We had followed same link and do setup same already , but still issue is
there
Regards
*Rupinder Singh*
On 15 March 2016 at 01:13, Jorge Schrauwen wrote:
> This was recently verified to still be working:
> https://docu.blackdot.be/snipets/solaris/smartos-nat
>
>
On 3/14/2016 4:44 PM, Humberto Ramirez wrote:
> Hi, is there a quick way to temporarily disconnect a NIC on a VM?
> "Unplug the wire" kind of thing... VMWare has a simple check box to do this.
>
> I could just remove/add the nic to the VM but I'm sure there is a simple
> command that will
Only the _filesystem variants.
If memory serves me right: adding them on creation -> OK
Some of add_filesystems, remove_filesystems or update_filesystems was
broken... I think it was update and remove. I just stopped trying that
all together and recreaste the entire zone of I need to do a
This was recently verified to still be working:
https://docu.blackdot.be/snipets/solaris/smartos-nat
Just make sure to update the nat-rules, gz's vnic ip and address
concistantly.
Regards
Jorge
On 2016-03-14 17:30, Rupinder Singh Chugh wrote:
> We had smartos with single public ip
>
>
Hi Rupinder,
What type of network are you on? Do you know your gateway address, and have
you set it for the host and the VM? You've selected two RFC 1918 addresses,
which are for use on private networks. If you want your host and VM to
reach the internet, they will need to pass through a NAT. If
I usually build form source if I want to try a custom image. The instructions
are pretty clear.
[Fred]: The output dir is like following after a successful building:
bash-4.1$ pwd
/home/fliu/smartos-live/output
-bash-4.1$ ls -la
total 158393
drwxr-xr-x 3 fliu fliu 8 Feb 24 19:45 .
I used vmadm, it works fine for adding but updating/remove is a bit
flaky.
On 2016-03-14 13:42, Fred Liu wrote:
> FROM: Jorge Schrauwen [mailto:sjorge...@blackdot.be]
> SENT: 星期六, 三月 12, 2016 19:37
> TO: smartos-discuss@lists.smartos.org
> CC: 王靖
> SUBJECT: Re: [smartos-discuss] How to mount
vmadm
below is my steps
1、SmartOS already has pool zones(ssd), and I insert the SATA hard disk
zpool create sata_pool c2t3d0
2、test.son
{
"brand": "lx",
"image_uuid": "aae64e42-c88d-11e5-a49d-87f422b1820b",
"alias": "test",
"kernel_version": "3.10.0",
"hostname": "test",
From: Fred Liu [mailto:fred_...@issi.com]
Sent: 星期六, 三月 12, 2016 17:50
To: smartos-discuss@lists.smartos.org; smartos-discuss@lists.smartos.org
Subject: Re: [smartos-discuss] How to mount different zfs volumn to the same lx
branded zone
It seems hardware pass-through is not applicable in
* On 2016-03-13 at 10:38 GMT, Eric wrote:
> On 3/13/2016 4:31 AM, Ian Collins wrote:
>
> > It's better to start a new thread than hijack an exiting one!
>
> Metadata! I changed to a new subject line, but the email client
> pulled something extra that was in the previous thread. Sorry about
>
Hi friends, recently I tried to setup a DSR mode LB via ilbadm in smartos, but
I got some problems and need your help.
1.first I create a Vm with “allow_ip_spoof”: true
2.second I enable the lib service.svcadm enable ipv4-forwarding ilb
3.second I setup a server group, ilbadm create-servergroup
* On 2016-03-14 at 08:50 GMT, Jorge Schrauwen wrote:
> I hit the problem a while ago also, the python package got recompiled but it
> did not get a version bump so pkgin upgrade does not see it.
>
> pkgin -Fy in python27
>
> (the -Fy is imporant) will force reinstall python and fix the problem)
I hit the problem a while ago also, the python package got recompiled
but it did not get a version bump so pkgin upgrade does not see it.
pkgin -Fy in python27
(the -Fy is imporant) will force reinstall python and fix the problem)
Regards
Jorge
On 2016-03-14 08:32, Eric wrote:
Only
Only tested on python 2.7 so far
Upon upgrading openssl-1.0.2e to openssl-1.0.2g SSL related functions in
python breaks
A solution is to remove python27-2.7.11 and re-install it
Removing python2.7 with 'pkgin remove python27-2.7.11' will also remove
nodejs-5.7.0, which will also need to be
14 matches
Mail list logo