@ bryan
for many cases like mine huwaie ec168c its a case of network manager.
--
Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update
related)
https://bugs.launchpad.net/bugs/446146
You received this bug notification because you are a member of Ubuntu
Bugs, which is
@ Bryan Quigley I believe not. It's the way karmic recognizes the usb
device. As a standard device or as a usb dongle
--
Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update
related)
https://bugs.launchpad.net/bugs/446146
You received this bug notification because you
I believe this bug is actually fixed, however many many bugs were marked
incorrectly as duplicate. If it works using gnome-ppp like my ec 1260,
and doesn't work through network/modem manager, that means it's a bug in
network/modem manager... right?
--
Several Huawei USB dongle don't work with
Here's another thread in the Ubuntu forums relating to this bug
http://ubuntuforums.org/showthread.php?p=8525264#post8525264
Post # 9 may be of significance...
--
Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update
related)
https://bugs.launchpad.net/bugs/446146
Just found a workaround... worked 3 out of 3 times which is a much better
record than before.
Here's what I did.
Booted Ubuntu with the modem plugged in.
Right Clicked the icon representing my modem on the desktop (because nautilius
mounted it as a storage device) and clicked eject.
Then, I
@ mahela00 I think with the temp fix i found I found you don't have to wait 15
to 30 min. I just have to connect E220 and run
watch -n1 sudo rmmod usb-storage.
So far it's working like a charm.
--
Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update
related)
12 - 30 seconds.. not minutes... I'll check out your fix..
--
Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update
related)
https://bugs.launchpad.net/bugs/446146
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Thanks.. But I just bought this modem and I'm not very proficient with
this stuff. I forgot to mention my kernel version in post #377. Its
2.6.31-14-generic.
--
Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update
related)
https://bugs.launchpad.net/bugs/446146
You
Hello,
i am using Huwei E220 and had the same problem when upgrading to Keramic.
The linux-headers-2.6.31-16_2.6.31-16.50lp446146apw10_all.deb solved my
problem, worked flawlessly.
some time ago i got the update message for kernel 2.6.31-16. (think 55).
Installed and error came back.
Why is
@mahela00:
The Bug reported here should be fixed since kernel-2.6.31-15.49, as noticed in
the ubuntu changelog:
-
linux (2.6.31-15.49) karmic-proposed; urgency=low
[ Benjamin Herrenschmidt ]
* [Upstream] (drop after 2.6.31) usb-storage:
it still not working with updated kernel .
It work with network manager 0.7.1 stoped with 0.8 .
Mine is huwei ec168c.
** Changed in: linux (Ubuntu Karmic)
Status: Fix Committed = Incomplete
--
Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update
related)
** Changed in: linux (Ubuntu Karmic)
Status: Incomplete = Fix Committed
--
Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update
related)
https://bugs.launchpad.net/bugs/446146
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Confirm: stock kernel 2.6.31-16.53 does not fix the issue for (my)
Huawei E270.
A custom kernel that includes the patch
diff --git a/drivers/usb/storage/initializers.c
b/drivers/usb/storage/initializers.c
index 105d900..ec17c96 100644
--- a/drivers/usb/storage/initializers.c
+++
Just to confirm that this bug / issue affects me as well on karmic. I use the
Huawei E156G modem. Didn't seem to have any problems on Ubuntu 8.10 live CD.
As good as all the fixes listed in the comments are, they are not suitable for
the normal end user , especially one who has just migrated
@mahela00 - You may be interested in comment #288
--
Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update
related)
https://bugs.launchpad.net/bugs/446146
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
@ Michael Rüttgers Yes but it makes it work, and what I need until it's
fixed. So far it was the only temp fix that worked for me.
--
Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update
related)
https://bugs.launchpad.net/bugs/446146
You received this bug notification
@Jose:
After some further investigation, I now have a working E1762-Modem using kernel
2.6.31-16-server (Karmic).
This seems to work without using the quirks-parameter for me.
Maybe udev calls usb_modeswitch early enough to be able to switch the device
into proper mode, but I'm not sure about
In addition to my previous post:
I had the wrong bookmark for the network-manager related bug.
This is the correct one, but using trunk builds does still fix the problem:
https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/411724
--
Several Huawei USB dongle don't work with kernel
Bruno wrote:
watch -n1 sudo rmmod usb-storage
In recent kernel versions you could also try to use the usb_storage
module parameter quirks:
sudo rmmod usb_storage sudo modprobe usb_storage quirks=12d1:1446:i
This prevents just your Huawei Modem from beeing detected as a storage
device (in my
Thanks! Without the quirks parameter for usb_storage, and with the trunk
network manager, I managed to connect automatically using kubuntu karmic
at last! Maybe it is time to open a new bug for modem-modeswitc now?
--
Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update
@Michael: your quirks suggestion is not enough (unfortunately) for my
E1692 (which has the same productid as your E1762 - 0x1446). modem-
modeswitc doesn't seem able to switch it into proper mode, the
porductID stays at 0x1446 instead of changing to 0x140C, as it does when
I use Huawei's tools.
These are the erros I get after trying to connect
** Attachment added: pic.png
http://launchpadlibrarian.net/36734420/pic.png
--
Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update
related)
https://bugs.launchpad.net/bugs/446146
You received this bug notification
I found this temp fix
Run the following command at the console, prior to plugging in the modem to the
USB slot;
watch -n1 sudo rmmod usb-storage
This would remove the usb_storage module, and would make the device not
detected as a USB storage device. From here I can connect to the
internet
Can anyone still having problems with an E220/E270 please try the
2.6.31-17.54 kernel in Karmic-proposed. It pulls in the Linux 2.6.31.6
kernel from upstream, which contains a patch with the following
description:
commit e4613c5f3a957475b1f5b011e7833cc2b57b6ed4
Author: Ronnie Furuskog rofu7 at
br...@bruno-laptop:~$ uname -a
Linux bruno-laptop 2.6.31-17-generic #54-Ubuntu SMP Thu Dec 10 16:20:31 UTC
2009 i686 GNU/Linux
br...@bruno-laptop:~$ lsusb
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device
As soon as karmic detects E220 I try to connect and it just unmounts.
Then mounts again and so on...
--
Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update
related)
https://bugs.launchpad.net/bugs/446146
You received this bug notification because you are a member of
Latest kernel (2.6.31-17-generic #54-Ubuntu SMP Thu Dec 10 16:20:31 UTC
2009 i686 GNU/Linux) seems to make no improvement to the reliability of
connection with my e169. I get maybe 40-50% first-time connections.
But I did find the information on this helpful
** Changed in: linux (Ubuntu)
Status: Fix Released = Fix Committed
--
Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update
related)
https://bugs.launchpad.net/bugs/446146
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Removing the Huawei udev rules, and running modem-modeswic by hand, this
is what I get with today's 2.6.31-16 (#53):
sudo /lib/udev/modem-modeswitch -v 0x12d1 -p 0x1446 -t option-zerocd -d
D: Found mass storage device:
D: Endpoints: 2
D: Class: 0x8
D: SubClass: 0x6
D: Protocol: 0x50
Phuah Yee Keat, thank you very much, it worked, although there is a
remaining problem discussed below which does not prevent it from working
now.
madbiologist, I very respectfully disagree that it is a new bug, it
seems to be a regression caused by this bug fix, because it did work
correctly some
One more thing, the contents of vmc.cfg:
[profile]
last_device = 4817/4097/K3520
updater =
name = HuaweiK3520-3Gpreferred
[sms]
validity = maximum
[preferences]
exit_without_confirmation = no
close_minimizes = no
max_traffic = 10
mail = xdg-email
traffic_threshold = 10
usage_notification = no
Accepted linux into karmic-proposed, the package will build now and be
available in a few hours. Please test and give feedback here. See
https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to
enable and use -proposed. Thank you in advance!
** Changed in: linux (Ubuntu Karmic)
@ Bartosz no luck with the workaround you suggested. Even with todays
update still the same
--
Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update
related)
https://bugs.launchpad.net/bugs/446146
You received this bug notification because you are a member of Ubuntu
plz try the latest kernel from
http://kernel.ubuntu.com/~kernel-ppa/mainline/v2.6.32/
and then tell if it works or not and also try it at your own risk.
--
Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update
related)
https://bugs.launchpad.net/bugs/446146
You
Unfortunately the latest fix has broken vodafone-mobile-connect, which
now fails to run if the E620 is plugged in, just showing on the taskbar
for a few seconds and then exiting. With the E620 plugged in, network
manager can make a connection, but I really need vmc as it allows usage
monitoring,
Additionally, I tried with either wicd or network manager installed,
that makes no difference to the problem with vmc. I prefer wicd, but for
testing in a basic configuration, network manager is probably best as it
is what most people use by default.
--
Several Huawei USB dongle don't work with
Got some information which may help to debug this. I ran vmc from the
terminal, not the GUI, and captured the stderr output to a file,
attached.
** Attachment added: vodalog
http://launchpadlibrarian.net/36621084/vodalog
--
Several Huawei USB dongle don't work with kernel 2.6.31-12.40
I should add that with the dongle out, and the GUI working as normally
as it can, there is no output at all to stderr.
--
Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update
related)
https://bugs.launchpad.net/bugs/446146
You received this bug notification because you
The very latest kernel 2.6.32-020632-generic #020632 SMP Thu Dec 3
10:09:58 UTC 2009 x86_64 GNU/Linux makes no difference.
--
Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update
related)
https://bugs.launchpad.net/bugs/446146
You received this bug notification because
I have also posted this to Betavine as it may, although unlikely, be a
problem with VMC.
--
Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update
related)
https://bugs.launchpad.net/bugs/446146
You received this bug notification because you are a member of Ubuntu
Bugs,
Not only Vodafone Mobile Connect, but now Alice Modem Manager (a branded
version of Huawei's software) is no longer able to connect. I still need it to
switch the key into modem mode (from productId 1446 to 140C), but then have to
dial using Kppp, and lose the connection management features.
tiger99, try removing your ~/.vmc2, it worked for me.
After I did the kernel upgrade, vmc always either quits automatically,
or nothing happens when I click Connect, it took me a long while to
realize its configuration problem. After I removed .vmc2, and
reconfigure the APN, I am using it now. :)
@tiger99 - The issue you describe in comment #346 is a completely
different issue to this bug. You need to file a new bug. This bug is
fixed, and the fix has been released.
Also, when filing the new bug, please attach the output of lsusb and be
more specific about which latest fix broke
@ Jose Bernardo - that's a different bug. Please file a new bug, or try
Phuah Yee Keat's fix.
--
Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update
related)
https://bugs.launchpad.net/bugs/446146
You received this bug notification because you are a member of Ubuntu
Ok, 2.16.31-16 breaking Huawei's branded connection utilities is a different
bug. But this one isn't fixed! At least for some of our Huawei usb keys! For my
E1692, which worked perfectly in 2.6.28, it still isn't fixed - read the
comments I've left before, I can't use it as is with karmic, I
Ah, and I've already done a firmware update. Not the one from Phuah Yee
Keat (my modem is different), but one from a german site - the E169
firmware applies for my E1692 too, even if the productID is different
(and stays different after the upgrade). Surprise - the firmware update
changed nothing
How I made my E220 works.
-Upgrade firmware
-sudo rmmod usb_storage
-sudo modprobe usbserial
-Delete old 3g connection
-Make a new one
--
Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update
related)
https://bugs.launchpad.net/bugs/446146
You received this bug
@madbiologist - I don't think the officials releases new Ubuntu
versions with the intention not to compete with Win? It's not hard to
understand that various tech/review/media sites, as well as leading
computer magazines, will assume that the latest Ubuntu release is the
competitor to the latest
@madbiologist - here you have a bug report about Microsoft market share.
It is connected with MS windows. So don't tell me that Windows don't
compete with Ubuntu.
https://bugs.launchpad.net/ubuntu/+bug/1
--
Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update
related)
** Changed in: linux (Ubuntu)
Status: Fix Committed = Fix Released
--
Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update
related)
https://bugs.launchpad.net/bugs/446146
You received this bug notification because you are a member of Ubuntu
Bugs, which is
for me same like in post from Bruno #325. Still disconnecting with my
E220 using Ubuntu Karmic Koala
--
Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update
related)
https://bugs.launchpad.net/bugs/446146
You received this bug notification because you are a member of
I have huawei EC168C. ( was directed to this post, my bug was marked dublicate)
Its still not working .:-(
But surprisingly works with Gnome-ppp.:-)
If you like any detail i can post.
For starter : syslog shows this:
Dec 8 19:36:48 animesh-laptop modem-manager: (ttyUSB0) opening serial
IT writes prepering internet connection and stops
It was working with 9.04.
I have tried almost all the kernel updates and network manager trunk
build without much reprise . help needed thanks.
--
Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update
related)
lsusb detects as :
Bus 005 Device 005: ID 12d1:1412 Huawei Technologies Co., Ltd.
Any other information ill happily provide.
This will be a problem with all reliance network connection here in india.
A friend of mine also reports the same.
Model : huawei EC168C
With the latest updates E220 stopped working again.
lsusb stated the following
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID
It's very unstable. Sometimes I'm able to connect, sometimes it's just keeps on
mounting and unmounting, and sometimes I'm able to connect and just after that
it unmounts.
I can't just keep my fingers crossed hoping it does not unmount, like yesterday
the connection was stablen.
--
Several
Don't know exactly what I did but finally it's working. Karmic is not
recognizing the E220 (shows up on desktop). Lets hope tomorrow it's
still working without having to plugin plugout endlessly.
--
Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update
related)
I meant karmic is now recognizing the E220
--
Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update
related)
https://bugs.launchpad.net/bugs/446146
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
The problem persist for me (#285) even with the latest karmic proposed.
This bug is definitely not solved! As I wrote before I am happy to send
some logs if you specify what is needed. Long time without internet
access at home...
--
Several Huawei USB dongle don't work with kernel 2.6.31-12.40
@Martin
Try to remove existing internet connection, and add a new one.
Try also another mobile internet connection program.
--
Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update
related)
https://bugs.launchpad.net/bugs/446146
You received this bug notification
Some workaround:
http://tech.firdooze.com/2009/11/09/work-around-for-ubuntu-910-karmic-koala-huawei-modem-problem/
--
Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update
related)
https://bugs.launchpad.net/bugs/446146
You received this bug notification because you are
Please try application Gnome-ppp and try if it connect:
http://packages.ubuntu.com/karmic/gnome-ppp
--
Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update
related)
https://bugs.launchpad.net/bugs/446146
You received this bug notification because you are a member of
After installing the 2.6.31.16 the E220 still does not work. Keeps on mounting
and unmounting
br...@bruno-laptop:~$ sudo tail -f /var/log/syslog
[sudo] password for bruno:
Dec 7 11:28:09 bruno-laptop wpa_supplicant[1157]: CTRL-EVENT-SCAN-RESULTS
Dec 7 11:28:09 bruno-laptop
My E160E is running perfectly with the kernel from karmic-updates.
My broadband provider released some firmware upgrades as well, those of you
whose modem are not working can give it a try:
http://www.digi.com.my/internet/broadband/userguide.html
--
Several Huawei USB dongle don't work with
@ktalinu It's working, but sometimes disconnects with no apparent
reason, but at least now it connects and I'm able to surf the net
--
Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update
related)
https://bugs.launchpad.net/bugs/446146
You received this bug
With the lastest 2.6.31-16.52 my e169 is not working again, same -108
error.
--
Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update
related)
https://bugs.launchpad.net/bugs/446146
You received this bug notification because you are a member of Ubuntu
Bugs, which is
9.10 feels more and more like one step forward and two steps back.
Supposedly being the version to compete with Win7, these never ending
network/modem/kernel bugs has got catastrophic proportions.
The problem is that most people do not post bug reports. Since they lost
internet conectivity,
I know that this post is about Huawei USB dongle only, but as I read
Richard Wikberg's post, I must agree with him. My ONDA modem MSA501HS
still not working with 9.10 (it works fine in 9.04), and my USB
connections seems strange in my desktop computer (where I installed
Karmic). It says that I
I need to say something positive here: There have been two kernel updates in
Karmic since release as far as I noticed.
Already the first kernel update solved my remaining mobile internet issues. I
completely agree that especially a bug in Internet connection is an extremely
serious one, but: In
** Tags added: karmic
--
Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update
related)
https://bugs.launchpad.net/bugs/446146
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
I upgraded today from 2.6.31-15.50 to 2.6.31-16.52 and my E169 stop
working. My connection no longer appear in network-manager list. :-(
--
Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update
related)
https://bugs.launchpad.net/bugs/446146
You received this bug
Sorry for the last post. After I reboot in 2.6.31-15 and again in
2.6.31.16 is working. Let's see after another reboot :-)
--
Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update
related)
https://bugs.launchpad.net/bugs/446146
You received this bug notification
With the backports kernel, and the E1692 (productID 1446, switches to
140C when in modem mode), it still doesn't work. I have to install the
TIM Italy provided software and udev rules, and disable the detection in
/lib/udev/rules.d/61-option-modem-modeswitch.rules to be able to use
the modem.
--
I can use my E169 mobile Internet again after the kernel update – thank
you for the fix dear Linux and Ubuntu developers!
However, my experience is that this feature does not run as smooth as in 9.04
and I would like to ask if anyone else have the same feeling. There are three
areas where I
Carl, I have the same issues of unreliable connections, even with
2.6.31-15.50 and E169 -- NM icons spins then fails to connects, this can
happen several times before the network is established, but always
happens at least once after a reboot (see post #73 for kernel
developer's similar
I believe the 19d2 (ZTE) entry in /lib/udev/rules.d/61-option-modem-
modeswitch.rules is interfering with the device's normal modeswitch and
usb_storage recognition. That entry was added to udev incorrectly and
has since been reverted when it was found to cause problems. If people
ahve problems
Sadly, after persisting with Network Manager's inconsistent connections,
I am taking Tiger99's advice (post #217) and using Betavine and wicd to
get reliable, first-time connection.
I say sadly, because I want Ubuntu to work ootb. But this has been an up
c**k from the beta version of Karmic.
i suggest that if any one is still having this bug can they plz try to
install a later kernel by their self and see if that change the
situation plz.
--
Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update
related)
https://bugs.launchpad.net/bugs/446146
You received
Resultsfor my Vodafone Germany branded Huawei E270.
2.6.31-15.50 - no joy GSM modem converter disconnects leaving E270 in a
confused state.Strangely unplugging and replugging works.
'apw5' - as for 15.50
'apw10' - Hurray this one works perfectly.
--
Several Huawei USB dongle don't work with
I've decided to name this distribution, 9.10, the 9-out-of-10. Many
things seem to work so far (haven't tested them all yet, I can tell some
of the buttons seem not to respond, but it goes beyond this Bug report).
Anyway, here's my report with a Vodafone Portugal equipment.
- Netbook: Eee PC
On my HSDPA USB stick the model number is Huawei K3520.
From Linux it looks like an E620 USB modem:
Bus 003 Device 003: ID 12d1:1001 Huawei Technologies Co., Ltd. E620 USB
Modem
Linux kernel 2.6.31-15.50
Now my USB stick works as a charm. I can connect to the internet anytime
anywhere without
Hmm. No joy with 2.6.31.15 either with E220. In fact a whole bunch of
bugs...
* I have the disconnects almost immediately, after connection initiaetd
from network manger behavior.
* I also have a mode where the E220 light goes out completely, and the
device disappears from lsusb. This seems to
I still have issues with my E169 (which shows up as E620 with lsusb)
after kernel update.
The modem is recognized at startup, but I can't connect to anything. I
see my ISP, am able to click it, and nothing more.
After unplugging/plugging it back in I am able to connect, but have to
click on my
now working well with kernel 2.6.31.15.
thanks
--
Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update
related)
https://bugs.launchpad.net/bugs/446146
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
Old kernel 2.6.31-14 did not work for me (was mounting as a CD ROM / USB
memory stick only)
After aptitude update / upgrade today (26 Nov 2009).
New Kernel 2.6.31-15
Works fine, all as it was before in 9.04.
device id is 12d1:1001 Huawei E620 USB Modem
Thanks - fixed for me !
--
Several
My E169 work now with 2.6.31-15-50 kernel. Tested on two machines with
Karmic fresh install. You must delete the old connection and create new
one.
--
Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update
related)
https://bugs.launchpad.net/bugs/446146
You received this
Even here everything fine with my E160G that shows up as E220/E270 in lsusb.
I even think that it is now faster - but this can be due to the fact that I did
now use the address only and manually entered the DNS.
And I also created a new mobile broadband entry (even for my last tests I wrote
Update Manager popped up yesterday with several updates, kernel update included.
My E620 now works like it should. Thanks!
--
Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update
related)
https://bugs.launchpad.net/bugs/446146
You received this bug notification because
Just curious; for me it still does not work with the latest kernel
(2.6.31-15-generic) and e169. Is this considered confirmed behaviour,
and if so, should the status not be changed from fix commited to
something else?. Or should I file this bug somewhere else? Are there any
e169 users for whom it
With the last update some of the cards that I have around work better
now (E620, E272, K3520). Having said that, my E870 still does not work
(option_instat_callback: error -108 all over dmesg) and my E220 shows
an erratic behaviour, it mostly works, but from time to time a popup
complaining that
Also for me it doesn't work with a E1692 (product id 1446 before switch,
140c after). I can only get it to work if I edit /lib/udev/rules.d/61
-option-modem-modeswitch.rules and comment out the line supposed to
detect this model, and then install TIM Italy's branded Huawei Modem
Manager, that came
I updated the firmware of my e156g dongle...STILL NOT WORKING
Then I updated the kernel to 2.6.31-15.50STILL NOT WORKING
--
Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update
related)
https://bugs.launchpad.net/bugs/446146
You received this bug notification
2.6.31-15.50 is now in the real karmic-updates.
--
Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update
related)
https://bugs.launchpad.net/bugs/446146
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
lsusb reports my E169 HSDPA usb stick as:
ID 12d1:1001 Huawei Technologies Co., Ltd. E620 USB Modem.
using 2.6.31-15.50 it now shows up in network manager as:
Huawei (what's with the ÿ?)
But refuses to connect to the service provider...
--
Several Huawei USB dongle don't
Hi.
It works for Hauwei E220.
Thanks.
Don't forget about removing old mobile connection and create the new
one.
--
Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update
related)
https://bugs.launchpad.net/bugs/446146
You received this bug notification because you are a
This bug was fixed in the package linux - 2.6.31-15.50
---
linux (2.6.31-15.50) karmic-proposed; urgency=low
[ Kees Cook ]
* SAUCE: Fix nx_enable reporting
- LP: #454285
linux (2.6.31-15.49) karmic-proposed; urgency=low
[ Benjamin Herrenschmidt ]
* [Upstream] (drop
Hi all.
No luck here with a Huawei E156G. Today I've installed 2.6.31-15.50 from
proposed, and I could connect 1 of 20 attemps. Others dmesg says
option: option_instat_callback: error -108.
In all cases, I have to umount cdrom with Windows driver.
I can add some logs if needed.
E156G is
Have to revoke my #284 comment. It's not working stable. In 8 of 10
times it stil fails. UMTS ist critical on Netbooks. I could help my
friend around this bug in Ubuntu by installing Mobile-Connect from
Betavine (vodafone) which works with all mobile networks. The package
can be downloaded from
I agree with Richard in #290 In Jaunty all these modems JFW without
installing anything. It was awesome I demonstrated to several people
showing the E169 working on the live disk. It should JFW with Karmic.
--
Several Huawei USB dongle don't work with kernel 2.6.31-12.40 (2.6.31.1 update
In regards to comment #291. I actually have found the e169 to work.
Yesterday after I upgraded to 2.6.31-15. I was so shocked as I had
tested it after the upgrade and a couple of boots. My friend just
plugged it in and it worked. It got a bad connection and I reconnected
it. It worked. Then
101 - 200 of 354 matches
Mail list logo