merc1984 at f-m.fm writes:
I need to set saned to listen only on 127.0.0.1. But I've searched far
and wide and have not found any way to make it do this. The Listen =
127.0.0.1 imperative in saned.conf doesn't work.
Any way to do this?
Just make localhost the only entry in your
://lists.alioth.debian.org/pipermail/sane-devel/attachments/20121012/2be95030/attachment.html
merc1984 at f-m.fm writes:
On Thu, Oct 11, 2012, at 16:33, Olaf Meeuwissen wrote:
Just make localhost the only entry in your /etc/sane.d/saned.conf.
BTW, a Listen directive is normally used to restrict the *ports* on
which a daemon listens, not the hosts that are allowed to connect. To
--
An HTML attachment was scrubbed...
URL:
http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20121012/2de1aeba/attachment.html
On 10/12/2012 07:57 AM, Stef wrote:
these hardware information can help us to
find how close to another scanner a specific
model is. Since the ST24 is an unsupported GL646
scanner, it is not as helpful as it could have
been. Even when hardware is known, you'll have
to know exactly how
? ? ? ? ? ? to sane-devel-request at lists.alioth.debian.org
-- next part --
An HTML attachment was scrubbed...
URL:
http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20121012/d35f9924/attachment.html
You are right, there are couple of registers in
Wolfson DACs, accessed via some sort of specific
serial interface. The frontend -- as the Genesys
GL* datasheets understand the word. Never mind.
My scanner is indeed ST28 with USB IDs 0x7B3
0x802. So yours would be, too.
Your hardware list fits
merc1984 at f-m.fm writes:
I want the daemon (in network mode) to only -bind- to 127.0.0.1 .
Not any other IP.
And listen or bind are variously the correct directives, depending
on the daemon.
To which I replied:
There's no documented way of doing this. You could check the code but
I
