I have got a scanner Epson Perfection Photo V100 (which need the
proprietary driver Epowka). I have installed it and it works only with
root: xsane don't find the scanner when launched with the classical
users accounts (tested with two).
I have found that the scanner is not included in
Hello,
Pierre Willenbrock a ?crit :
Guillaume Gastebois schrieb:
Hello,
It's a little bit better with these values.
In Genesys_Sensor I have :
regs_0x08_0x0b : {0x00, 0x21, 0x00, 0x00}
regs_0x10_0x1d : {0x02, 0x8b, 0x02, 0x8b, 0x02, 0x8b, 0x20, 0x06, 0x00,
0xff, 0x24, 0x00, 0x00, 0x04}
thanks. its already listed in our description files, so it should get
a udev rule with the next release of sane.
allan
On 2/6/08, Stephane Blondon stephane.blondon at gmail.com wrote:
I have got a scanner Epson Perfection Photo V100 (which need the
proprietary driver Epowka). I have installed
Guillaume Gastebois schrieb:
Hello,
Pierre Willenbrock a ?crit :
Guillaume Gastebois schrieb:
Hello,
It's a little bit better with these values.
In Genesys_Sensor I have :
regs_0x08_0x0b : {0x00, 0x21, 0x00, 0x00}
regs_0x10_0x1d : {0x02, 0x8b, 0x02, 0x8b, 0x02, 0x8b, 0x20, 0x06, 0x00,
i personally have not used one, and they are quite expensive, but i
understand that the Epson Perfection v700 or v750 are quite fast, and
are reported to work with SANE.
allan
On 2/5/08, Alex Bernier alex.bernier at free.fr wrote:
Hello,
I don't know if it is the right place for this
Stefan Lucke schrieb:
Hi,
I guess there are 3 possibilities for infinite loops.
Attached patch fixes this and adjusts loop threshold
to given comments..
Thanks for spotting these.
We have never had a problem with those loops, but it is certainly a good
idea to have the code working as the
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Bonsoir,
I have an epson usb scanner and it become recently very slow to use:
sane rset the usb device everytime I want to use it; message in log file
is this one:
usb 5-3: reset high speed USB device using ehci_hcd and address 10
lsusb gives:
are you using Fedora 7 or 8 by chance?
allan
On 2/6/08, Fran?ois Patte francois.patte at math-info.univ-paris5.fr wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Bonsoir,
I have an epson usb scanner and it become recently very slow to use:
sane rset the usb device everytime I want to
Hello list,
I have the HP Laserjet M1120n (network version of M1120) and it works
with the hplm1005 backend over usb
Vendor ID: 0x0370 (of course, HP)
Product-ID: 0x5717
got sane from CVS today (feb 7 2008)
modified backend/hpljm1005.c to include USB id:
/* Zero-terminated USB VID/PID array
Hi,
Avision has special book scanners, that have a zero edge / book edge
feature, which mean one side of the scanner is specially formed to press
a book on:
http://www.proscan.com.au/avision/FB6080E.htm
and are supported by my Avision backend.
Yours,
Ren?
On Wednesday 06 February 2008
===
== Neuer Eintrag
===
---
-- Formular: 'adddev'
---
1. Your email address:
'mssa at yahoo.com'
2. Manufacturer (e.g.
Guillaume Gastebois schrieb:
Hello,
I need a little bit more informations befor testing (sorry for my poor
knowledge
in scanner)
Selon Pierre Willenbrock pierre at pirsoft.dnsalias.org:
I don't know why the image colors are reversed, but it may be worth
trying to flip the sign bits
Excuse me if this is a repost, but I didn't see my own mail, back on the list...
-- Forwarded message --
From: Hans Voss hans.v...@gmail.com
Date: Feb 7, 2008 12:07 PM
Subject: Working: HP Laserjet M1120(n) using hpljm1005 backend
To: sane-devel at lists.alioth.debian.org
Hello
that is because you are using gmail. it does not put things in your
inbox until there is a response.
allan
On Feb 7, 2008 2:29 PM, Hans Voss hans.voss at gmail.com wrote:
Excuse me if this is a repost, but I didn't see my own mail, back on the
list...
-- Forwarded message
thanks- i will add this now with one change- you misspelled David
Packard's last name :)
allan
On 2/7/08, Hans Voss hans.voss at gmail.com wrote:
Hello list,
I have the HP Laserjet M1120n (network version of M1120) and it works
with the hplm1005 backend over usb
Vendor ID: 0x0370 (of
===
== Neuer Eintrag
===
---
-- Formular: 'adddev'
---
1. Your email address:
'david.hince at yahoo.ca'
2. Manufacturer
Hello,
I just bought a Canon Pixma MP470 printer+scanner device and I cannot get it to
work with sane. The printer part seems to work with the MP150 driver.
I can pitch in with some usb scan info, if some one tells me where to find the
docs.
-ashwin
Dear All,
we want to change GT68xx backend in a way that it will work with ScanExpress
A3 USB scanner better than before, who can help us that from where we should
start?
I don't know why GT68xx backend work with some devices good but it has a
basic functionality for ScanExpress A3 USB.
Thanks
On Friday 08 February 2008, Reinhard Biegel wrote:
Am Wednesday, 6. February 2008 schrieb Reinhard Biegel:
Ohi just remember there was something that had to be called at any
price but didn't find any documentation about that. I'm going to look for
that in my logs.
Hi again,
I
Hello,
Why calibration is so long (~50/60s) ?
What are /* Start of white strip in mm (y) */ and /* Start of black mark
in mm (x) */ in genesys_devices.c ?
Regarding the log file you said :
W ! 0x23 ! 0x050 ! dac value rgb(offset value)
W ! 0x2b ! 0x028 ! pga gain rgb
But on debug, I see that
Hi Guillaume,
Guillaume Gastebois schrieb:
Hello,
Why calibration is so long (~50/60s) ?
It is probably failing. Should take about 3-5 seconds. Look at the logs,
the calculated averages and calibration are dumped there.
What are /* Start of white strip in mm (y) */ and /* Start of black
===
== Neuer Eintrag
===
---
-- Formular: 'adddev'
---
1. Your email address:
'karl-heinzbaumbach at arcor.de'
2.
Hi guys,
I gess I have an answer of my question ;)
I just bought a Canon LiDE 90 and can't make it work ... I will try to
make a backend, but I wanted to be sure that nobody was doing it ...
Is there anybody working on it ?
Do you think I could help for anything ? Can I download anywhere
I have a Sun Ultra 2 running Solaris 8 in 64-bit mode.
My scanner is a Microtek Scanmaker E3 with a SCSI
Interface
I have the Scanner connected to a second SCSI card
(sbus).
(Not the built-in one)
When I run probe-scsi-all,
ok probe-scsi-all
Target 4scanner/sbus at 1f,0/dma at
Hello,
I have a Sun Ultra 2 running Solaris 8 in 64-bit mode.
My scanner is a Microtek Scanmaker E3 with a SCSI
Interface
I have the Scanner connected to a second SCSI card
(sbus).
(Not the built-in one)
When I run probe-scsi-all,
ok probe-scsi-all
Target 4scanner
/sbus at
Hello,
I'm about ready to try and use USB snooping under windows to get
information abut my MP710 (740 is same except adds fax capability).
Nicholas, sinceyou so kindly offered to add the IDs for the MP470,
could you add the following to your driver as well so I can try it
out?
found USB scanner
Hi!
I'm trying to write the backend for Canon LiDE 600F and now I'm stuck
with sanei_usb_read_bulk. I tried 10 hours but I don't understand how to
get sanei_usb working with bulk_read. Can somebody help me out?
Here are some details:
Canon LiDE 600F is similar to Canon LiDE 70. I checked this
Oops.
The bulk read and write should have been written this way:
status = sanei_usb_write_bulk (0, setup_buffer, count);
...
status = sanei_usb_write_bulk (1, setup_buffer, count);
...
status = sanei_usb_read_bulk (1, data, count);
First endpoint 0 then 2 times endpoint 1.
--
I have spent hours trying to get this scanner to work with Ubuntu.
Can anyone please help me?
Thanks!
,-._,-.
\/)(\/
(:o:)
(!)
That scanner is not supported by SANE. A backend could be written by
an appropriately motivated programmer, generally with access to the
hardware, and a bit of time.
allan
On 2/9/08, rogerdavis at earthlink.net rogerdavis at earthlink.net wrote:
I have spent hours trying to get this scanner to
Hello,
I assume that there is a problem with the communication with that
scanner. The backend tries to identify the scanner by inquiring various
settings. And if the backend does not get the expected answers from it
(Escape-sequences with defined arguments) it will not make use of that
scanner. I
Hi,
MP710 which is similar to MP740, look to be from the same generation as
MP730 ?
It could be worth trying to use current MP730 Sane driver on your MP710, and
see how it goes ?
In that case, I can easily produce a test driver version for MP710 to use
MP730 driver, that you could try.
Gernot
Bill,
I just tried the ScanJet 4100 C with an OpenSuse 10.3 on a 64 Bit
machine without problems. On Suse 10.1 32 Bit the scanner was not
detected by the USB-layer because of error messages like
Feb 10 11:08:26 capella kernel: usb 1-9: new full speed USB device using
ohci_hcd and address 14
Feb
Hello,
Pierre Willenbrock a ?crit :
Hi Guillaume,
Guillaume Gastebois schrieb:
Hello,
Why calibration is so long (~50/60s) ?
It is probably failing. Should take about 3-5 seconds. Look at the logs,
the calculated averages and calibration are dumped there.
What are /* Start of white
Hello,
I forget in my last mail (I'm hill today. It's not good for
concentration...) : You can find a scanimage log on :
http://ggastebois.free.fr/lide90_snoop/scanimage.log.
Regards
Guillaume
Pierre Willenbrock a ?crit :
Hi Guillaume,
Guillaume Gastebois schrieb:
Hello,
Why
Hello,
You can find my modified files for LiDE90 on :
http://ggastebois.free.fr/lide90_snoop/sources/
With them you will bee able to scan images (very poor quality) in
reversed video (???) and with a calibration during 60s (!!!)
Regards
Guillaume
sane at tsleg.com a ?crit :
Hi guys,
I
Could you try the following Pixma package. Download it from sendspace.com at
the following link:
http://www.sendspace.com/file/ogro4h http://www.sendspace.com/file/ogro4h
And use instructions given on this blog to install and test it:
On Feb 10, 2008 10:28 PM, nicols nicolas.martin at freesurf.fr wrote:
Could you try the following Pixma package. Download it from sendspace.com at
the following link:
http://www.sendspace.com/file/ogro4h http://www.sendspace.com/file/ogro4h
Hello and thanks. Whew, I had just downloaded the
On Feb 10, 2008 11:24 PM, Gernot Hassenpflug aikishugyo at gmail.com wrote:
Now I will try to integrate the driver into xsane, and also see how it
does with scanning larger areas up to A4.
Good news, using xsane I could scan an L-size photo and an A4 page in
full colour at 300dpi. anything
On Saturday 09 February 2008 18:59:47 sane at tsleg.com wrote:
Hi all,
I just bought a Canon LiDE 90 and can't make it work ... I will try to
make a backend, but I wanted to be sure that nobody was doing it ...
Is there anybody working on it ?
Yes, just look into the archive, e.g. even
Julien BLACHE jb at jblache.org wrote:
Especially, SSH has been disabled until a patched kernel can be
installed on the machine with a fix for the vmsplice local root
exploit that affects kernels 2.6.17 to 2.6.24.1.
And this has now happened, so SSH is available again.
JB.
--
Julien BLACHE
===
== Neuer Eintrag
===
---
-- Formular: 'adddev'
---
1. Your email address:
'mikeallex at gmail.com'
2. Manufacturer (e.g.
Ok, great!
In order to debug the 600 and 1200 dpi, I will need the traces produces
by the driver in debug mode.
For that:
- Recompile the driver with debug information:
$ make distclean
$ make
- Set the Sane debug variable to full debug mode , and run xsane from
the same console, to get the
Bill,
in case of the failure no data was received from the scanner. The
backend then retries to read the requested data again after waiting 0.1
seconds. You can try to increase the number of retries to see if this helps:
export SANE_HP_RDREDO=20
xsane hp
This will do 20 retries (2 seconds in
Hi!
I managed to solve the problem.
Here it is:
Canon driver sends a dummy bulk write as shown in the log. It only
produces errors and I think it's only for delaying bulk reads. We can
omit that and use a fix delay of 1 ms instead.
Sanei_USB sets the right endpoints. I can read and write data on
here is the code:
Bus 005 Device 002: ID 04a9:1723 Canon, Inc.
let me know when the driver is ready. will be better if you can put out a
patch, so i can do it via apt-get source.
thanks!
-Ashwin
- Original Message
From: Nicolas nicolas.mar...@freesurf.fr
To: sane-devel at
A test driver for MP470 is ready, you can download it at the following
link:
http://www.sendspace.com/file/ogro4h
Use instructions given on this blog to install and test it:
http://mp610.blogspot.com/2007/11/new-sane-scanner-driver-for-canon-mp610.html
Let us know...
Nicolas
Le dimanche 10
What functionality is missing from this driver other than
1- film area guide mode not supported
2- IEEE1394 untested
On Saturday 09 February 2008, Stefan Lucke wrote:
On Friday 08 February 2008, Reinhard Biegel wrote:
Am Wednesday, 6. February 2008 schrieb Reinhard Biegel:
Ohi just remember there was something that had to be called at any
price but didn't find any documentation about that. I'm going
===
== Neuer Eintrag
===
---
-- Formular: 'adddev'
---
1. Your email address:
'mail at test.ws'
2. Manufacturer (e.g.
You are talking about writes like:
I guess YES.
Yes, I do.
Now I found the right one AND the right time: Before doing the reset ;-).
So now I've the initial motor movement with LED blinking and a scan
movement with green LED.
But no (strange) data arrives.
I tried your diff, but I
Hi list,
anybody knows if/where to find $subject on the web? Something that
describes some details of motor control, lamp control and analog/digital
postprocessing, as well as the general scanning operating. Just enough
for a developer of a driver for a dumb chip(like the genesys chips).
If
SANE-Backends 1.0.19 has been released. Changes since SANE 1.0.18:
New backends: cardscan (Corex Cardscan 800c), epjitsu (Epson-based
Fujitsu), epson2 (various Epson scanners), hp3900 (HP ScanJet 3970 and
more), hp5590 (HP ScanJet 5590 and more), hpljm1005 (HP LaserJet M1005
and more), hs2p
My version of man2html does not take any of the arguments given in
doc/Makefile, and so all the html manpages on the sane website are
garbage at the moment. if someone else has a clue about this program,
i could use one. i will dig into it more tomorrow.
allan
--
The truth is an offense, but not
Hello all,
sane-backends-1.0.19.tar.gz.md5 file was expected to be 62 bytes; but
downloads as 87977 bytes
This needs correction. The commands I executed are shown below.
Thanks
Gerald
What the download page at http://alioth.debian.org/frs/?group_id=30186 says
On Monday 11 February 2008, Reinhard Biegel wrote:
You are talking about writes like:
I guess YES.
Yes, I do.
Now I found the right one AND the right time: Before doing the reset ;-).
So now I've the initial motor movement with LED blinking and a scan
movement with green LED.
unable to reproduce. can you try again?
allan
On 2/11/08, Gerald Murray gmurray at cloudnet.com wrote:
Hello all,
sane-backends-1.0.19.tar.gz.md5 file was expected to be 62 bytes; but
downloads as 87977 bytes
This needs correction. The commands I executed are shown below.
Thanks
Gerald
Hi Nicholas,
Good news! It works. I think the only kink was the order of a few things:
1. compile
2. copy
3. sudo ldconfig -- just in case
4. udev hacks + replug device
5. Try everything else (scanimage -L)
If 3 and 4 are interchanged, I get a scanimage: sane_start: Invalid argument
I added this
i would LOVE to see such a doc, but never have. but its not just
flatbeds- cheaper adfs use the same chips...
allan
On 2/10/08, Pierre Willenbrock pierre at pirsoft.dnsalias.org wrote:
Hi list,
anybody knows if/where to find $subject on the web? Something that
describes some details of motor
there are 3 backends which support this machine. the one which lists
these two points is external to sane, so you might want to ask avasys
directly. of the other two, one is unmaintained, and the other is new,
so we may not be able to provide you with an answer.
maybe you can get one and tell us
excellent work. please keep us informed.
allan
On 2/10/08, J?rgen Ernst jrernst at gmx.de wrote:
Hi!
I managed to solve the problem.
Here it is:
Canon driver sends a dummy bulk write as shown in the log. It only
produces errors and I think it's only for delaying bulk reads. We can
omit
I went to the epson-avasys web site and found they provide
these files for this scanner:
iscan-2.10.0-1.c2.i386.rpm
iscan_2.10.0-1.tar.gz
userg_revG_e.pdf
I have not trie their driver yet. Will let you know once I have the scanner.
JD
m. allan noah wrote:
there are 3 backends which support
Am Monday, 11. February 2008 schrieb Stefan Lucke:
...
[genesys_gl841] reg[0x6b] = 0x02
[genesys_gl841] reg[0x6e] = 0x6d
[genesys_gl841] gl841_bulk_write_register: failed while writing command:
Invalid argument
scanimage: open of device genesys:libusb:001:010 failed: Invalid
Reinhard Biegel schrieb:
Am Monday, 11. February 2008 schrieb Stefan Lucke:
...
[genesys_gl841] reg[0x6b] = 0x02
[genesys_gl841] reg[0x6e] = 0x6d
[genesys_gl841] gl841_bulk_write_register: failed while writing command:
Invalid argument
scanimage: open of device
Quoting m. allan noah kitno455 at gmail.com:
unable to reproduce. can you try again?
allan
Hello Allan,
I tried again today, using the http mirror for the United States. It
downloaded as the diff file.
I also check some other mirrors, and 1.0.19 has not been propagated to
them for
can you paste the full url you downloaded from?
allan
On Feb 11, 2008 1:48 PM, Gerald Murray gmurray at cloudnet.com wrote:
Quoting m. allan noah kitno455 at gmail.com:
unable to reproduce. can you try again?
allan
Hello Allan,
I tried again today, using the http mirror for the United
I have made the part of epson2 backend that special for the Perfection 4990
scanner. Every thing should work, but more testing would be nice. I have too
made the part of the epson backend (the old driver) for 4990, but there are a
few thing not working, especial with the transperant unit.
Hi Gernot,
That sounds great news, and we can inform the Sane list then!
I had a look at the debug trace you sent me, and everything looks right,
working as expected.
I'll keep it anyway as a reference, if needed.
Let us know if you are able to reproduce the problem you had before, and
if you
Quoting m. allan noah kitno455 at gmail.com:
can you paste the full url you downloaded from?
allan
I did not keep track of the url page for the first and second. Pastes
are for the file on the page.
(results pasted)
The very first:
On Feb 11, 2008 3:56 PM, gmurray at cloudnet.com wrote:
Quoting m. allan noah kitno455 at gmail.com:
can you paste the full url you downloaded from?
allan
I did not keep track of the url page for the first and second. Pastes
are for the file on the page.
(results pasted)
The very
On Feb 11, 2008 4:08 PM, m. allan noah kitno455 at gmail.com wrote:
On Feb 11, 2008 3:56 PM, gmurray at cloudnet.com wrote:
Quoting m. allan noah kitno455 at gmail.com:
can you paste the full url you downloaded from?
allan
I did not keep track of the url page for the first and
Gernot- does the windows driver allow independent resolution controls?
what are you going to do with the stretched image that will result?
Nicolas- cvs is open for business again, so we can accept your patch
at any time. keep up this level of interaction and you'll get
maintainership too :)
Hi Ashwin!
That's good news too then!
For sure, the libsane rule needed to be adjusted for PID 1723,
corresponding to MP470.
When the Sane driver will be updated with the changes for recent Pixma
MFPs, the libsane
rules will be produced automatically when compiling Sane, provided that
the .desc
Seems to me that the hp-backend can do a workaround, but not worth for
daily use. Could be that the HP ScanJet 4100 C is a little bit
problematic concerning USB in certain environments. BTW, did you try to
connect the scanner directly to an USB-connector on the back of the PC ?
I am giving up
Ok, Allan, thanks for your kind present ;-)
AFAIK, (for MP610 at least), different resolution on x and y axis are
always rejected
by the scanner (tested it already).
The Windows driver (MP610's) always use same x y, and you cannot
specify different
x/y values, only _one_ value can be entered as
On Feb 12, 2008 6:14 AM, m. allan noah kitno455 at gmail.com wrote:
Gernot- does the windows driver allow independent resolution controls?
what are you going to do with the stretched image that will result?
Maybe I misunderstood the issue: the MP710 and others have resolutions
of 1200x2400 (or
Hello,
I modified registers 10-1d with :
{0x04, 0xd3, 0x04, 0xd3, 0x02, 0xa3, 0x20, 0x06, 0x00, 0xff, 0x24, 0x00,
0x00, 0x04},
and now the led is really white (red green and blue by moving eyes).
Led calibration seems to be good.
But calibration is always 60s long.
I need help.
Thanks
Hi,
I've made some progress ...
I changed :
/* CANOLIDE35 */
{1200,
/*TODO: find a good reason for keeping all three following variables*/
87,/*(black) */
87,/* (dummy) */
0,/* (startxoffset) */
10400,/*sensor_pixels */
sane at tsleg.com a ?crit :
Where do I set this ? (which parameter of which struct ?)
Sorry ... I found where to set this.
cgi-mailer at kundenserver.de writes:
2. Manufacturer (e.g. Mustek):
'Epson Stylus DX 4050'
Treat as if it's a DX4000 and all should be well.
The DX4000 is listed in epkowa.desc, status: good.
3. Model name (e.g. ScanExpress 1200UB):
'All in One'
4. Bus type:
'USB'
5. Vendor id
On Monday, 11. February 2008, Pierre Willenbrock wrote:
Did someone post the bcdDevice value of a LiDE 80? GL841 goes up to
3.0.5, as someone said, and GL842 begins with 3.0.6
bcdDevice of mine is 0302.
Reinhard
On Tuesday 12 February 2008 03:41:49 Reinhard Biegel wrote:
On Monday, 11. February 2008, Pierre Willenbrock wrote:
Did someone post the bcdDevice value of a LiDE 80? GL841 goes up to
3.0.5, as someone said, and GL842 begins with 3.0.6
that was me. But it's not quite clear. got also some
Hello,
I inverted colors with gimp. Sorry I forget this operation.
Selon postmaster postmaster at tsleg.com:
Hi,
How did you get this one :
http://ggastebois.free.fr/lide90_snoop/toto_10_0_0_comment.jpg ??
Colors are not inverted ...
Guillaume Gastebois a ?crit :
Hello,
I
Gerhard Jaeger schrieb:
On Tuesday 12 February 2008 03:41:49 Reinhard Biegel wrote:
On Monday, 11. February 2008, Pierre Willenbrock wrote:
Did someone post the bcdDevice value of a LiDE 80? GL841 goes up to
3.0.5, as someone said, and GL842 begins with 3.0.6
that was me. But it's not quite
On Monday 11 February 2008, Pierre Willenbrock wrote:
Reinhard Biegel schrieb:
Am Monday, 11. February 2008 schrieb Stefan Lucke:
At that moment, I guess you'll see messages like:
new high speed USB device using ehci_hcd and address nn
via dmesg.
Hi,
Yes, thats right.
On Tuesday 12 February 2008 10:24:51 Pierre Willenbrock wrote:
Gerhard Jaeger schrieb:
On Tuesday 12 February 2008 03:41:49 Reinhard Biegel wrote:
On Monday, 11. February 2008, Pierre Willenbrock wrote:
Did someone post the bcdDevice value of a LiDE 80? GL841 goes up to
3.0.5, as someone
The Epson 4490 is not listed on
http://www.sane-project.org/sane-mfgs.html#Z-EPSON
Surfing around i see people have asked about support, there are cases where it
does NOT work with out-of-the-box distribs/kooka, but i am not seeing
definitive answers of whether it does or doesn't
Does anyone
===
== Neuer Eintrag
===
---
-- Formular: 'adddev'
---
1. Your email address:
'qpadla at gmail.com'
2. Manufacturer (e.g.
===
== Neuer Eintrag
===
---
-- Formular: 'adddev'
---
1. Your email address:
'rimvydas.lauzikas at kf.vu.lt'
2.
El Tuesday 12 February 2008 18:53:19 cgi-mailer at kundenserver.de escribi?:
===
== Neuer Eintrag
===
---
-- Formular: 'adddev'
On Tuesday 12 February 2008 20:18:03 JKD wrote:
El Tuesday 12 February 2008 18:53:19 cgi-mailer at kundenserver.de escribi?:
===
== Neuer Eintrag
===
---
--
Guillaume Gastebois schrieb:
Hello,
I modified registers 10-1d with :
{0x04, 0xd3, 0x04, 0xd3, 0x02, 0xa3, 0x20, 0x06, 0x00, 0xff, 0x24, 0x00,
0x00, 0x04},
and now the led is really white (red green and blue by moving eyes).
Led calibration seems to be good.
But calibration is
Hello,
I see that reg[2] was like 0x07. So INVOP was still set !!!
I comment out offset_calibration in genesys_flatbed_calibration, set
reg[2] to 0x03, and I get a black image with a gray vertical line in the
middle !!!
I try to reenable offset_calibration and I get :
Guillaume Gastebois schrieb:
Hello,
I see that reg[2] was like 0x07. So INVOP was still set !!!
I comment out offset_calibration in genesys_flatbed_calibration, set
reg[2] to 0x03, and I get a black image with a gray vertical line in the
middle !!!
I try to reenable offset_calibration
Pierre Willenbrock schrieb:
Guillaume Gastebois schrieb:
Hello,
I see that reg[2] was like 0x07. So INVOP was still set !!!
I comment out offset_calibration in genesys_flatbed_calibration, set
reg[2] to 0x03, and I get a black image with a gray vertical line in the
middle !!!
I try to
===
== Neuer Eintrag
===
---
-- Formular: 'adddev'
---
1. Your email address:
'ficmatin01 at solar.com.br'
2. Manufacturer
Hello,
On Feb 12 15:46 m. allan noah wrote (shortened):
why would you want to rebuild the configure script from the tarball?
At least for us (i.e. the Suse distribution) it is recommended
to run autoreconf -fi so that it matches exactly to the tools
in our distribution.
This does not mean that
Pierre Willenbrock schrieb:
Stefan Lucke schrieb:
Hi,
I guess there are 3 possibilities for infinite loops.
Attached patch fixes this and adjusts loop threshold
to given comments..
Thanks for spotting these.
We have never had a problem with those loops, but it is certainly a good
idea
On Feb 13, 2008 9:22 PM, Pierre Willenbrock pierre at pirsoft.dnsalias.org
wrote:
Pierre Willenbrock schrieb:
Stefan Lucke schrieb:
Hi,
I guess there are 3 possibilities for infinite loops.
Attached patch fixes this and adjusts loop threshold
to given comments..
/../
Thanks for
Hello,
OK, I'll try it tonight.
How do I cleanly remove shading_calibration ?
Regards
Guillaume
Selon Pierre Willenbrock pierre at pirsoft.dnsalias.org:
Pierre Willenbrock schrieb:
Guillaume Gastebois schrieb:
Hello,
I see that reg[2] was like 0x07. So INVOP was still set !!!
I
1 - 100 of 30682 matches
Mail list logo