Hi,
I want to use the GPS module of MTS420CA with MICAz on TinyOS 1.1.15. Is
there existing driver for this module in the community? I wonder if anyone
had previous experience on getting GPS data from MTS420CA and could give me
some help.
Thanks a lot!
Regards,
Qi
Hi, I have installed ubuntu 8.04 and tmote for tinyos 2.0.2.
I type the
command tos-check-env
And in the terminal I see:
Path:
/usr/local/sbin
/usr/local/bin
/usr/sbin
/usr/bin
/sbin
/bin
/usr/games
Classpath:
-- WARNING: CLASSPATH
Hi!
I have a problem with Tmote sky and its radio.
I made a nesC program that receives a fast stream of serial packets and
forwards them to radio. My client app uses Java tools for TinyOS 2. Sometimes,
the MoteIF.send method takes a lot longer than usual to execute: instead of a
few
Hello,I'm emailing you about Flock. I'm now using Flock as my default browser,
and I love what it's done for my whole Web experience. Flock is a social web
browser that uniquely pulls together the people, photos, videos and websites I
care about. Check it out, I think you're really going to
Hi,
I want to measure time that Deluge T2 use for disseminating a new
image.
For this scope I need that motes are time syncronized so I can
measure what I need.
(Once motes are syncronized, BaseStation before
disseminate -d command read current time
and last mote that receiving
image read
Hi everyone,
I want to measure some Deluge's features,
in particular I
want to measure time of rebooting of each motes.
Before the reboot
instruction (NetProg.programImageAndReboot(..))
I save on mote's flash
the value returned from call Timer.getNow().
After mote reboots,
the
first
Hello!
I have to send and receive with the UART extention of my tmote-sky. I have a
functionaly interfate that change the TTL signal
with the RS-232 standard of the pc.
To send data from the tmote there aren't problems.
There are some problems with the receive the packet of byte...
This
Just checking, did BasestationCC2240 get removed from 2.0.1 when updating to
2.0.2? I just installed 2.0.2 and that directory seemed to go away...
Kurt
___
Tinyos-help mailing list
Tinyos-help@Millennium.Berkeley.EDU
hello all
I must mesure the iir light intensitive with my telosb, but there is a problem.
The telosb has two sensor ligth only, TSR (total solar radiation) and PAR
(photosynth-active radiation), but I would tha IR (infra red).
There is a mode to mesure this radiation conjoining properly TSR and
Hello.
I'm a telecommunications engineering degree student from Barcelona (Spain).
I'm working with tinyos-2.x under Linux. I have a question executing the
RssiToSerial application. As you would can know, RssiToSerial shows by console
strings like the following:
Perhaps in a near future more information will be available
4) Maxfor in Corea advertises nodes that support the same software.
Regards,
André
- Original Message -
From: sara k [EMAIL PROTECTED]
To: Tinyos-help@Millennium.Berkeley.EDU
Sent: Thursday, October 18, 2007 8:52
[EMAIL PROTECTED]:telos
[EMAIL PROTECTED]:115200: resynchronising
Sending packet 0
Sending packet 1
Sending packet 2
Sending packet 3
Sending packet 4
Sending packet 5
Sending packet 6
I have a Moteiv Telos (rev A) mote, and I'm running windows XP. And
I've had no problems running the demo
Hi all !
I am using tinyOs 2.0.
When I compile my application, using
[EMAIL PROTECTED]:~/PeriodicReader$ make micaz
I get the following.
mkdir -p build/micaz
compiling PeriodicReaderAppC to a micaz binary
ncc -o build/micaz/main.exe -Os -finline-limit=10 -Wall -Wshadow -Wnesc-all
Hi,
Is there any method in this oscilloscope java application that can retrieve
the number of Motes that are connected? i.e how many sensors are connected in
the network. Thank you.
Regards,
Edmund
-
Real people. Real questions. Real answers.
I want to learn TinyOS, Tossim, nesC very well so that i can change in
thier code and add to it for example a new routing protocol..
I installed it successfully, then i started with studying its
tutorials, documentations and teps from Tinyos site, but i found
difficulty in
Hi~ all?
when I install a TOS application, Bootloader , TOSBoot, will be installed
together.
So, I've installed a simple application 'Blink'.After reset, TOSBoot excution
will count down on Leds.
I guess I found two files(TOSBoot.nc, TOSBootM.nc) about TOSBoot in
tos/lib/Deluge folder.
And
Hi everybody:-
After setting Matlab to connect with tmote, and running Matlab when tmote has
been connected to PC, I have the following error:
groupID = 7D
nameofconnection =
[EMAIL PROTECTED]:tmote
Warning: The value of local variables may have been changed to match
HI~ all?
I've got a question for Deluge.
Deluge let us update our program without touching.
It means that golden image will be transfer to the mote which is will be
updated.
And then golden image will be saved in external memory.
Deluge application update a program using golden image on
Hi all,
I understand that the timer used for acoustic ranging done by VU is somewhat
different from the original implementation. I've used the timer provided by
VU, but I seem to run into problems in obtaining the correct quantity of data
when doing acoustic ranging using micaz motes
should point to
the correct directory for acousting ranging).
Regards,
Azhar
From: [EMAIL PROTECTED]: [EMAIL PROTECTED]: [Tinyos-help] ADC sampling
rateDate: Sun, 7 Oct 2007 06:14:54 +
Hi all,I understand that the timer used for acoustic ranging done by VU is
somewhat different from
Hi~ all??
I had installed tinyos 1.1.15 and I was download deluge 2.0 from CVS server.
I've got a manual for deluge 2.0. I followed as the manual, but I can't format
flash memory.
I did compiled and install FormatFlash applications in TestDeluge folder.
after reset. I just see red LED on and
-family:Verdana;font-size:11px;line-height:15px;'TRtda
href='http://adworks.rediff.com/cgi-bin/AdWorks/click.cgi/www.rediff.com/signature-home.htm/[EMAIL
PROTECTED]/1473272_1466559/1473093/1?PARTNER=3OAS_QUERY=null target=new
'img src
=http://imadworks.rediff.com/cgi-bin/AdWorks/adimage.cgi/1473272_1466559
-
From: Bhavish Aggarwal [EMAIL PROTECTED]
To: tinyos-help@Millennium.Berkeley.EDU
Sent: Thursday, October 04, 2007 3:29 PM
Subject: [Tinyos-help] GIO interrupt on tmote sky
Hi,
I'm trying to use the GIO0 pin as a hardware interrupt. I read about
the mechanism to do this. The archives
Doing tutorial 4 I've tried to run java Listen by typing:
[EMAIL PROTECTED]:/opt/tinyos-2.x/apps/BaseStation$ java
net.tinyos.tools.Listen -comm
serial@/dev/ttyUSB0:telosb
The toscomm JNI library was not found.
Check that your tinyos
Hi,
I have bought the tmote sky sensors. It comes along with this oscilloscope
java application for me to try out with the sensors. How can i use eclipse
program to run this java application? so that it can read the commands like
import net.tinyos.util.*? do i need to set any classpath
This is a multi-part message in MIME format.
I made a custom msp430 based board for my TinyOS projects. To save time I
didn't build in serial/bsl support as I figured that I could do all my
programming via JTAG.
So far, so good until I tried to setup my board for Deluge. FormatFlash works
fine
Hello,
I am new to tinyOS. I am writing a small application which has one
configuration PeriodicReaderAppC.nc and one module PeriodicReaderC.nc.
This application is intended to read periodically sensor data and store its
value in a local variable. While everything works fine, I get this
Hello,
I installed Xubuntos live cd in a virtual machine and I tried to execute the
yamp application (tinyos tutorials lesson 10) but I have these problems, when I
type make telosb it's ok but when I type:
[EMAIL PROTECTED]:/opt/tinyos-2.x/apps/Null# make yamp
mkdir -p build/yamp
?)7/ :N:[EMAIL PROTECTED] 18:5H MIME G|[EMAIL PROTECTED] [EMAIL PROTECTED]
Hello! Everybody.
I am trying to change the baud rate from 57600 to 115200 on MIB600.
However, I cannot operate correctly. I do not know why it is not running.
So, I will write down about my trial for changing
Hi, I am a student at Catania University.
I would like to implement in
TinyOS 2 a mechanism of random routing.
I thought to change the
behavior of the application TestNetwork, through the modification of
the file CtpRoutingEngineP, relatively to
task void updateRouteTask ()
but when I
When I try to compile an application fot TOSSIM I see always the same
errors. I have tested some of the solution proposed in this Forum but
noone solve my problem. My errors are:
$ make micaz sim-cygwin
mkdir -p
build/micaz
placing object files in build/micaz
writing XML schema
to app.xml
Hi,
We try to build the NesDoc of our application, but it's failed.
So we do the command : make micaz docs on the application directory and it
result as follow :
$ make micaz docs
Making documentation for Mote_App on micaz
nesdoc /opt/tinyos-1.x/doc/nesdoc/micaz -topdir=/home/dcg -topdir=/
Hi,
We try to build the NesDoc of our application, but it's failed.
So we do the command : make micaz docs on the application directory and it
result as follow :
$ make micaz docs
Making documentation for Mote_App on micaz
nesdoc /opt/tinyos-1.x/doc/nesdoc/micaz -topdir=/home/dcg -topdir=/
Hey all,I need your help regarding to TelosB motes, I'm using Eclipse plugin,
but I'm unable to program the motes,Can u help me??.. antonio
_
With Windows Live Hotmail, you can personalize your inbox with your favorite
color.
Hi i use tmote and tinyos 1.1 ; i must use ADC to sample a voltage on Capacitor
but i have a problem. In fact i use ADC3 and GND(of ADC) but this pin result
short-circuit when tmote is on. This is a big problem for me because the
capacitor discharge and i can't mesaure the really value. How can
Hi i have a problem. I'm using a tmote sky with tinyos 1.1 and i must sample
the voltage on a external capacitor. I set the ADC3 of the expansion connector
but, when i see the value with the java Listen application, the tmote doesn't
sample anything. The question is: all the channels are the
Hi
i use tinyos 1.1, and i have a question: in SenseToInt there is a part of code
that i don't understand:
void task outputTask() {
uint16_t rCopy;
atomic {
rCopy = reading;
}
call IntOutput.output(rCopy 7);
}
why there is 7??
i try to use the code with the sensor of
I have a problem with Tinyviz in TinyOS 1.1.17.
I set the debug environment variable DBG with the commands:
DBG=usr1
but I dont't see the tab 'Debug massages' actived in the control panel on the
right in Tinyviz. After running Tinyviz I have this message:
Creating TinyViz GUI
SF enabled, 0
Spam detection software, running on the system mail.Millennium.Berkeley.EDU,
has
identified this incoming email as possible spam. The original message
has been attached to this so you can view it (if it isn't spam) or label
similar future email. If you have any questions, see
the administrator
Hi, i am going to the directory opt\tinyos-1.x\tools\src but i didn't
understand well what do i do? can you(Michael Schippling) explain me which is
the procedure to display data?
Thanks
--
Leggi GRATIS le tue mail con il telefonino i-mode
Hi i create an application that send message between 2 tmote Sky using Tinyos
1.1. Now i show datas by the command ..Listen: and i see a string like that:
7e 00 0a 7d 1a 01 00 14 00 01 00 10 00
where the last 2 bytes are the value of data.
I want to know if it is possible to show a string like
Hi i read lesson 6 and i try to use it, but i have a question.
Can i show only one data on Oscilloscope GUI?+
the tutorial use a buffer of 10 data but i want to show only one data at one
time; i change the value of BUFFER_SIZE in OscopeMsg but this action caused
some error when showing data.
Hi I am disperate i read the lesson 8 and i try to install this one on Tmote
Sky but there are some problem in fact my CyGwin window put out a lot of Errors
that yuo can see in the image that i attached.
Can you tell me how i have to modify the code to do that the application works
well on my
Hi, on one Tmote Sky i created an application(in Tinyos) that shows the raw
data acquired from an other Tmote, trasmitted by radio.
Now i show the data by the command ..Listen: and i see a string like that:
7e 00 0a 7d 1a 01 00 14 00 01 00 10 00
where the last 2 bytes are the value of data.
HI, on one Tmote Sky i created an application(in Tinyos) that shows the raw
data acquired from an other Tmote, trasmitted by radio.
Now i show the data by the command ..Listen: and i see a string like that:
7e 00 0a 7d 1a 01 00 14 00 01 00 10 00
where the last 2 bytes are the value of data.
I
Thanks a lot for answer
Hi, ja.lopez.riquelme; i understand it(or i hope) and i want ask you more help
with this code:
in a module i wrote this:
void output Task(){
uint16_t rCopy;
rCopy=reading;
call Intoutput.output(rCopy);
}
event result_t Timer.fired(){
post output Task();
}
/**and in
Dear Nguyen,
- How hard to learn NesC.
First of all, nesC is not at all hard to learn. It is actually intended to
make sensor application programmer's life easy. I suggest you to
skim through the TinyOS tutorial available in the Net
and directly start with Blink application.
- And what is
Hi, i want to know if it is possible to pass the value of a variable between
two differents modules and how i can do it.
Moreover is it possible to create a variable that can be modifided by all
modules of a application and how i can do it?
Thanks
Hi,
Though I don't know the answer to your question, I was just
wondering, how the throughput can be improved by disabling backoffs, do
you have only one node sending data; I mean is there no contention for the
channel ?
Manjunath
On Fri, 20 Apr 2007, Jeong Kwanhee wrote:
Hello all!!
Hi I want to know if it is possible to create two timers that count
simultaniously two differents period.
sorry for bad english
Thanks a lot
--
Passa a Infostrada. ADSL e Telefono senza limiti e senza canone Telecom
Hi i want to know if it is possible to create two differents Timers that count
simultaniously two differents periods.
sorry for bad English
Thanks a lot
--
Passa a Infostrada. ADSL e Telefono senza limiti e senza canone Telecom
Hi, i have a problem. I have to take datas from two different sensors on
Tmote-Sky(Light and Temperature) and send on two differente radio channel to an
other tmote-sky. After the transmission, radio turn off and then restart one
second before the next ADC sampling (I hope!).
I wrote this code
Dear
I am a student of University of Catania,
I would like to make a
program where is possible to change the congestion window of mac
protocol in base of the motes's location.
Because I saw an your
message where you wrote that you have some problem(the same of my).
I
tell you if you solve
Currently tossim only compiles for micaz - but the network configuration
file example (and provided the 15x15 grid text files) are for mica2.
What are the implications for running a micaz simulation against a mica2
radio configuration file?
Many thanks,
Stephen Brown
Department of
Only micaz is supported in simulation (see Tutorial, Lesson 11).
Try:
- make micaz sim
--
Passa a Infostrada. ADSL e Telefono senza limiti e senza canone Telecom
http://click.libero.it/infostrada26gen07
The architecture described in TOSSIM: Accurate and Scalable Simulation of
Entire TinyOS Applications is also valid for Tossim in TinyOS 2.0?
Thanks a lot for any help.
Salvo
--
Passa a Infostrada. ADSL e Telefono senza limiti e senza canone
Following is a configuration file and SamplingC is being used in some
other config. file say C, now, the need is:
In C, is it possible to ask SamplingC to bind its ADC to a
particular PORT. (mean, can I set YYPORTYY value dynamically
in the config. file C)
Thanking
I would like to know if the preinstalled program in mica2 is surge_reliable and if the program Surge-View works with this this mica2 program.
Prueba el Nuevo Correo Terra; Seguro, rpido, fiable.
___
Tinyos-help mailing list
I would like to install the preinstalled program in mica2 (Surge_Reliable). I write:
make mica2 install, ID mib510, com4
but the network doesn´t work and the Surge-View program doesn´t detect any mote. Anyone knows what the problem is?
Thank you very much
Prueba el Nuevo Correo Terra; Seguro,
Hi,
Here is C program in the attachment. And I have used some threads
may you can just comment that part of the code. Make sure you are running
Serial Forwarder.
Hope this helps...
Manjunath
On Thu, 19 Oct 2006, Markus Becker wrote:
On Thu, 19 Oct 2006, prabhu govindaswamy wrote:
Oh!!! Here I am re-attaching the 10KB program...
manjunath
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
#include sys/socket.h
#include netinet/in.h
#include netdb.h
#include stdio.h
#include stdint.h
#include errno.h
#include
!
On Fri, 6 Oct 2006, [EMAIL PROTECTED] wrote:
The following is just a thought, any commnets will be very useful...
As Both WLAN (802.11) and micaz (802.15.4) are CSMA/CA based, how can
there could be collisions between their packets? Does'nt Carrier Sense
Threshold would takecare
Spam detection software, running on the system mail.Millennium.Berkeley.EDU,
has
identified this incoming email as possible spam. The original message
has been attached to this so you can view it (if it isn't spam) or label
similar future email. If you have any questions, see
the administrator
Hi!
Please do yo know how to use the -o function in xlistener? Thank you
Prueba el Nuevo Correo Terra; Seguro, rpido, fiable.
___
Tinyos-help mailing list
Tinyos-help@Millennium.Berkeley.EDU
I have problems with xlisten because I can´t see cooked data. I only can see raw data. Do you know what is the cause of this problem?
Thank you.
Prueba el Nuevo Correo Terra; Seguro, rpido, fiable.
___
Tinyos-help mailing list
I would like to know if you thik if the progran listenraw could be modificated in java for sending for another serial port the sensing information sensed by motes an collected by MIB510. The application is to convert the packets in a pc with a modified program of listen raw and send for a rs232
make pc just compiles your program for your PC's architecture.
I suggest you to go through TOSSIM manual.
Manjunath
On Fri, 8 Sep 2006, preeti k wrote:
Hello there..
i have been trying to install tinyos1.x on fedora core 5 . I need to use
tossim as well. i typed 'make pc ' on the
Good evening,
When I try to use McuSleepC and Tossim I obtain the following compilation error:
/tmp/ccTyOEVj.s: Assembler messages:
/tmp/ccTyOEVj.s:34478: Error: no such instruction: `sleep'
I haven't any problem when I try to compile it for micaz platform, instead.
Have a good night !
bye.
Hello everybody!
I have to connect mib510 to gsm module (which expects characters) so I should know the way of convertsthe mib510 transmissions to characters for sending after to a gsm module via rs232.
Another possibility is convert the binnary stream to characters in my gsm module but I should
For techniqal differences please have a look at
http://www.ece.iisc.ernet.in/network_labs/manjunath/commag.pdf
Regads,
Manjunath
On Wed, 30 Aug 2006, Tan Han Chiang wrote:
Hi all,
did anyone did any comparison between tinyOS and SOS (sensor operating
system)?? What is their main
Hi,
Every time I try to define a topology with six or more nodes using collection
algorithm, TOSSIM gives me a segmentation fault error. I know I'm giving you a
very poor information, but before annoying you with a lot of code, I would like
to know whether it is a known issue or it is only a
I have a question about PhotoC.nc: can I use this component in Micaz motes ?
What kind of values should I expect from the PhotoC sensor ?
I've tried to use it, but the result I obtain is a raw value between 8000 and
1.
___
Dear Friends,
Have problems in using SingleHopMsg interface.
I am able to send messages via SingleHopMsg and also receiving
messages at the other end but payload pointer of Receive.receive is not
pointing to the original data that I had sent. I doubt in the way
requirements for slotted acknowledgments.
BR,
Diego
-Mensaje original-
De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] En nombre de Philip Levis
Enviado el: martes, 08 de agosto de 2006 0:00
Para: [EMAIL PROTECTED]
CC: tinyos-help@millennium.berkeley.edu
Asunto: Re: [Tinyos-help] Re: IEEE
I am developing an application in wich threesensors (MICA2 Crossbow)send the information to a gateway and this gateway (MIB510 Crossbow)via RS232 port to a GSM terminal for sending the information by the mobile network. This is the reason why I want to "see" first how take or save the serial data
On Mon, 7 Aug 2006, Philip Levis wrote:
On Aug 5, 2006, at 4:30 AM, [EMAIL PROTECTED] wrote:
Dear friends,
The paper entitled EVALUATING THE USE OF MOTES AND TINYOS
FOR A MOBILE SENSOR PLATFORM
evaluates 802.15.4 (beaconmode) on a real sensor network of micaz
Dear friends,
The paper entitled EVALUATING THE USE OF MOTES AND TINYOS FOR A MOBILE
SENSOR PLATFORM
evaluates 802.15.4 (beaconmode) on a real sensor network of micaz and
telos motes.
Suprisingly, it says beacon mode can not be supported on
capabilities that
We simulated 802.15.4 based sensor clusters using ns2. (Offcourse not
TinyOS based applications)
Manjunath
On Fri, 21 Jul 2006, Roberto wrote:
Does anyone know if exist a simulator that manage radio models and also
simulates the delays due to the processing (interrupt handling, mac,
What you can get is 10-bit PCM samples and have a look at an
sensing (temperature, light..) application in apps/ directory. All you
need to do is to ask TinyOS ADC component to sample microphone port.
Regards,
Manjunath
On Sat, 15 Jul 2006, antonio gonga wrote:
hello;
I'm
Hi,
Have a look at the following paper:
http://www.ece.iisc.ernet.in/network_labs/manjunath/commag.pdf
Manjunath
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
___
someone mentioned awhile ago about the literal needs to be closer to pool error . Hopefully this will help someone.John.
On 5/18/06, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
I am trying to do some simple work with the imote2s, but I can't seem to get them to program correctly. The applications
ideas?
John Ledbetter[EMAIL PROTECTED]
___
Tinyos-help mailing list
Tinyos-help@Millennium.Berkeley.EDU
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
The best choice is to use TOSSIM, a simulator for TinyOS applications,
please read TOSSIM manual
To debug code on the real motes you may make use of LEDS on the mote...
I hope this hepls you...
Regargds,
Manjunath
On Fri, 14 Apr 2006, Sara B. wrote:
Hi,
I'm using micaz platform and I
Hi, i programmed my TMote to send a byte on usb-serial port when a
Timer signal the Fired Event.
Then i take the serial output BEFORE of
the FTDI chip, to interface my TMote with
another microcontroller
using RS232 protocol, but when i remove my TMote from Usb port, and i
connect it to my
Hi, I would know if exist a way to debug NesC code under Windows.
I had
read about a GDB tool working under Linux Systems.
Anyone know the
way to install that tool under windows with cygwin?
Anyone know others
tools?
I'm using TMote Sky Mote developed by MoteIv.
Thank for any
help.
Hey
I
believe that this question has been made a lot of times in the pastbut I
think its time since someone asked it again
I
desperately want any paper commending on tinyos. About its structure, its architecture
how it uses any component..how any file commits to its work
I
ve
: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
Prabal Dutta
Sent: Tuesday, March 07, 2006 12:38 AM
To: [EMAIL PROTECTED]
Cc: tinyos-help@millennium.berkeley.edu
Subject: Re: [Tinyos-help] calling for papars about tinyos...
Those papers provide a high-level description of TinyOS 2.0
Hi, I'm a student of Palermo's University
I have tiny os 1.1.0
installed on Fedora Core 3, with all the correct versions of tools
installed. toscheck runs perfect without any errors or warnings. I am
trying to compile Blink application supplied with it. make pc runs
without any problems. it
Try to check the .nc code of the Pong application (just search in the
archive), you might find it helpful.
hope this helps
Costa
Messaggio originale
Da: [EMAIL PROTECTED]
Data: 2-dic-2005 2.50 PM
A: tinyos-help@Millennium.Berkeley.EDU
Ogg: [Tinyos-help] Read the
RSSI in the TOS_Msg
to see how to run it
ehmm.. thats what i am working on;-))
of!
many thanks for your answer!
[EMAIL PROTECTED]
-kw
On 11/23/05, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
Hello all...
i am kind of confused... totally confused...
i am intrested in tinyos and nesC. In particular i would
Hey all.. (...again!)
when trying to run the tinyviz script with the
TestTinyViz app i get the following msg
[EMAIL PROTECTED]@spoon
/opt/tinyos-1.x/apps/TestTinyViz$
/opt/tinyos-1.x/tools/java/net/tinyos/sim/tinyviz -run build/pc/main.exe
30java -Dpython.cachedir=/tmp/jython.cache
91 matches
Mail list logo
