Success, of sorts.
First of all - thanks to all who have helped
No zoning on the McData4400 switch. the v490 sees the san - all is good! The
v210 (actually two of them) do not see the SAN in cfgadm. But from the switch,
I can see WWN for everybody physically connected. Conclusion, hw is
Nov 7 15:33:19 v210-1.lab.presidio.corp in.ndpd[574]: [ID 448925 daemon.error]
terminated
Nov 7 15:33:29 v210-1.lab.presidio.corp syslogd: going down on signal 15
Nov 7 15:33:34 v210-1.lab.presidio.corp rpcbind: [ID 564983 daemon.error]
rpcbind terminating on signal.
Nov 7 15:34:04
Has anyone else had trouble getting the hba to configure?
hw - v210
hba qla2460
from the OK prompt - test-all shows the hba
fcinfo hba-port
HBA Port WWN: 21e08b8a7f75
OS Device Name: /dev/cfg/c3
Manufacturer: QLogic Corp.
Model: QLA2460
Firmware Version:
Yeah! I know what it's supposed to look like - my question is: Why, when I
configure the attachment point, it seems that the command is ignored?
here's the McData switch configuration for the port
Port Number:0
Port Name: v210-1
Port Type: F Port
Operating Speed:4 Gb/sec