@lissyx is that an Intel or Ryzen P14s you have?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1971656
Title:
rtw89_pci failure on Lenovo P14s with Ubuntu 22.04
To manage notifications about this
Thanks for your reply Aaron. Is there an official Ubuntu package for
kernel 5.18-rc which I could try?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1971656
Title:
rtw89_pci failure on Lenovo P14s
Public bug reported:
On a Lenovo P14s (RTL8111/8168/8411), the WiFi connection gets stuck at
times. When this happens, there is no way to use `sudo`, the WiFi GNOME
UI says NetworkManager is not running (which it is), and `dmesg -w`
continuously outputs:
```
[90296.470925] rtw89_pci
Scratch that previous comment. Switching to Alsa Capture Device solves
the sound problem only. The screen capture issue is only solved by
switching to Xorg instead of Wayland (but then the CPU suffers from the
fractional scaling).
--
You received this bug notification because you are a member of
I tried using Alsa Capture Device instead of PipeWire and got good results:
- sound is fine (when using Default device, got no sound at all when choosing
device manually in lsit)
- screen capture is reactive
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Notes:
- I tried to switch to Xorg: the screen capture works well, but the sound
crackling is even worse (probably because the CPU is used more heavily under
Xorg due to fractional scaling)
- Everything worked fine under Ubuntu 21.10 (with OBS 27.0.1+dfsg1-1)
--
You received this bug
Public bug reported:
Since updating to Ubuntu 22.04, OBS (27.2.3+dfsg1-1) has become unusable
for recording:
- the screen capture (pipewire with xdg-desktop-portal) is very laggy: when
passing slides on the captured screen, OBS stays stuck on previous frames
- the sound input (pulseaudio) is
As commented before, the fix released in `-proposed` worked for me.
Since updating to `1.201.5` via `-updates` though, I'm seeing the bug
again.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1960933
I can confirm that the proposed package already improves the situation
quite a bit.
As far as I can tell, I've only experienced 3 disconnections since last
night, without setting any of the `disable_*` parameters.
If there's a package to test the new patch from the 25th of Feb, I'm
willing to
Hi,
I'm experiencing the exact same bug on impish with a Lenovo P14s, with
connection drops every 5 to 10 minutes.
I've just installed the proposed package and will update the bug report
tomorrow if the connection drops have stopped.
--
You received this bug notification because you are a
Public bug reported:
Please sync augeas 1.7.0-0.1 (main) from Debian unstable (main)
** Affects: augeas (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Ah right, there were chromium processes still running even after closing
and restarting it.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1641380
Title:
chromium-browser:
This doesn't seem fixed on Xenial, using
53.0.2785.143-0ubuntu0.16.04.1.1257:
chromium-browser (53.0.2785.143-0ubuntu0.16.04.1.1257) xenial-security;
urgency=medium
* debian/patches/defang-ct-timebomb: backport TLS cert invalidity based
on build-time. (LP: #1641380)
-- Chad MILLER
https://launchpad.net/ubuntu/+source/augeas/1.6.0-0ubuntu2
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1580731
Title:
augeas-lenses filter for PHP files doesn't match php7.0-* files
To manage
I could add this patch to the augeas 1.6 package in Yakkety. Do we want
to include it in Xenial, too though?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1580731
Title:
augeas-lenses filter for
I don't think this is worth maintaining a patch. It's easy enough in augeas
to add new transforms using aug_transform or the --transform flag.
On 26 Feb 2015 16:15, Robie Basak 1425...@bugs.launchpad.net wrote:
Thank you annunaki2k2 and Raphaël.
I think this is valid and trivial enough to fix
I don't think this is worth maintaining a patch. It's easy enough in augeas
to add new transforms using aug_transform or the --transform flag.
On 26 Feb 2015 16:15, Robie Basak 1425...@bugs.launchpad.net wrote:
Thank you annunaki2k2 and Raphaël.
I think this is valid and trivial enough to fix
Merged upstream.
--
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to augeas in Ubuntu.
https://bugs.launchpad.net/bugs/1425183
Title:
augeas-lense for apache does not support new conf-available layout
To manage notifications about this
Merged upstream.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1425183
Title:
augeas-lense for apache does not support new conf-available layout
To manage notifications about this bug go to:
Hello and thanks for reporting this bug.
Would you mind providing the patch as a PR on GitHub? [0]
This way I can simply merge it upstream and it will be easier to fix.
Thank you!
[0] https://github.com/hercules-team/augeas
--
You received this bug notification because you are a member of
The ls command in augtool is not recursive. If you use print instead, you
will see the full trees.
Le 20 juil. 2014 00:15, Hadmut Danisch had...@danisch.de a écrit :
Public bug reported:
Hi,
another problem with the squid lens: It does not detect acl clauses
correctly. It just lists
The ls command in augtool is not recursive. If you use print instead, you
will see the full trees.
Le 20 juil. 2014 00:15, Hadmut Danisch had...@danisch.de a écrit :
Public bug reported:
Hi,
another problem with the squid lens: It does not detect acl clauses
correctly. It just lists
http://askubuntu.com/questions/449824/cant-run-vidalia-due-to-an-
apparmor-policy-error is related (and fixes the issue).
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1332870
Title:
hat type=augeas_dev
I'll be happy to merge your patch. Please open a PR against
https://github.com/hercules-team/augeas and add unit tests for your bug, and
I'll merge it.
/hat
hat type=ubuntu_dev
If you think this should be fixed in trusty, I can also get the patch into the
package and see if
On Tue, Apr 8, 2014 at 8:40 PM, Jurjen Bokma j.bo...@rug.nl wrote:
Ok, I cloned the GitHub repository, forked, making changes.
As for unit tests, it looks to me like an entire lens is the unit of
testing, so I would edit lenses/tests/test_krb5.aug to include some
previously unparsed in- and
hat type=augeas_dev
I'll be happy to merge your patch. Please open a PR against
https://github.com/hercules-team/augeas and add unit tests for your bug, and
I'll merge it.
/hat
hat type=ubuntu_dev
If you think this should be fixed in trusty, I can also get the patch into the
package and see if
On Tue, Apr 8, 2014 at 8:40 PM, Jurjen Bokma j.bo...@rug.nl wrote:
Ok, I cloned the GitHub repository, forked, making changes.
As for unit tests, it looks to me like an entire lens is the unit of
testing, so I would edit lenses/tests/test_krb5.aug to include some
previously unparsed in- and
This tree is the intended behavior. It is the same as the Httpd lens for
Apache configuration files.
What exactly does that prevent you from modifying?
--
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to augeas in Ubuntu.
This tree is the intended behavior. It is the same as the Httpd lens for
Apache configuration files.
What exactly does that prevent you from modifying?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Reported upstream as https://github.com/hercules-team/augeas/issues/95.
Please feed the bug there (or even submit a PR).
--
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to augeas in Ubuntu.
https://bugs.launchpad.net/bugs/1193176
Title:
Reported upstream as https://github.com/hercules-team/augeas/issues/95.
Please feed the bug there (or even submit a PR).
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1193176
Title:
augeas-lenses
Public bug reported:
This device used to work perfectly with raring. It doesn't turn on when
starting, e.g. cheese:
$ lsusb | grep Webcam
Bus 001 Device 003: ID 046d:0825 Logitech, Inc. Webcam C270
dmesg doesn't output anything about the device when launching cheese.
** Affects: ubuntu
Public bug reported:
The HP deskjet e-all-in-one 3520 scanner (network scanner connected
through wifi) used to be recognized automatically on raring. All I had
to do was launch simple-scan and it detected it. This doesn't work on
saucy anymore.
** Affects: ubuntu
Importance: Undecided
Unplugging and replugging the USB plug did it.
** Changed in: ubuntu
Status: New = Invalid
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1275459
Title:
Logitech C270 webcam stopped working
Right, my mistake. I haven't gotten much time to look into it for now,
but I will now.
--
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to augeas in Ubuntu.
https://bugs.launchpad.net/bugs/1216917
Title:
FTBFS due to test failures
To
Right, my mistake. I haven't gotten much time to look into it for now,
but I will now.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1216917
Title:
FTBFS due to test failures
To manage
This is linked to a gnulib update in Saucy apparently. We should try to
update the gnulib submodule in Augeas and try to build again.
--
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to augeas in Ubuntu.
This is linked to a gnulib update in Saucy apparently. We should try to
update the gnulib submodule in Augeas and try to build again.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1216917
Title:
Public bug reported:
In pam_google_authenticator (8), the man page says:
The current version requires the existance of ~/.google-
authenticator.
when the file is actually ~/.google_authenticator.
** Affects: google-authenticator (Ubuntu)
Importance: Undecided
Status: New
--
Public bug reported:
When printing a document in libreoffice, if I select more than one copy
in Number of copies, only 1 copy is ever printed.
This doesn't seem to be a bug with the printing system (or the printer)
since it works with other programs.
I am using libreoffice 1:3.5.1-1ubuntu1 in
Hint for whoever meets this bug and needs to print a lot of documents:
export to PDF (not using Cups-PDF, but the PDF export button) and print
from your favorite PDF editor.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Public bug reported:
Using mcollective 1.2.1+dfsg-2ubuntu1 in Ubuntu Precise:
root@wrk4 (staging) (wrk-c2c):~# ps axuww | grep mco
root 9753 0.0 0.0 11380 928 pts/0S+ 13:42 0:00 grep mco
root@wrk4 (staging) (wrk-c2c):~# service mcollective start
mcollective start/running,
Thank you.
--
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to mcollective in Ubuntu.
https://bugs.launchpad.net/bugs/965188
Title:
Mcollective is launched more than once
To manage notifications about this bug go to:
Public bug reported:
Using mcollective 1.2.1+dfsg-2ubuntu1 in Ubuntu Precise:
root@wrk4 (staging) (wrk-c2c):~# ps axuww | grep mco
root 9753 0.0 0.0 11380 928 pts/0S+ 13:42 0:00 grep mco
root@wrk4 (staging) (wrk-c2c):~# service mcollective start
mcollective start/running,
Thank you.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/965188
Title:
Mcollective is launched more than once
To manage notifications about this bug go to:
I have the same issue.
When I installed my machine in Precise, network-manager-openvpn was
correctly set up using gconf. Then I reinstalled the machine, keeping
the home directory, and the settings disappeared.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which
http://mail.gnome.org/archives/commits-list/2011-February/msg03861.html
indicates that gconf is no longer used.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/934349
Title:
network-manager-openvpn
It could be linked to
http://fedoraproject.org/wiki/Features/GConfRemoval
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/934349
Title:
network-manager-openvpn does not see gconf configured
The connections are now stored in /etc/NetworkManager/system-
connections, in IniFile files.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/934349
Title:
network-manager-openvpn does not see gconf
I cannot reproduce this bug. On a DL 380G5 running Hardy Heron:
# array-info -l
array-info v0.13.0 by Benoit Gaussen (b...@trez42.net)
Usage:
array-info -d array_device_path [-a|-l|-A|-c|-s|-L|-h]
Options:
--device=PATH -d path to array device
--all-drives -a show
The kernel I'm using is 2.6.24-25-server.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/374928
Title:
Array-info crash which used with -l option
To manage notifications about this bug go to:
# /usr/sbin/array-info -ld /dev/cciss/c0d0
Unknown Controller id 0x3234103c
Firmware revision : 5.20
Rom revision : 5.20
1 logical drive configured.
Logical drive 0 :
Fault tolerance : RAID 1 (Mirroring)
Size: 136.70 GiB
This was fixed upstream. I will make a patch in precise.
--
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to augeas in Ubuntu.
https://bugs.launchpad.net/bugs/838010
Title:
/usr/share/augeas/lenses/dist/aliases.aug does not parse valid
) = Raphaël Pinson (raphink)
** Changed in: augeas (Ubuntu Natty)
Milestone: None = natty-updates
--
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to augeas in Ubuntu.
https://bugs.launchpad.net/bugs/807675
Title:
please port 0.8.1 for Natty
)
Assignee: (unassigned) = Raphaël Pinson (raphink)
** Changed in: augeas (Ubuntu Natty)
Status: In Progress = Fix Committed
--
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to augeas in Ubuntu.
https://bugs.launchpad.net/bugs/807675
SRU information:
[Impact]
This bug prevents from parsing the default sudoers file in natty with Augeas
[Development Fix]
Grabbing patches from Augeas tickets 188 and 211 fixes the bug. A package with
these two patches has been uploaded to my PPA with version
0.8.0-0ubuntu5~pparaphink1 :
Uploaded to precise:
augeas (0.10.0-0ubuntu3) precise; urgency=low
.
* Add LP838010_sudoers.patch to (LP: #838010).
** Changed in: augeas (Ubuntu)
Status: Confirmed = Fix Committed
** Changed in: augeas (Ubuntu)
Assignee: (unassigned) = Raphaël Pinson (raphink)
--
You
** Changed in: augeas (Ubuntu)
Status: In Progress = Fix Committed
--
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to augeas in Ubuntu.
https://bugs.launchpad.net/bugs/807675
Title:
please port 0.8.1 for Natty
To manage
This was fixed upstream. I will make a patch in precise.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/838010
Title:
/usr/share/augeas/lenses/dist/aliases.aug does not parse valid
/etc/aliases
) = Raphaël Pinson (raphink)
** Changed in: augeas (Ubuntu Natty)
Milestone: None = natty-updates
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/807675
Title:
please port 0.8.1 for Natty
To manage
SRU information:
[Impact]
This bug prevents from parsing the default sudoers file in natty with Augeas
[Development Fix]
Grabbing patches from Augeas tickets 188 and 211 fixes the bug. A package with
these two patches has been uploaded to my PPA with version
0.8.0-0ubuntu5~pparaphink1 :
)
Assignee: (unassigned) = Raphaël Pinson (raphink)
** Changed in: augeas (Ubuntu Natty)
Status: In Progress = Fix Committed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/807675
Title:
please
This is now fixed in precise. I'll subscribe ubuntu-sru to decide
whether this should be backported to oneiric (where synergy doesn't work
with GNOME3 currently).
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Uploaded to precise:
augeas (0.10.0-0ubuntu3) precise; urgency=low
.
* Add LP838010_sudoers.patch to (LP: #838010).
** Changed in: augeas (Ubuntu)
Status: Confirmed = Fix Committed
** Changed in: augeas (Ubuntu)
Assignee: (unassigned) = Raphaël Pinson (raphink)
--
You
** Changed in: augeas (Ubuntu)
Status: In Progress = Fix Committed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/807675
Title:
please port 0.8.1 for Natty
To manage notifications about this
Version 1.3.8 fixes this bug. It will be synced soon from wheezy into
precise. Given the importance of this bug, it should probably be
backported to oneiric once 1.3.8 is in precise.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
.
** Changed in: augeas (Ubuntu)
Status: New = Fix Released
** Changed in: augeas (Ubuntu)
Assignee: (unassigned) = Raphaël Pinson (raphink)
--
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to augeas in Ubuntu.
https
.
** Changed in: augeas (Ubuntu)
Status: New = Fix Released
** Changed in: augeas (Ubuntu)
Assignee: (unassigned) = Raphaël Pinson (raphink)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs
In our case, this is not a grub1 issue, we use grub2.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/687392
Title:
Kernel panic with 2.6.32-26 security upgrade
--
ubuntu-bugs mailing list
I've tested the packages in lucid-proposed, they work perfectly. Please
sync them to lucid-updates.
** Changed in: libpoe-component-client-dns-perl (Ubuntu)
Status: New = Fix Committed
** Changed in: libpoe-component-client-http-perl (Ubuntu)
Status: New = Fix Committed
** Changed
** Tags added: verification-done
** Tags removed: verification-needed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/684837
Title:
Package libpoe-component-client-http-perl FTBFS in Lucid
--
Thanks Steve. I've tested the deb generated by the build (it's still in
the NEW queue) and it works fine. As soon as the binary package is
approved, libpoe-component-client-http-perl can be pushed, too.
Now there's probably quite a few other packages that FTBFS because of
these, maybe it would be
Ok, I did a quick search for packages that build-depended on these 3 in
Lucid (and hence must FTBFS, too). Here are the results:
libpoe-component-irc-perl build-depends on libpoe-component-client-dns-perl ;
libpoe-component-server-simplehttp-perl build-depends on
Great. libpoe-component-client-http-perl is now built and in the NEW
queue for Lucid. After it's accepted, the 3 packages will be in lucid-
proposed. What's the next step to get them to -updates?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
Public bug reported:
Upgrading to the latest kernel on Lucid (2.6.32-26.48) yields on kernel
panic upon reboot with:
VFS: Unable to mount root fs on unknown-block(0,0)
This bug has been reported by other users on the forums, see
http://ubuntuforums.org/showthread.php?t=1625986 for example.
** Attachment added: Dmesg (from the working kernel, i.e. 2.6.32-22)
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/687392/+attachment/1759700/+files/dmesg.log
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
** Attachment added: lspci -vvnn output
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/687392/+attachment/1759705/+files/lspci-vvnn.log
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/687392
** Attachment added: uname -a output
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/687392/+attachment/1759706/+files/uname-a.log
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/687392
** Attachment added: /proc/version_signature contents
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/687392/+attachment/1759707/+files/version.log
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
@Fabio: thanks for your comment.
It happen to be that I have to use Ctrl+Alt+F8 and not F7 on this
machine, but it would fail after switching to a tty.
When I said I get a gdm login, I really meant a login screen, not an
unlock screen. Of course I don't want my screen to be unlocked when the
Thank you Steve. I've tested the package, it works fine. Can you now
accept libpoe-component-client-keepalive-perl so it can build on top of
libpoe-component-client-dns-perl?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Public bug reported:
Binary package hint: libpoe-component-client-http-perl
The libpoe-component-client-http-perl package FTBFS in lucid.
While investigating and trying to rebuild it, I found that a whole list
of perl packages related to this one FTBFS.
libpoe-component-client-http-perl
** Also affects: libpoe-component-client-dns-perl (Ubuntu)
Importance: Undecided
Status: New
** Also affects: libpoe-component-client-keepalive-perl (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Bugs,
Thank you.
--
[MIR] naturaldocs
https://bugs.launchpad.net/bugs/677822
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to augeas in ubuntu.
--
Ubuntu-server-bugs mailing list
Ubuntu-server-bugs@lists.ubuntu.com
Modify settings or
Thank you Martin.
--
[MIR] naturaldocs
https://bugs.launchpad.net/bugs/677822
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to augeas in ubuntu.
--
Ubuntu-server-bugs mailing list
Ubuntu-server-bugs@lists.ubuntu.com
Modify settings or
Thank you.
--
[MIR] naturaldocs
https://bugs.launchpad.net/bugs/677822
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Thank you Martin.
--
[MIR] naturaldocs
https://bugs.launchpad.net/bugs/677822
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
** Changed in: augeas (Ubuntu)
Status: New = Fix Released
--
[MIR] naturaldocs
https://bugs.launchpad.net/bugs/677822
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
** Also affects: augeas (Ubuntu)
Importance: Undecided
Status: New
--
[MIR] naturaldocs
https://bugs.launchpad.net/bugs/677822
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to augeas in ubuntu.
--
Ubuntu-server-bugs mailing
I've searched a bit and found a few projects that generate their docs
with NaturalDocs. Among them are maatkit, mootools and quite a few web
projects. None of these are in main right now.
It is quite hard to guess which projects are using it because there is
no common way of recognizing files
After further investigation, NaturalDocs is used by mostly web projects
(SOAP APIs, JavaScript libraries), few of them are in Ubuntu.
Other than that, I identified a few more projects in Ubuntu which use
NaturalDocs, such as skytools, xul-ext-firegpg, libsscm3, libfreebasic
or libfann1. All these
I've searched a bit and found a few projects that generate their docs
with NaturalDocs. Among them are maatkit, mootools and quite a few web
projects. None of these are in main right now.
It is quite hard to guess which projects are using it because there is
no common way of recognizing files
After further investigation, NaturalDocs is used by mostly web projects
(SOAP APIs, JavaScript libraries), few of them are in Ubuntu.
Other than that, I identified a few more projects in Ubuntu which use
NaturalDocs, such as skytools, xul-ext-firegpg, libsscm3, libfreebasic
or libfann1. All these
Public bug reported:
Binary package hint: naturaldocs
The augeas package (https://launchpad.net/ubuntu/natty/+source/augeas)
provides a way to document its APIs using NaturalDocs. This
functionality has been activated in the latest build uploaded to Natty
(0.7.4-0ubuntu1) but the naturaldocs
** Also affects: augeas (Ubuntu)
Importance: Undecided
Status: New
--
[MIR] naturaldocs
https://bugs.launchpad.net/bugs/677822
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Thank you for your answer Colin. I reported the SIGHUP part in this bug
because this seems to be what the traditional init script does when
doing a reload of ssh, and this is the reason why such an operation
fails to combine with Upstart.
--
[LUCID] /etc/init.d/ssh seems to work, but actually
Thank you for your answer Colin. I reported the SIGHUP part in this bug
because this seems to be what the traditional init script does when
doing a reload of ssh, and this is the reason why such an operation
fails to combine with Upstart.
--
[LUCID] /etc/init.d/ssh seems to work, but actually
The state in lucid is really problematic. Afaik, the init.d scripts are
supposed to provide wrappers for upstart in the transition period, and
we are using them in a lot of old scripts to manage our fleet. Reloading
ssh with /etc/init.d/ssh reload resulted in a weird state where
upstart believes
The state in lucid is really problematic. Afaik, the init.d scripts are
supposed to provide wrappers for upstart in the transition period, and
we are using them in a lot of old scripts to manage our fleet. Reloading
ssh with /etc/init.d/ssh reload resulted in a weird state where
upstart believes
This bug is still present in Lucid, and adapting ~/.config/monitors.xml
fixes it for me.
--
nvidia-settings does not keep resolution that it is set too and xorg.conf is
useless
https://bugs.launchpad.net/bugs/362704
You received this bug notification because you are a member of Ubuntu
Bugs,
1 - 100 of 161 matches
Mail list logo