run
Le mardi 25 juillet 2006 01:00, Fred Odendaal a ?crit?:
The X1270 is not supported by the X1100 backend. You are somewhat
correct in your assumption of what is happening. The scanner is trying
to find the home position by scanning in the reverse direction - looking
for a set pattern off the
Hello,
I've put up an updated (codeflow+some tricks to extract picturs from
usblogs)
documention for genesys backend -for the GL646 part- at:
http://perso.modulonet.fr/~stefdev/sane/gl646-wip02.odt
I plan to add howt to fill the Genesys_Sensor struct with
Hi,
On 7/27/06, St?phane VOLTZ stef...@modulonet.fr wrote:
Hello,
I've put up an updated (codeflow+some tricks to extract picturs from
usblogs)
documention for genesys backend -for the GL646 part- at:
http://perso.modulonet.fr/~stefdev/sane/gl646-wip02.odt
I would like to know, how front-end gets the list of all available backends
on the system?
does it look directly into dll.conf file or communicates with sane daemon to
get the list of available backends?
Rupesh
--
Message: 5
Date: Wed, 26 Jul 2006 07:50:04 -0400
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi
I've got an Mustek 1200 CP Scanner wich is connected to my computers
parallelport. I'm using FreeBSD 6.0 and the sane-version from the ports
collection. This is actually version 1.0.17. According to
Hi,
Dura-Zell wrote:
[sanei_pa4s2] pa4s2_open: device `0x378` opened...
this looks good...
[sanei_pa4s2] pa4s2_readbyte_nib: reading value 0x77 from '0x378'
and this looks very bad. should be A5 or A8 or similar.
is your parallel port configured in EPP mode (maybe you can configure
that in