Wayne, I filed a new bug #671802 for my problem. How do I get the
protocol log you've mentioned?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/491170
Title:
Wrong E-Mail displayed in message pane
Thanks Ludovic! You are one ubiquitous fellow :D! I asked here because
Wayne requested the log here.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/491170
Title:
Wrong E-Mail displayed in message
Thank you for the tip, Wayne! Unfortunately, this mismatch between
headers and message bodies occurs both in TB3 AND TB5 for me. I noticed
it first with TB3 on Ubuntu 10.10 64 bit. With Win 7 on a different
machine I went for TB 5 as soon as it was available. I specifically
created a new profile
Since I thought of the BetterConversation plugin as the culprit for the
mismatch bewteen headers and message bodies I deactivated it. I decided
to use on-board functions from Thunderbird 5 to have a similar
functionality: I enabled grouping by topic and copied all my sent
messages to the
I am using TB 3.1.10 with a German Ubuntu 10.10 64 bit. This mis-match
between header and message body occurs on my system, as well. I started
noticing it after installing the BetterConversation add-on and blamed
it for the errors. However, I still get this behavior after uninstalling
the add-on.
I am using GMX as mail provider, however, I've no idea what kind of IMAP
server they're running.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/491170
Title:
Wrong E-Mail displayed in message pane
I am using TB 3.1.10 with a German Ubuntu 10.10 64 bit. This mis-match
between header and message body occurs on my system, as well. I started
noticing it after installing the BetterConversation add-on and blamed
it for the errors. However, I still get this behavior after uninstalling
the add-on.
Alberto, please clarify comment #24! My clean installation of Natty 64
bit does not exhibit obvious problems such as those posted by some of
the others but the output of glxgears still looks strange and hardly
moving (despite some 7000 fps reported).
It's my home machine that's affected so I
Of course I also have the message about the nVidia driver being active
but unused :) ...
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/771788
Title:
nVidia driver activated and apparently being
lspci|grep nVidia:
03:00.0 VGA compatible controller: nVidia Corporation G71 [GeForce 7900 GTX]
(rev a1)
cat /etc/lsb-release:
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=11.04
DISTRIB_CODENAME=natty
DISTRIB_DESCRIPTION=Ubuntu 11.04
uname -a:
Linux Waldriese 2.6.38-8-generic #42-Ubuntu SMP Mon Apr 11
For me the main problem seem to be contacts that I have entered as Dr.
John Doe. Evolutions doesn't seem to like addressees with a full stop
in them.
--
autofill problem evolution enter breaks address
https://bugs.launchpad.net/bugs/300637
You received this bug notification because you are a
Obviously, my statement was too fast and therefore incorrect. Both my
two 64 bit machines start tilda w/o real transparancy which makes sense
after Alexandre's explanation. My third box at home might be slow enough
to bring up compiz first, because I didn't notice the flaw here. Maybe
this kinda
On my work system (64 bit Lucid) the problem persists. Autostarted tilda
comes up without transparency. Will try your workaround, Alexandre!
--
Tilda without true tansparency after system start
https://bugs.launchpad.net/bugs/518447
You received this bug notification because you are a member of
Public bug reported:
Binary package hint: gscan2pdf
If I set gscan2pdf to use the scanimage-perl frontend and try to scan a
page I get an error window about a value in line 401 of the perl
configuration (see attached image) being uninitialized. Confirming this
dialog immediately brings up a
** Attachment added: Error02.png
http://launchpadlibrarian.net/47919094/Error02.png
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/47918799/Dependencies.txt
--
gscan2pdf reports uninitialized values with frontend scanimage-perl
https://bugs.launchpad.net/bugs/576283
** Attachment added: Error03.png
http://launchpadlibrarian.net/47919133/Error03.png
** Description changed:
Binary package hint: gscan2pdf
- If I set gscan2pdf to use the scanimage-perl frontend I get an error
- window about a value in line 401 of the perl configuration (see attached
-
My three Lucid boxes do not suffer from this problem anymore; all shut
down cleanly.
--
Lockup on shutdown after Lucid kernel upgrade to 2.6.32-10
https://bugs.launchpad.net/bugs/506268
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
For me, shutdown works now with the latest Lucid version, on both
platforms (32 and 64 bit). No more problems, as far as I can see.
--
[lucid] unable to shutdown
https://bugs.launchpad.net/bugs/498607
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
That last suggestions sounds very reasonable to me! But, luckily my
laptop now works with tilda and transparency (64 bit Lucid) without
workarounds. Have to test it with my other box, though. Will report
back.
--
Tilda without true tansparency after system start
I hope I am not confusing things here ... My lucid 32 bit system (up to
date) suffered from the same problem. I'm creating presentations for my
lectures so it's a bit silly not being able to use a true fullscreen
presentation mode.
Now, I decided to remove the Ubuntu version of OO3.2 and
For me the problem still persists, as well. And according to the Ubuntu
home page the installer from the NVidia driver won't work in the current
state of affairs. So I am stuck with the Ubuntu driver for my Geforce
7900GTX. Anything else I can test ...?
--
[lucid] unable to shutdown
The problem still exists for me. Reboot works, Shutdown ends the GUI,
but the screen with 10.04 and the four dots stay visible forever. I
connected to the box from my laptop via ssh and looked for zombies in
top but couldn't find any. So the system was still running and
accessible with ssh.
This time I tried to shutdown the system remotely only by a ssh
connection. The first shutdown -hP now brought up the now familiar
screen with
Ubuntu 10.04
. . . .
with those four dots changing their color and closed the ssh connection
but the system hung there, anyway. I had to connect to
I experience a similar problem an a Lucid system (32 bit) installed with
the Alpha 2 ISO and updated via apt ever since.
sudo reboot now
works, but
sudo shutdown -hP now
only ends the GUI, leaving a completely blank screen.
C+A+D produced a message about alsa-mixer for a split-second, then
*** This bug is a duplicate of bug 497299 ***
https://bugs.launchpad.net/bugs/497299
I'm a bit confused --- the heading says something about Lucid having a
problem with CUPS, but the system in the first post seems to be Karmic?
Also, there's a warning message about this bug being a duplicate
I am not sure if I experience the same bug, but it seems like it. I am
running a Lucid 32 bit with latest updates and am unable to shutdown the
system cleanly. It does not matter whether I use the GUI or a terminal
or tty1, the box hangs after a split-second of activity. Only
Ctrl+Alt+Del will
My Dell PowerEdge T610 has no floppy option in BIOS whatsoever. I still
get the biosdisk read error.
--
grub2 shows 'biosdisk read error', then boots
https://bugs.launchpad.net/bugs/396564
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Public bug reported:
Binary package hint: tilda
I included Tilda in my startup applications. After a fresh system start
tilda can be opened with F12 (custom setting). However, despite its
configuration, the appearing window does not provide true transparency.
Once I've closed the fresh tilda
** Attachment added: tilda without true transparency after system startup
http://launchpadlibrarian.net/38861820/tilda_after_startup.png
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/38861821/Dependencies.txt
** Attachment added: ProcMaps.txt
** Attachment added: tilda with true transparency after being shut down and
restarted
http://launchpadlibrarian.net/38861855/tilda_after_restart.png
--
Tilda without true tansparency after system start
https://bugs.launchpad.net/bugs/518447
You received this bug notification because you are
I experience the same thing.
Two 1 TB drives are set up with two partitions each: one for /boot, one
for LVM. Inside the logic volumegroups are separate logic volumes for /,
/var, /tmp and swap. Both partitions are mirrored with software RAID
(level 1).
The other eight 1 TB drives are hooked up
I might add that the abovementioned configuration was freshly installed
on a brandnew Dell PowerEdge T610, i.e. no update from an older release.
--
grub2 shows 'biosdisk read error', then boots
https://bugs.launchpad.net/bugs/396564
You received this bug notification because you are a member of
If I delete a file via GUI in krusader it won't disappear from view,
even after refresh via Ctrl+r. Opening a console via F2 confirms that
the file was indeed deleted. I have to change into the parent folder of
the folder in question and back to get a view without the deleted file.
Ubuntu 9.04 64
Krusader version info:
Version 2.0.0 Mars Pathfinder
Unter KDE 4.2.2 (KDE 4.2.2)
--
file attributes (i.e. size) not refreshing as needed
https://bugs.launchpad.net/bugs/302335
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
I followed the hint from Andy and was able to reproduce the behaviour.
With activated Show position of pointer when the Control key is
pressed most of my shortcuts are ignored. Strangely, the custom-defined
STRG+ALT+T for the terminal works even then. If I de-select the cursor-
highlighting, all
I am rather confused. Turned on my ubuntu box yersterday to be told
there are some 92 update available. After starting the automatic update
there was a message Couldn't update all packages, this may due to a
pre-release version ... bla bla bla. I was offered a partial
update/upgrade, that didn't
The final test was to connect both drives again, but this time with the
Plextor as MA and the BenQ as SL on the same cable. Guess what---it
works! No error messages, both drives available for recording in
Brasero.
--
hdc: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
version.log shows:
Ubuntu 2.6.24-17.31-generic.
PS
Sorry about the double post. FF hung.
** Attachment added: uname-a.log
http://launchpadlibrarian.net/14751055/uname-a.log
--
hdc: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
** Attachment added: lspci-vvnn.log
http://launchpadlibrarian.net/14751018/lspci-vvnn.log
--
hdc: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
https://bugs.launchpad.net/bugs/223780
You received this bug notification because you are a member of Ubuntu
Bugs, which
** Attachment added: lspci-vvnn.log
http://launchpadlibrarian.net/14751017/lspci-vvnn.log
--
hdc: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
https://bugs.launchpad.net/bugs/223780
You received this bug notification because you are a member of Ubuntu
Bugs, which
Same problem for me with a BENQ DW-1620/Plextor 24/10/40A. I was not
able to install a clean 8.04 with the standard live cd (32 bit). the
text-based installer worked, with some funny messages concerning the
drive. now 8.04 is up and running, albeit with the following glitches:
Switching to the
I have to correct myself:
It's a BenQ DW1650, the Plextor's real name is PX-W2410TA.
It seems to me as if my box was affected by both Bug #182996 and this
one here, because the Plextor drive is now working. To summarize my
findings:
Plextor alone either as SLave or MAster: ok.
BenQ alone as MA:
** Attachment added: lspci-vvnn.log
http://launchpadlibrarian.net/14751704/lspci-vvnn.log
--
hdc: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
https://bugs.launchpad.net/bugs/223780
You received this bug notification because you are a member of Ubuntu
Bugs, which
** Attachment added: uname-a.log
http://launchpadlibrarian.net/14751711/uname-a.log
--
hdc: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
https://bugs.launchpad.net/bugs/223780
You received this bug notification because you are a member of Ubuntu
Bugs, which is
** Attachment added: version.log
http://launchpadlibrarian.net/14751726/version.log
--
hdc: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
https://bugs.launchpad.net/bugs/223780
You received this bug notification because you are a member of Ubuntu
Bugs, which is
I want to apologize for my post, as this problem is only valid on my
laptop, where I am experiencing Bug #217685 (seems to be an issue with
the keyboard of my laptop). My workstation accepts Ctrl+Alt+Del after a
single click in the vnc window, so logging on to a locked M$ box is no
problem at all.
Unfortunately, I cannot confirm this. I already used the final version
of the Hardy CD (from the day of release). The problems are still
present.
André
--
[Hardy] Some keyboard shortcuts do not wokr
https://bugs.launchpad.net/bugs/217685
You received this bug notification because you are a
It might be superfluous to post another one of these comments, so feel
free to beat me ;)! I ask for such a fundamental feature as well, as I
am currently unable to connect to my M$ machines via Vinagre. Thanks in
advance!
André
--
Can not send 'Ctrl+Alt+Del'
I have the same issues. Although I assigned different shortcut
combinations
Ctrl + Alt + O for Firefox
Ctrl + Shift + O for T-Bird
they won't work. Neither does Ctrl + Alt + L lock the screen. The
combination Ctrl + Alt + T to open a terminal does work though, as well
as Alt + F1 to access the
I just installed the Alpha 4 version of Hardy on a Fujitsu-Siemens
Lifebook E4010 featuring an Intel 855 GM chip. According to Synaptic I
am using the above-mentioned 2.2.0.90 driver release. The flickering is
still there. Since I was confused about the option modedebug true
mentioned by GSPR I
There was an update just minutes ago for the intel driver:
2:2.2.0.90-2ubuntu7 (hardy). This didn't fix the flickering (even after
reboot). Do I have to intall the Hardy 5 CD completely fresh or are the
changes incorporated into my system by simply updating?
--
Incorrect refresh rate probed from
There still seems to be an issue with the driver.
** Changed in: xserver-xorg-video-intel (Ubuntu)
Status: Fix Released = New
--
Incorrect refresh rate probed from bad BIOS tables in 855GM
https://bugs.launchpad.net/bugs/157213
You received this bug notification because you are a member
Although there's no announcment about Alpha 5 yet, this morning the
update manager asked me whether I wanted to upgrade or not. Is there a
way to which version actually is on my laptop now? By the way, the
flickering doesn't want to go away. Intel driver is still version
2:2.2.0.90-2ubuntu7
You recommend waiting for the Alpha 5? Okay. Should be released today,
right (22nd)? What information do you guys need in case it still refuses
to work flawlessly?
--
Incorrect refresh rate probed from bad BIOS tables in 855GM
https://bugs.launchpad.net/bugs/157213
You received this bug
How shall I continue? It really makes me sad that the stupid 855GM chip
isn't supported properly. Is it sensible to keep up this bug report or
is it better to talk with the guys from the x driver development?
--
Incorrect refresh rate probed from bad BIOS tables in 855GM
I am sorry about the dumb question: what do you mean with upstream? The
underlying project, i.e. the developers of the driver/xorg? I'm still
new to this bug reporting business.
--
Incorrect refresh rate probed from bad BIOS tables in 855GM
https://bugs.launchpad.net/bugs/157213
You received
Thank you very much, I will do that!
--
Incorrect refresh rate probed from bad BIOS tables in 855GM
https://bugs.launchpad.net/bugs/157213
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
I am delighted to inform you that the flickering finally vanished for
me. The upgrade from today did the trick. Thank you very much!
--
Incorrect refresh rate probed from bad BIOS tables in 855GM
https://bugs.launchpad.net/bugs/157213
You received this bug notification because you are a member
Public bug reported:
In Feisty Herd 5 launch of firestarter, gajim or glipper does not result
in symbols in the panel. Applications are running though (according to
top). Furthermore, Firefox cannot be launched by keyboard shortcut
(defined as STRG+ALT+o). In Thunderbird, messeage refuse to be
59 matches
Mail list logo
