It's been a very very long time since I've last ran a Windows virtual
machine on Ubuntu, so I can't really tell. I do remember I never got it
"fixed", but did find a fix for it by disabling the Windows power plan
option "Allow Windows to put this device to sleep". Over the years I did
get some
I also suffer from this issue for a long time. All my computers work
fine, however my Ubuntu homeserver running virtual machines have
problems when I try to connect to them over IPv6 locally. They work at
first and then suddenly it stops working due to the neighbour
advertisement not reaching my
I'm having a similar issue. I have disabled Route Advertisement
(accept_ra=0) in sysctl.conf file, but at boot I still get a default
IPv6 route to my router with an RA flag, which means it was assigned
using a ra.
The default route expires soon after the boot, as it does not get
renewed. This
Apparently, this issue was caused by the host having high utilisation on
the CPU on host boot. This caused the guests to not have their
interfaces configured in time. The link on an interface can be up while
the interface itself is not yet fully initialised. This causes the
networking-services to
I'm having a similar issue on Ubuntu 16.04 as host. When the guests are
on autostart and I boot the host, I can see an error message on the
guests' while booting: "Failed to start Raise network interfaces".
I've tried the methods above by adding a sleep to the init file.
however, the init file
Glad to hear you solved they issue by reading this bug report, Maarten!
As you can see the bug has been updated with the confirmed-status on
October 21st of 2015 and I hope they can fix this a.s.a.p. I don't have
a Windows-guest anymore, but even for all the other Qemu-users out there
that do, I'd
Glad to hear you solved they issue by reading this bug report, Maarten!
As you can see the bug has been updated with the confirmed-status on
October 21st of 2015 and I hope they can fix this a.s.a.p. I don't have
a Windows-guest anymore, but even for all the other Qemu-users out there
that do, I'd
Ok, thanks for the info! By Rubin, do you mean Ruben (a.k.a. me)? :D
--
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to qemu in Ubuntu.
https://bugs.launchpad.net/bugs/1323758
Title:
Mouse stops working when connected
Ok, thanks for the info! By Rubin, do you mean Ruben (a.k.a. me)? :D
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1323758
Title:
Mouse stops working when connected usb-storage-device
To manage
Any news on this?
--
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to qemu in Ubuntu.
https://bugs.launchpad.net/bugs/1323758
Title:
Mouse stops working when connected usb-storage-device
To manage notifications about this bug go to:
Any news on this?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1323758
Title:
Mouse stops working when connected usb-storage-device
To manage notifications about this bug go to:
Using the latest upstream version the bug still exists. I have to
disable the option that Windows can put the USB Input Device to sleep in
order to make the mouse move again.
--
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to qemu-kvm in
Using the latest upstream version the bug still exists. I have to
disable the option that Windows can put the USB Input Device to sleep in
order to make the mouse move again.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
I'm using 14.04. I could give it a try. Is it easy to revert to the
older version of Qemu once upgraded to the upstream one?
--
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to qemu-kvm in Ubuntu.
https://bugs.launchpad.net/bugs/1323758
I'm using 14.04. I could give it a try. Is it easy to revert to the
older version of Qemu once upgraded to the upstream one?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1323758
Title:
Mouse stops
I am now installing Windows 7 SP1 x64 to see if it suffers from the same
bug/problem. I'll report back when I have more information!
--
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to qemu-kvm in Ubuntu.
I can confirm that this bug/problem does not seem to exist in Windows 7
SP1 x64! I could use this version of Windows w/ my external hard drives,
but it's strange that this exact same set-up does not work on Windows 8
(causing the vnc mouse to freeze). This could and should be a Windows 8
driver
I finally found a fix for this bug/problem! It is in fact a bug, but I
don't know wether it is a Windows bug or a Qemu/VNC-bug. After
connecting a massive storage device to the Windows 8.1 guest, the mouse
stops working because it goes into a sleep-state.
This bug can be fixed by going to WIN +
I am now installing Windows 7 SP1 x64 to see if it suffers from the same
bug/problem. I'll report back when I have more information!
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1323758
Title:
I can confirm that this bug/problem does not seem to exist in Windows 7
SP1 x64! I could use this version of Windows w/ my external hard drives,
but it's strange that this exact same set-up does not work on Windows 8
(causing the vnc mouse to freeze). This could and should be a Windows 8
driver
I finally found a fix for this bug/problem! It is in fact a bug, but I
don't know wether it is a Windows bug or a Qemu/VNC-bug. After
connecting a massive storage device to the Windows 8.1 guest, the mouse
stops working because it goes into a sleep-state.
This bug can be fixed by going to WIN +
Any news on this yet? I do not want to hurry you but it has been a bit
quiet.
--
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to qemu-kvm in Ubuntu.
https://bugs.launchpad.net/bugs/1323758
Title:
Mouse stops working when connected
Any news on this yet? I do not want to hurry you but it has been a bit
quiet.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1323758
Title:
Mouse stops working when connected usb-storage-device
To
Thanks for the response!
Yes, the hard drive does become available in the Windows vm. I can use
it as I would normally do in a non-virtual environment. I have not yet
tried any other Windows version. I'm running Windows 8.1 x64.
--
You received this bug notification because you are a member of
Thanks for the response!
Yes, the hard drive does become available in the Windows vm. I can use
it as I would normally do in a non-virtual environment. I have not yet
tried any other Windows version. I'm running Windows 8.1 x64.
--
You received this bug notification because you are a member of
** Description changed:
I'm running a guest that has Windows 8 Pro (x64) installed. Every time I
pass through a usb storage device from the host to the guest, the mouse
stops working in the vnc client. When I remove the usb-device the mouse
works again.
The mouse only stops working
** Description changed:
I'm running a guest that has Windows 8 Pro (x64) installed. Every time I
pass through a usb storage device from the host to the guest, the mouse
stops working in the vnc client. When I remove the usb-device the mouse
works again.
The mouse only stops working
Thanks for the reply!
First of all, vlc was a type. Should have been vnc. If I restart the vnc
viewer (client) the mouse still does not work. Even connecting from
another computer does not seem to fix the problem.
I'm using Virtual Machine Manager (virt-manager) to assign the usb-
device to the
I' very sorry, but I forgot to add the xml files before clicking 'Post
Comment' and it seems that I cannot edit my posts (only the poststart).
Here they are:
[BEFORE ADDING DEVICE]
domain type='kvm'
namevm01/name
uuid4ffa27ba-cb99-6375-23ab-92913e18cf75/uuid
Some more information that I think is relevant:
The motherboard that the server uses is an IPIBL-LA
(http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01247779tmp_task=prodinfoCategorycc=bedlc=nllc=nlproduct=3627668#N84)
and according to the specifications it has all USB 2.0 ports. However in
Thanks for the reply!
First of all, vlc was a type. Should have been vnc. If I restart the vnc
viewer (client) the mouse still does not work. Even connecting from
another computer does not seem to fix the problem.
I'm using Virtual Machine Manager (virt-manager) to assign the usb-
device to the
I' very sorry, but I forgot to add the xml files before clicking 'Post
Comment' and it seems that I cannot edit my posts (only the poststart).
Here they are:
[BEFORE ADDING DEVICE]
domain type='kvm'
namevm01/name
uuid4ffa27ba-cb99-6375-23ab-92913e18cf75/uuid
Some more information that I think is relevant:
The motherboard that the server uses is an IPIBL-LA
(http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01247779tmp_task=prodinfoCategorycc=bedlc=nllc=nlproduct=3627668#N84)
and according to the specifications it has all USB 2.0 ports. However in
Public bug reported:
I'm running a guest that has Windows 8 Pro (x64) installed. Every time I
pass through a usb storage device from the host to the guest, the mouse
stops working in the vnc client. When I remove the usb-device the mouse
works again.
The mouse only stops working when I pass
Public bug reported:
I'm running a guest that has Windows 8 Pro (x64) installed. Every time I
pass through a usb storage device from the host to the guest, the mouse
stops working in the vnc client. When I remove the usb-device the mouse
works again.
The mouse only stops working when I pass
35 matches
Mail list logo
