try:
make mica2 install.1 mib510,/dev/ttyS0
note that I have used period one .1 not comma one ,1
- Original Message -
From: jurin dan [EMAIL PROTECTED]
To: tinyos-help@Millennium.Berkeley.EDU
Sent: Tuesday, July 25, 2006 1:11 PM
Subject: [Tinyos-help] setting node ID
any chance the slider switch on the side was in the
wrong position? I find I have to have it in theOFF position for
everything to work ok.
In an effort to get consistant results, I
documented the steps I took to get my Mica2 units running
I have been creating an Installation Guide CD-ROM for my fellow students
at our University. After pulling my hair out for weeks, I have been able to
create a reproducable and stable environment for Mica2 motes with
sensorboards.
The guide is useful for anyone that does not know where to
how crickets and robots get along.
http://www.parallax.com/detail.asp?product_id=28015
- Original Message -
From: Sankar Gorthi [EMAIL PROTECTED]
To: Mark Bramwell [EMAIL PROTECTED];
Tinyos-help@millennium.berkeley.edu
Sent: Friday, July 14, 2006 6:04 PM
Subject: Re: [Tinyos-help
I am not sure if this will help you with your
problem but I also had the dot problem. I made the following changes to
make 'that' problem go away...
I am creating an installation guide for my
prof. Here is a section that will help you...
Checking the TOS Installation
toscheck completed
Here is what I do on my WindowsXP machine running cygwin I have the
board plugged into com1:
TinyDB- Compiling and installing TinyDB on each mote
cd /opt/tinyos-1.x/apps/TinyDBApp
make mica2 install.0 mib510,/dev/ttyS0 Compiles custom
version of TinyDB for node0
noted the raw
mic functions in the attributes file)?
Thanks for any info you can provide. If this is a FAQ, I could not find
it... feel free to point me to the appropriate documentation.
MARK BRAMWELL
Senior Systems Analyst - Richard Ivey School of Business
Phone: (519) 661-3714 - Fax