On Mar 6, 2014, at 9:50 AM, Scott Wood scottw...@freescale.com wrote:
On Thu, 2014-03-06 at 09:48 -0600, Kumar Gala wrote:
On Jan 23, 2014, at 6:11 AM, Alexander Graf ag...@suse.de wrote:
On 21.01.2014, at 03:25, Scott Wood scottw...@freescale.com wrote:
On Sun, 2014-01-19 at 16:19
On Mar 6, 2014, at 6:12 AM, Prabhakar Kushwaha prabha...@freescale.com wrote:
LAW_EN is only defined if CONFIG_SYS_CCSRBAR_DEFAULT is not equal to
CONFIG_SYS_CCSRBAR_PHYS. in SPL framework CCSRBAR is not relocated hence
both are same. This cause compilation error.
So LAW_EN define outside
On Jan 23, 2014, at 6:11 AM, Alexander Graf ag...@suse.de wrote:
On 21.01.2014, at 03:25, Scott Wood scottw...@freescale.com wrote:
On Sun, 2014-01-19 at 16:19 +0100, Alexander Graf wrote:
With the qemu-ppce500 machine type we can run the same board with
either an e500v2 or an e500mc
On Mar 5, 2013, at 2:40 PM, Wolfgang Denk wrote:
Dear Xu Lei-B33228,
Please do not top post / full quote. Thanks.
In message
8cb6a38adf9e994697ff8a45e96e0853388...@039-sn1mpn1-004.039d.mgd.msft.net
you wrote:
Thank you and I agree with you. It is a little ugly but because
On Sep 26, 2012, at 9:20 AM, Stefan Roese wrote:
Hi Kumar,
On 09/26/2012 03:36 PM, Kumar Gala wrote:
By calling fdt_chosen(), the chosen node will be updated /
created by the fdt boardsetup command. This is useful for
setting of the kernel commandline via the bootargs
env variable
On Sep 26, 2012, at 4:11 AM, Stefan Roese wrote:
By calling fdt_chosen(), the chosen node will be updated /
created by the fdt boardsetup command. This is useful for
setting of the kernel commandline via the bootargs
env variable.
With this change, the fdt boardsetup can be used to
On Sep 26, 2012, at 7:09 AM, Joakim Tjernlund wrote:
Joakim Tjernlund/Transmode wrote on 2012/08/30 15:12:08:
Hi.
We have a new board which we are suing with U-boot. The CPU is a P2020.
I am having a few minor problems, and I was hoping to get some help.
- Boot Count. We
On Aug 30, 2012, at 2:56 AM, Mark Marshall wrote:
- Timer Interrupts seem to stop. Once U-boot has started the timer
interrupts seem to stop. I have added a test command that prints out
the timestamp variable (from arch/powerpc/lib/interrupts.c). I can
see that when we enter the
On Sep 21, 2012, at 5:34 PM, Anatolij Gustschin wrote:
Hi,
On Wed, 19 Sep 2012 09:47:36 -0500
Kumar Gala ga...@kernel.crashing.org wrote:
The following commit introduced some warnings associated with using
pci_addr_t instead of a proper 32-bit data type.
commit
alignment is wrong.
powerpc: Stack Pointer not properly aligned
Kumar Gala (3):
Add e6500 processor detection
Add IFC offset for DPAA/Corenet platforms
Added new ext fields to IFC
Liu Gang (6):
powerpc/corenet_ds: Update README.srio-boot-corenet
powerpc/corenet_ds: Get
On Sep 21, 2012, at 6:54 AM, Robert Thorhuus wrote:
-Original Message-
From: Tabi Timur-B04825 [mailto:b04...@freescale.com]
Sent: den 21 september 2012 13:37
To: Robert Thorhuus
Cc: Kumar Gala; u-boot@lists.denx.de
Subject: Re: [U-Boot]
arch/powerpc/lib
On Aug 29, 2012, at 7:16 PM, Andrew Sharp wrote:
In a couple of places, unsigned int and pci_config_*_dword were being
used when u16 and _word should be used. Unsigned int was also being
used in a couple of places that should be pci_addr_t.
Signed-off-by: Andrew Sharp andywy...@gmail.com
access functions
On some platforms pci_addr_t is defined as a 64-bit data type so its not
proper to use with pci_{read,write}_config_dword.
Signed-off-by: Kumar Gala ga...@kernel.crashing.org
---
drivers/pci/pci.c |6 +++---
drivers/pci/pci_auto.c |2 +-
2 files changed, 4 insertions
On Aug 15, 2012, at 12:19 PM, Scott Wood wrote:
On 08/15/2012 09:21 AM, Kumar Gala wrote:
On Aug 14, 2012, at 4:45 PM, Scott Wood wrote:
On 08/14/2012 04:31 PM, Kumar Gala wrote:
On Aug 14, 2012, at 3:14 PM, Scott Wood wrote:
These are not supported as individual build targets
On Aug 15, 2012, at 7:53 PM, York Sun wrote:
Before proper environment is setup, we extract hwconfig and put it into a
buffer with size HWCONFIG_BUFFER_SIZE. We need to enlarge the buffer to
accommodate longer string. Since this macro is used in multiple files, we
move it into hwconfig.h.
On Aug 14, 2012, at 11:47 AM, Timur Tabi wrote:
The Freescale P4080DS has a complex multiplexed MDIO bus, where the
muxing varies per SerDes protocol. This is because the protocol
determines in which PCI slot the various SGMII and XGMII interface
cards belong, as well as whether the RGMII
On Aug 14, 2012, at 11:47 AM, Timur Tabi wrote:
The Freescale P4080DS has a complex multiplexed MDIO bus, where the
muxing varies per SerDes protocol. This is because the protocol
determines in which PCI slot the various SGMII and XGMII interface
cards belong, as well as whether the RGMII
On Aug 14, 2012, at 4:45 PM, Scott Wood wrote:
On 08/14/2012 04:31 PM, Kumar Gala wrote:
On Aug 14, 2012, at 3:14 PM, Scott Wood wrote:
These are not supported as individual build targets, but instead
are supported by another target.
The dead p4040 defines in particular had bitrotted
On Aug 10, 2012, at 4:17 PM, Wolfgang Denk wrote:
Dear daniel.schwierz...@gmail.com,
In message 1342741198-9105-1-git-send-email-daniel.schwierz...@gmail.com
you wrote:
From: Daniel Schwierzeck daniel.schwierz...@gmail.com
Signed-off-by: Daniel Schwierzeck daniel.schwierz...@gmail.com
On Aug 10, 2012, at 4:46 PM, Wolfgang Denk wrote:
Dear Horst Kronstorfer,
In message 1342097912-8652-1-git-send-email-hkron...@frequentis.com you
wrote:
Make sure that $(LDSCRIPT) is not empty before calling process_lds
with 'cat $(LDSCRIPT)' else cat will block waiting for input from
-by: Kumar Gala ga...@kernel.crashing.org
- k
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
On Aug 14, 2012, at 3:14 PM, Scott Wood wrote:
These are not supported as individual build targets, but instead
are supported by another target.
The dead p4040 defines in particular had bitrotted significantly.
Signed-off-by: Scott Wood scottw...@freescale.com
---
On Aug 14, 2012, at 8:52 AM, Kumar Gala wrote:
On Aug 10, 2012, at 4:17 PM, Wolfgang Denk wrote:
Dear daniel.schwierz...@gmail.com,
In message 1342741198-9105-1-git-send-email-daniel.schwierz...@gmail.com
you wrote:
From: Daniel Schwierzeck daniel.schwierz...@gmail.com
Signed-off
On Aug 14, 2012, at 8:42 AM, Kumar Gala wrote:
On Aug 10, 2012, at 4:46 PM, Wolfgang Denk wrote:
Dear Horst Kronstorfer,
In message 1342097912-8652-1-git-send-email-hkron...@frequentis.com you
wrote:
Make sure that $(LDSCRIPT) is not empty before calling process_lds
with 'cat
On Feb 29, 2012, at 12:17 AM, Govindraj wrote:
On Wed, Feb 29, 2012 at 4:47 AM, Kumar Gala ga...@kernel.crashing.org wrote:
Does anyone have usb ethernet working on top of git tree on a panda board?
yes.
If so any gotcha's or details on how you have it working.
I use following
Does anyone have usb ethernet working on top of git tree on a panda board?
If so any gotcha's or details on how you have it working.
thanks
- k
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
On Jan 13, 2012, at 10:24 AM, Paul Gortmaker wrote:
Hi Kumar,
Was there a problem with my add printout of LCRR patch:
http://patchwork.ozlabs.org/patch/131707/
or did it just get lost over the usual holiday period chaos?
Thanks for merging the others, as they were the more
variable for
user convenience. (EG: run restore_eeprom saveenv)
Signed-off-by: Kyle Moffett kyle.d.moff...@boeing.com
Cc: Andy Fleming aflem...@gmail.com
Cc: Kumar Gala kumar.g...@freescale.com
---
include/configs/HWW1U1A.h | 29 +++--
1 files changed, 27
, fix an incorrect address for the kernel in FLASH memory.
Signed-off-by: Kyle Moffett kyle.d.moff...@boeing.com
Cc: Andy Fleming aflem...@gmail.com
Cc: Kumar Gala kumar.g...@freescale.com
---
include/configs/HWW1U1A.h |7 +--
1 files changed, 5 insertions(+), 2 deletions(-)
applied
On Dec 30, 2011, at 10:53 PM, Paul Gortmaker wrote:
This updates the sbc8548 board support with several improvements
for the end users.
-ability to use SPD DDR config for easy RAM upgrades
-ability to use alternate SODIMM flash for backup u-boot image
-localbus config settings fixed
On Dec 15, 2011, at 9:22 AM, Paul Gortmaker wrote:
It can be handy to have these in the output when trying to
debug odd behaviour.
Signed-off-by: Paul Gortmaker paul.gortma...@windriver.com
applied to 85xx
- k
___
U-Boot mailing list
On Jan 10, 2012, at 5:42 AM, Liu Gang wrote:
+ u32 didcar; /* 0xc - Device Identity CAR */
Drop the '0xc' prefix in the comment, same comment for all registers.
- k
___
U-Boot mailing list
U-Boot@lists.denx.de
Signed-off-by: Kumar Gala ga...@kernel.crashing.org
---
post/Makefile |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/post/Makefile b/post/Makefile
index 200e2f1..55b7d21 100644
--- a/post/Makefile
+++ b/post/Makefile
@@ -32,7 +32,7 @@ COBJS-$(CONFIG_POST_STD_LIST
The following changes since commit 9a4209869bd2c37affd931d627b3c3e72952:
Rob Herring (1):
ARM: highbank: enable networking and pxe
are available in the git repository at:
git://git.denx.de/u-boot-mpc85xx.git master
Kyle Moffett (2):
eXMeritus HWW-1U-1A: Minor environment
On Jan 11, 2012, at 6:47 AM, Fabio Estevam wrote:
CONFIG_NET_MULTI is not used anymore, so remove it from board files.
Cc: Marek Vasut marek.va...@gmail.com
Cc: Stefano Babic sba...@denx.de
Cc: Kumar Gala kumar.g...@freescale.com
Cc: Sandeep Paulraj s-paul...@ti.com
Signed-off-by: Fabio
On Dec 20, 2011, at 10:33 AM, Fabio Estevam wrote:
Since commit 97039ab98 (env_mmc: Allow board code to override the environment
address)
mmc_get_env_addr is a weak-aliased function in common/env_mmc.c
The mmc_get_env_addr implementation that exists at
board/freescale/common/sdhc_boot.c
On Dec 16, 2011, at 3:42 AM, Stefano Babic wrote:
On 16/12/2011 10:33, Fabio Estevam wrote:
The weak function was introduced by this commit:
http://git.denx.de/?p=u-boot.git;a=commitdiff;h=97039ab98c551c7860bc0977d684ef686159e0d7
which breaks non CONFIG_FSL_ESDHC users.
Ok, I see -
On Dec 14, 2011, at 4:34 PM, Timur Tabi wrote:
On some Freescale reference boards for SOCs with Fman devices, the Fman
microcode is located at address 0xEF00 in NOR flash. Unfortunately,
this address is in the middle of nowhere and makes it difficult to
partition flash space for other
On Dec 15, 2011, at 2:09 PM, Timur Tabi wrote:
Kumar Gala wrote:
I see no reason for this patch, if you're flashing a new u-boot flash
the microcode to the new address as well.
This is useful for people who have not moved the microcode. Are we going to
ensure that everyone who
, we dealt with this in the past
commit ce82ff05388b5ddafdf6082ef0776cce72c40b1c
Author: Yuri Tikhonov y...@emcraft.com
Date: Sat Dec 20 14:54:21 2008 +0300
FPU POST: fix warnings when building with 2.18 binutils
Also:
commit e009cdeb63308f291c54b173484401aab4a3fe54
Author: Kumar Gala ga
The following changes since commit c4eba6ec5c58083b38340724c006294c7a4fe2eb:
common/usb_kbd.c: fix bug introduced in commit 00b7d6e (2011-12-09 12:09:35
+0100)
are available in the git repository at:
git://git.denx.de/u-boot-mpc85xx.git master
Kyle Moffett (1):
mpc85xx: Add board
-certified DIMMs
* CPU reset is a little quirky due to hardware misfeature. Proper
support for the hardware reset mechanism has been left for a later
patch series to address.
Signed-off-by: Kyle Moffett kyle.d.moff...@boeing.com
Cc: Andy Fleming aflem...@gmail.com
Cc: Kumar Gala
On Dec 1, 2011, at 7:38 PM, Shaohui Xie wrote:
Description of SerDes clock Bank2 setting in p2041 hardware specification
is wrong, the clock map which based on it is wrong either, so fix the
serdes clock map.
wrong setting of SERDES Reference Clocks Bank2:
SW2[5:6] = ON OFF =100MHz
On Nov 21, 2011, at 5:40 PM, Andy Fleming wrote:
The MAKEALL script cleverly runs make with the appropriate options
to use all of the cores on the system, but your average U-Boot build
can't make much use of more than a few cores. If you happen to have
a many-core server, your builds will
and device tree up for. Thus we need to ensure
we've flushed the regions of memory utilized by ramdisk and device tree
so the loadding and any modifications (from decompression or fdt updates)
are made visible to the secondary cores.
Signed-off-by: Kumar Gala ga...@kernel.crashing.org
---
arch/powerpc
On Dec 7, 2011, at 10:17 AM, Tabi Timur-B04825 wrote:
On Wed, Dec 7, 2011 at 8:42 AM, Kumar Gala ga...@kernel.crashing.org wrote:
+ if (flag BOOTM_STATE_OS_PREP) {
+ boot_prep_linux(images);
return 0;
+ }
if (flag BOOTM_STATE_OS_GO
-declaration]
Signed-off-by: Simon Glass s...@chromium.org
---
lib/qsort.c |1 +
1 files changed, 1 insertions(+), 0 deletions(-)
Acked-by: Kumar Gala ga...@kernel.crashing.org
---
w/o this we actually have compile failure with the tree:
In file included from qsort.c:19:0:
/local/home/galak/git
On Dec 6, 2011, at 1:53 PM, Wolfgang Denk wrote:
Dear Mike Partington,
In message 1288211469-32443-1-git-send-email-mpart...@lexmark.com you wrote:
Modify exports.h to remove its dependencies on other files, thus
enabling standalone apps to require only exports.h from the U-Boot
source
The following changes since commit ea45cb0adcf4baa8f939fea4c848f3e1906f19d9:
net: Make sure IPaddr_t is 32 bits in size (2011-12-06 22:15:32 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-mpc85xx.git master
Shaohui Xie (1):
p2041rdb: fix serdes clock map
Would be nice if the commit message explained why you're adding this feature.
- k
On Dec 3, 2011, at 1:32 AM, Marek Vasut wrote:
Signed-off-by: Marek Vasut marek.va...@gmail.com
Cc: Wolfgang Denk w...@denx.de
---
MAKEALL | 15 +--
1 files changed, 13 insertions(+), 2
On Nov 30, 2011, at 2:17 AM, Wolfgang Denk wrote:
Fix:
cpu.c: In function 'checkcpu':
cpu.c:51:7: warning: variable 'ver' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Wolfgang Denk w...@denx.de
Cc: Kumar Gala ga...@kernel.crashing.org
---
total: 0 errors, 0 warnings, 21
On Nov 30, 2011, at 2:17 AM, Wolfgang Denk wrote:
Fix:
mpc8610hpcd.c: In function 'pci_init_board':
mpc8610hpcd.c:238:15: warning: variable 'pordevsr' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Wolfgang Denk w...@denx.de
Cc: Kumar Gala ga...@kernel.crashing.org
On Nov 15, 2011, at 1:04 AM, Jia Hongtao wrote:
Make the fixup matchable with dts and kernel.
Update the compatible from fsl,flexcan-v1.0 to fsl,p1010-flexcan and
Change the clock-freq property to clock-frequency.
We also change flexcan frequency from CCB-clock to CCB-clock/2 according
to
On Nov 20, 2011, at 12:01 PM, York Sun wrote:
Erratum A-003474: Internal DDR calibration circuit is not supported
Impact:
Experience shows no significant benefit to device operation with
auto-calibration enabled versus it disabled. To ensure consistent timing
results, Freescale recommends
On Nov 22, 2011, at 9:21 AM, Timur Tabi wrote:
Several macros are used to identify and locate the microcode binary image
that U-boot needs to upload to the QE or Fman. Both the QE and the Fman
use the QE Firmware binary format to package their respective microcode data,
which is why the
On Nov 21, 2011, at 5:10 PM, Timur Tabi wrote:
Macro CONFIG_FSL_SATA_V2 is defined if the SOC has a V2 Freescale SATA
controller, so it should be defined in config_mpc85xx.h instead of the various
board header files. So now CONFIG_FSL_SATA_V2 is always defined on the P1013,
P1022, P2041,
On Nov 21, 2011, at 5:10 PM, Timur Tabi wrote:
On the P1022/P1013, the work-around for erratum SATA_A001 was implemented
only if U-Boot initializes SATA, but SATA is not initialized by default. So
move the work-around to the CPU initialization function, so that it's always
executed on the
-AB) on board
I2C: Four I2C controllers
UART: Supports two dUARTs up to 115200 bps for console
RapidIO: Two RapidIO, sRIO1 and sRIO2
Signed-off-by: Shengzhou Liu shengzhou@freescale.com
Signed-off-by: York Sun york...@freescale.com
Signed-off-by: Kumar Gala ga...@kernel.crashing.org
On Nov 21, 2011, at 3:20 PM, Ira W. Snyder wrote:
Newer JEDEC DDR3 SPD Specifications define several additional values for
the DDR3 module_type field which were undefined when this code was
written. Update the code to handle the newer module types.
Signed-off-by: Ira W. Snyder
On Nov 21, 2011, at 3:20 PM, Ira W. Snyder wrote:
This is useful for boards which cannot be reset in the usual way for the
85xx CPU. An example is a board which can only be reset by a hardware
watchdog.
Signed-off-by: Ira W. Snyder i...@ovro.caltech.edu
---
Unchanged from v1.
On Nov 16, 2011, at 1:28 PM, Timur Tabi wrote:
The localbus controller node in the device tree is typically a root node,
even though the controller is part of CCSR. If we were to put the lbc
node under the SOC node, then the 'ranges' property in the lbc node would
translate through the
On Nov 23, 2011, at 10:25 AM, Ira W. Snyder wrote:
This adds support for the Freescale COM Express P2020 board. This board
is similar to the P1_P2_RDB, but has some extra (as well as missing)
peripherals.
Unlike all other mpc85xx boards, it uses a watchdog timeout to reset.
Using the
module_type values from JEDEC DDR3 SPD Specification
mpc85xx: support board-specific reset function
mpc85xx: support for Freescale COM Express P2020
Jia Hongtao (1):
powerpc/85xx: fixup flexcan device tree clock-frequency
Kumar Gala (2):
powerpc/85xx: Add workaround for erratum
On Nov 24, 2011, at 11:14 AM, Marek Vasut wrote:
Fix:
x86emu/ops2.c: In function 'x86emuOp2_set_byte':
x86emu/ops2.c:171:11: warning: variable 'name' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Kumar Gala ga...@kernel.crashing.org
---
drivers/bios_emulator/x86emu/ops2
On Nov 21, 2011, at 3:20 PM, Ira W. Snyder wrote:
This adds support for the Freescale COM Express P2020 board. This board
is similar to the P1_P2_RDB, but has some extra (as well as missing)
peripherals.
Unlike all other mpc85xx boards, it uses a watchdog timeout to reset.
Using the
Fix:
interactive.c: In function 'fsl_ddr_interactive':
interactive.c:1357:15: warning: variable 'len' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Kumar Gala ga...@kernel.crashing.org
---
arch/powerpc/cpu/mpc8xxx/ddr/interactive.c |3 +--
1 files changed, 1 insertions(+), 2
Fix:
x86emu/ops2.c: In function 'x86emuOp2_set_byte':
x86emu/ops2.c:171:11: warning: variable 'name' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Kumar Gala ga...@kernel.crashing.org
---
drivers/bios_emulator/x86emu/ops2.c |3 ++-
1 files changed, 2 insertions(+), 1
cmd_nvedit.c: In function 'do_env_grep':
cmd_nvedit.c:182:3: warning: suggest parentheses around assignment used as
truth value
Signed-off-by: Kumar Gala ga...@kernel.crashing.org
---
common/cmd_nvedit.c |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/common
On Nov 8, 2011, at 5:40 PM, Timur Tabi wrote:
Several macros are used to identify and locate the microcode binary image
that U-boot needs to upload to the QE or Fman. Both the QE and the Fman
use the QE Firmware binary format to package their respective microcode data,
which is why the same
On Nov 20, 2011, at 12:11 AM, Simon Glass wrote:
Hi Kumar,
On Tue, Nov 8, 2011 at 5:48 AM, Kumar Gala ga...@kernel.crashing.org wrote:
On Nov 3, 2011, at 11:22 AM, Simon Glass wrote:
Hi Andy,
On Thu, Nov 3, 2011 at 12:28 AM, Andy Fleming aflem...@freescale.com
wrote:
The MAKEALL
If you look at current board/freescale/p1_p2_rdb/law.c it doesn't have PCI
LAWs anymore. I think for your example you just need an empty data
structure:
struct law_entry law_table[] = {
};
this should hopefully make num_law_entries = 0;
+};
+
+int num_law_entries =
On Nov 8, 2011, at 5:40 PM, Timur Tabi wrote:
Several macros are used to identify and locate the microcode binary image
that U-boot needs to upload to the QE or Fman. Both the QE and the Fman
use the QE Firmware binary format to package their respective microcode data,
which is why the same
On Nov 17, 2011, at 6:40 AM, Stefano Babic wrote:
On 11/16/2011 10:35 PM, Wolfgang Denk wrote:
Dear Kumar Gala,
In message d75ba016-4e89-4cea-acec-cc322ff58...@kernel.crashing.org you
wrote:
Please let's try if this works. If you have any suggestions how to
help better, please
On Nov 16, 2011, at 3:35 PM, Wolfgang Denk wrote:
Dear Kumar Gala,
In message d75ba016-4e89-4cea-acec-cc322ff58...@kernel.crashing.org you
wrote:
Please let's try if this works. If you have any suggestions how to
help better, please don't hesitate to tell us.
On suggestion I'd
On Nov 17, 2011, at 8:10 AM, Wolfgang Denk wrote:
Dear Kumar Gala,
In message dec2dbe6-d658-4504-b157-7b57bb637...@kernel.crashing.org you
wrote:
As a first step this requires someone who is brave enought oclean up
the existing state, which is indeed a mess.
Can we say no new
On Nov 17, 2011, at 7:55 AM, Albert ARIBAUD wrote:
Hi Sandeep,
Le 16/11/2011 16:24, s-paul...@ti.com a écrit :
The following changes since commit 75acc4d7c1c9081e06d1197c6da01361cf1bce92:
Heiko Schocher (1):
arm, davinci: add DAVINCI_MMC_CLKID
are available in the git
On Nov 17, 2011, at 5:33 PM, Robert Hurdle wrote:
Hello Mr. Denk,
You wrote:
you wrote:
I downloaded the ELDK 4.2 and installed it. I got the u-boot
source from git://git.denx.de/u-boot-mpc85xx.git.
When I try to build u-boot for sbc8548 I get the following error:
On Nov 15, 2011, at 9:01 AM, Wolfgang Denk wrote:
Hello all,
I guess most of you will already have noticed that my activity on the
mailing list has significantly declined recently. I'm sorry for that,
but I find myself in a situation where I have even less time
available for U-Boot than
. This bit can be set
when setting MSR[FP], and can be cleared when clearing MSR[FP].
Alternatively, the bit can be set once at boot time, and never cleared.
There will be no performance degradation due to setting this bit.
Signed-off-by: Kumar Gala ga...@kernel.crashing.org
---
arch/powerpc/cpu
On Nov 12, 2011, at 2:07 PM, Simon Glass wrote:
Hi Kumar,
On Sat, Nov 12, 2011 at 10:02 AM, Kumar Gala ga...@kernel.crashing.org
wrote:
This reverts commit 355a835747c6f7c5071ead295a7dfc489c73cb03.
The original commit broke long standing assumption that md commands work
on effective
This reverts commit 355a835747c6f7c5071ead295a7dfc489c73cb03.
The original commit broke long standing assumption that md commands work
on effective addresses. This normally isn't an issue for most systems
that map 1:1, however on systems with a 36-bit address map it breaks.
Signed-off-by: Kumar
+phys_size_t fixed_sdram(void)
+{
+ char buf[32];
+ fsl_ddr_cfg_regs_t ddr_cfg_regs;
+ size_t ddr_size;
+ struct cpu_type *cpu;
+ ulong ddr_freq, ddr_freq_mhz;
+
+ cpu = gd-cpu;
+ /* P1020 and it's derivatives support max 32bit DDR width */
+ if (cpu-soc_ver ==
On Nov 10, 2011, at 3:11 PM, Ira W. Snyder wrote:
This adds support for the Freescale COM Express P2020 board. This board
is similar to the P1_P2_RDB, but has some extra (as well as missing)
peripherals.
Unlike all other mpc85xx boards, it uses a watchdog timeout to reset.
Using the
On Nov 1, 2011, at 8:16 PM, chang-ming.hu...@freescale.com
chang-ming.hu...@freescale.com wrote:
From: Jerry Huang chang-ming.hu...@freescale.com
In order to support 1920x01080 resolution, we must increase the alloc length.
Acked-by: Timur Tabi ti...@freescale.com
Signed-off-by: Jerry
is we want.
Otherwise, We will continue to calculate it with the next OD and RDW.
Signed-off-by: Jerry Huang chang-ming.hu...@freescale.com
CC: Kumar Gala kumar.g...@freescale.com
---
changes for v2:
- move these macro to .c file
- change the subject to powerpc/mpc85xx
On Nov 7, 2011, at 10:51 PM, Ramneek Mehresh wrote:
Include call to usb device-fixup only when CONFIG_HAS_FSL_DR_USB is
defined for the platform - P1020RDB, P1010RDB, P1020-PC
Signed-off-by: Ramneek Mehresh ramneek.mehr...@freescale.com
---
board/freescale/p1010rdb/p1010rdb.c |
On Nov 11, 2011, at 3:19 AM, Xie Xiaobo wrote:
Enable AR8021 as it used on Freescale Combo boards.
The Combo boards included P1020RDB-PC, P1021RDB-PC,
P2020RDB-PC, P1020UTM-PC, and P1020MSBG-PC.
Signed-off-by: Xie Xiaobo x@freescale.com
---
include/config_phylib_all_drivers.h |1
On Nov 9, 2011, at 9:15 AM, Kumar Gala wrote:
We cause CCSRBAR to be relocated in the SPL phase of NAND boot which
isn't expected and breaks things. Fixing the board config.h to NOT
relocate CCSR during the CONFIG_NAND_SPL phase.
Signed-off-by: Kumar Gala ga...@kernel.crashing.org
On Nov 8, 2011, at 11:04 AM, Kumar Gala wrote:
Reduce NAND SPL build size by not include TLB entries that arent used by
it.
Signed-off-by: Kumar Gala ga...@kernel.crashing.org
---
board/freescale/mpc8572ds/tlb.c |2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
applied
- k
On Nov 9, 2011, at 10:29 AM, Kumar Gala wrote:
Address 85xx specific gcc 4.6 warnings
applied 1-16
- k
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Size grew a bit so nand-spl didn't fit in 4k, reduce done by removing
LAW entries not needed during SPL phase.
Signed-off-by: Kumar Gala ga...@kernel.crashing.org
---
board/freescale/p1_p2_rdb_pc/law.c | 10 ++
1 files changed, 6 insertions(+), 4 deletions(-)
diff --git a/board
: Set SYSCLK to the required frequency
powerpc/85xx: Set max alloc length to 10MB on P1022DS
Kumar Gala (20):
powerpc/85xx: Add support for Book-E MMU Arch v2.0
powerpc/85xx: Fix MPC8572DS NAND build
powerpc/85xx: Fix NAND SPL support
arch/powerpc/cpu/mpc85xx/cpu_init.c
We cause CCSRBAR to be relocated in the SPL phase of NAND boot which
isn't expected and breaks things. Fixing the board config.h to NOT
relocate CCSR during the CONFIG_NAND_SPL phase.
Signed-off-by: Kumar Gala ga...@kernel.crashing.org
---
include/configs/MPC8536DS.h|2 +-
include
Fix:
ahci.c: In function 'ata_scsiop_read10':
ahci.c:564:6: warning: variable 'lba' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Kumar Gala ga...@kernel.crashing.org
---
drivers/block/ahci.c |3 ---
1 files changed, 0 insertions(+), 3 deletions(-)
diff --git a/drivers/block
: In function 'x86emuOp_into':
x86emu/ops.c:3579:9: warning: variable 'tmp' set but not used
[-Wunused-but-set-variable]
x86emu/ops.c: In function 'x86emuOp_aad':
x86emu/ops.c:3993:8: warning: variable 'a' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Kumar Gala ga...@kernel.crashing.org
bounds
[-Warray-bounds]
Signed-off-by: Kumar Gala ga...@kernel.crashing.org
---
drivers/block/sata_sil3114.c |4
1 files changed, 4 insertions(+), 0 deletions(-)
diff --git a/drivers/block/sata_sil3114.c b/drivers/block/sata_sil3114.c
index 1e60636..34fe038 100644
--- a/drivers/block
Address 85xx specific gcc 4.6 warnings
- k
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Fix:
cpu_init.c: In function 'cpu_init_r':
cpu_init.c:320:7: warning: variable 'l2srbar' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Kumar Gala ga...@kernel.crashing.org
---
arch/powerpc/cpu/mpc85xx/cpu_init.c |3 +--
1 files changed, 1 insertions(+), 2 deletions(-)
diff
Fix:
tlb.c: In function 'disable_tlb':
tlb.c:175:34: warning: variable '_mas7' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Kumar Gala ga...@kernel.crashing.org
---
arch/powerpc/cpu/mpc85xx/tlb.c |5 ++---
1 files changed, 2 insertions(+), 3 deletions(-)
diff --git a/arch
Fix:
fsl_lbc.c: In function 'upmconfig':
fsl_lbc.c:110:9: warning: variable 'mdr' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Kumar Gala ga...@kernel.crashing.org
---
arch/powerpc/cpu/mpc8xxx/fsl_lbc.c |4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git
1 - 100 of 2283 matches
Mail list logo