Hi all,
I'm trying to set up a shared scanner using saned to use it through my
private network. While it works like a charm when started in debug mode
(-d), I can't find my scanner (an HP PSC 1510) when stated through (x)inetd
Here's my setup:
The server (called server) has the scanner
The
Two different users. Try to su to the saned user, and run the daemon
in debug mode there. If it does not work, then saned user does not
have perms to access the device.
allan
On Sun, Feb 8, 2009 at 9:25 AM, Fred. Oger fred.oger at gmail.com wrote:
Hi all,
I'm trying to set up a shared
I would suggest you try to install Sane CVS, then you could use a
frontend like gscan2pdf to scan multi-page documents using ADF.
MF4370 has not been yet been reported to work with Sane, but the Sane
pixma ImageClass backend supports several other ImageClass devices, so
it's very likely that
Hi,
This does work when saned -d is started as user saned. So I guess the
trouble must be somewhere else.
Thanks anyway,
Fred.
m. allan noah wrote:
Two different users. Try to su to the saned user, and run the daemon
in debug mode there. If it does not work, then saned user does not
have
Hallo Pierre,
the testprogram gives me only an:
roland roland # /home/roland/Doku/G4010/testprog
Fatal: Device not found!
roland roland #
With #lsusb I can see the scanner. I
Best regards
Roland
Am Samstag 07 Februar 2009 21:55:11 schrieben Sie:
Roland Graf schrieb:
Hallo Pierre,
was
Roland Graf schrieb:
Hallo Pierre,
the testprogram gives me only an:
roland roland # /home/roland/Doku/G4010/testprog
Fatal: Device not found!
roland roland #
With #lsusb I can see the scanner. I
Best regards
Roland
Hello Roland,
either my guess for your device-id was
ok, the user works, so the environment must be different. Is the
scanner device owned by a group other than saned (maybe 'scanner')? If
so, you might need to enable the 'groups' option in your xinetd
config? Otherwise, you only get the default group...
allan
On Sun, Feb 8, 2009 at 9:53 AM, Fred.
/20090208/3b253719/attachment-0001.htm