It seems that Ubuntu 20.04.4 gets stuck at the same step with the same
traces appearing in the kernel log. Since the installer uses the same
kernel (5.13) it likely is caused by that kernel version. Ubuntu 22.04
(nightly as of 20220301, which seems to come with 5.15) seems to work
fine here.
--
** Changed in: linux (Ubuntu)
Status: Expired => New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1946507
Title:
Ubuntu Install Setup Freeze
To manage notifications about this bug go to:
Similar hang on a T440s trying to install Ubuntu 21.10. The system
currently has a fresh Windows 11 copy on half of its SSD hard drive. It
seems that ntfsresize causes the kernel to hang. Trying to install
Ubuntu gets stuck in Step 4. Install logs attached.
Hardware wise, the system seems to work
As the log actually states, the problem was that another instance of
mysqld was using the port:
Can't start server: Bind on TCP/IP port: Address already in use
I am still leaving this issue open as the appamore DENIED operation
might be something which should be fixed in the apparmor profile.
Public bug reported:
It seems that mysqld tries to access /proc/sys/kernel/random/boot_id and
is not allowed to:
May 18 20:56:21 quak kernel: [555114.509781] audit: type=1400
audit(1589828181.471:518548): apparmor="DENIED" operation="open"
profile="/usr/sbin/mysqld"
Observed the same issue on Ubuntu 16.04.4 with a Dell R440 and a RAID 5
consisting of 3 10k SAS disks. Using 16.04+UCA-Pike resolved the issue
just fine.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
** Attachment added: syslog-tftp-hpa-net-device-up.txt
https://bugs.launchpad.net/ubuntu/+source/tftp-hpa/+bug/1342580/+attachment/4292436/+files/syslog-tftp-hpa-net-device-up.txt
--
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to
The proposed fix (from #1 as well as the corrected version from #5) does
not solve the problem for me. Actually, when I look at what time the
system tries to start the tftp-hpa process, it makes it even worse: The
process gets started earlier (around ~11s vs ~13s)! Also, the relevant
errors look
** Attachment added: syslog-tftp-hpa-net-device-up.txt
https://bugs.launchpad.net/ubuntu/+source/tftp-hpa/+bug/1342580/+attachment/4292436/+files/syslog-tftp-hpa-net-device-up.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
The proposed fix (from #1 as well as the corrected version from #5) does
not solve the problem for me. Actually, when I look at what time the
system tries to start the tftp-hpa process, it makes it even worse: The
process gets started earlier (around ~11s vs ~13s)! Also, the relevant
errors look
A workaround for my case was to bind to the IPv4 address explicitly:
In /etc/default/tftpd-hpa:
TFTP_ADDRESS=0.0.0.0:69
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1342580
Title:
tftpd-hpa
The Kernel installed in our environment is compiled using GCC 4.8.2
(check dmesg | head). Hence I don't think this is related.
We had the kernel panic again last week (see attachment). We added the
hpwdt module to blacklist, which hopefully works around this problem. We
also updated the BIOS, but
We see this or a similar issue on a DL360 G7. As visible in the stack
trace, we are using VirtualBox. However, I think this is not related
since we used the same version on a earlier Kernel. We also upgraded to
latest VirtualBox version after the last crash, however the system
crashed again since
Public bug reported:
On a server system, I have a r8169 compatible network device running.
After getting this kernel warning, communication is not possible
anymore.
[ 236.943931] [ cut here ]
[ 236.943947] WARNING: CPU: 0 PID: 0 at
For me, this workaround worked.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1132700
Title:
gnome-terminal requires sourcing of vte.sh login script
To manage notifications about this bug go to:
I could resolve this issue with a Intel SSD X25-M 80GB by upateing the
firmware (used to be 2CV102HD, now I have 2CV102M3).
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/991040
Title:
COMRESET
*** This bug is a duplicate of bug 1167622 ***
https://bugs.launchpad.net/bugs/1167622
I can confirm this bug too under raring. I'm using a HP EliteBook 8530w,
I'm absolutly sure the command used to work in quantal... I've the
set_variable failed in dmesg and No space left on device:
*** This bug is a duplicate of bug 1167622 ***
https://bugs.launchpad.net/bugs/1167622
Just tested latest upstream, it still doesn't work, however, the strace
looks a bit different:
open(/sys/firmware/efi/vars/BootOrder-8be4df61-93ca-11d2-aa0d-00e098032b8c/raw_var,
O_WRONLY) = 3
write(3,
On my Samsung Series 9 device I do have the exactly same behavior.
I documented this in my blog post:
http://falstaff.agner.ch/2012/12/18/ubuntu-12-10-and-windows-8-with-secure-boot-mode/
However, I observed that my original Windows Boot Manager has a slightly
different file path:
Boot0008*
I made a script which creates working boot entries for Windows 7/8 as
long as the EFI system partition is mounted at /boot/efi (which normally
happens):
https://gist.github.com/4330598
Use it like this:
$ wget
After installing Ubuntu 12.10 on a system with a ATI Radeon HD 4650
(RV730) I had no sound over HDMI. The HDMI adapter wasn't in the list
of chooseable output devices for Pulseaudio (Sound configuration), so
this works correctly for 12.10.
The mentioned parameter radeon.audio=1 added the entry
@44, this doesn't solve the problem for me
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/842566
Title:
Libreoffice and unity integration broken.
To manage notifications about this bug go to:
This still happens to me as soon as an User is logged in. It has a nasty
side effect in munin, which tries to get harddisk usage using df. df's
return value in that case is not 0, so the result is not being
processed. While it's possible to fix that in munin, its nevertheless a
bit strange that df
Still there with Ubuntu 11.10 Beta 1. I also use the NVidia binary
driver, might it be driver related?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/810285
Title:
Unity launcher displays in
This Bug still exists on Lucid Lynx (10.04.2 LTS), amd64
[Jun 28 09:52:29] WARNING[24307] loader.c: Module 'format_mp3.so' was not
compiled with the same compile-time options as this version of Asterisk.
[Jun 28 09:52:29] WARNING[24307] loader.c: Module 'format_mp3.so' will not be
initialized as
I get the same on my HP EliteBook 8530w. I've the feeling it gets
triggered mainly if the CPU is under high load.
--
WARNING: at /build/buildd/linux-2.6.32/net/mac80211/agg-tx.c:150
___ieee80211_stop_tx_ba_session 0x82/0x90 [mac80211]()
https://bugs.launchpad.net/bugs/539733
You received this
I can confirm this bug on karmic. As far as I see the things its also in
lucid (same version according to packages.ubuntu.com), so it would be
nice if it gets fixed in lucid at least (which will be a LTS release)
--
chntpw fails on x86_64
https://bugs.launchpad.net/bugs/293809
You received this
hyla.conf has the right path nowadays, but still I get an error:
$ sendfax -n -d 0764203538 /etc/issue.net
textfmt: No font metric information found for Courier-Bold.
Usage: textfmt [-1] [-2] [-B] [-c] [-D] [-f fontname] [-F fontdir(s)] [-m N]
[-o #] [-p #] [-r] [-U] [-Ml=#,r=#,t=#,b=#] [-V #]
*** This bug is a duplicate of bug 360818 ***
https://bugs.launchpad.net/bugs/360818
I experience this problem too, and its getting really anying. Therefor I
started to debug this problem by myself. If have no idea of
NetworkManager by grepping through the source I found out that the
message
I first posted this accidently to a duplicate of this bug...
I experience this problem too, and its getting really anying. Therefor I
started to debug this problem by myself. If have no idea of
NetworkManager by grepping through the source I found out that the
message is generated from
Oops, sorry, that was not intended... Again an strace...
$ time strace net usershare info 2 strace-info.txt
real1m24.015s
user0m0.030s
sys 0m0.030s
strace-info.txt is attached. It hangs at the same line as list does...
$ hostname -f
alpha
hosts and resolv.conf is attached... I
** Attachment added: hosts
http://launchpadlibrarian.net/35569828/hosts
--
net usershare info takes too long (was: Nautilus hangs from time to time)
https://bugs.launchpad.net/bugs/479614
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed
I asked myself why it has two times the same nameserver in this list.
Its because im connected two times to that network, over wireless and
ethernet. When I disable one connection, one nameserver disappears.
Nevertheless the problem persists...
** Attachment added: resolv.conf
,
but I did not experienced such hangs. I discovered that starting the
samba daemon also takes a long time...
Bye
falstaff
** Attachment added: nsswitch.conf
http://launchpadlibrarian.net/35576626/nsswitch.conf
--
net usershare info takes too long (was: Nautilus hangs from time to time)
https
I found out what was wrong:
I copied the smb.conf from my old setup, where I used KVM and had
several vnet's. This line in smb.conf allowed me to share files only
with my virtual machines:
interfaces = 127.0.0.0/8 vnet0 vnet1 vnet2
I did not setup kvm that way again, therefor I had no
I have this problem too. I have a karmic host and a karmic client. I
connect over ssh to the server. The server has br0 configured as bridge.
But I don't get the Shared physical devices listed in the GUI.
I edited the config files of the domain directly and added theses lines:
interface
Oops, sorry, that was not intended... Again an strace...
$ time strace net usershare info 2 strace-info.txt
real1m24.015s
user0m0.030s
sys 0m0.030s
strace-info.txt is attached. It hangs at the same line as list does...
$ hostname -f
alpha
hosts and resolv.conf is attached... I
** Attachment added: hosts
http://launchpadlibrarian.net/35569828/hosts
--
net usershare info takes too long (was: Nautilus hangs from time to time)
https://bugs.launchpad.net/bugs/479614
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
I asked myself why it has two times the same nameserver in this list.
Its because im connected two times to that network, over wireless and
ethernet. When I disable one connection, one nameserver disappears.
Nevertheless the problem persists...
** Attachment added: resolv.conf
,
but I did not experienced such hangs. I discovered that starting the
samba daemon also takes a long time...
Bye
falstaff
** Attachment added: nsswitch.conf
http://launchpadlibrarian.net/35576626/nsswitch.conf
--
net usershare info takes too long (was: Nautilus hangs from time to time)
https
I found out what was wrong:
I copied the smb.conf from my old setup, where I used KVM and had
several vnet's. This line in smb.conf allowed me to share files only
with my virtual machines:
interfaces = 127.0.0.0/8 vnet0 vnet1 vnet2
I did not setup kvm that way again, therefor I had no
Hi,
My setup is a typical home setup, no domain server or something like
that, local user accounts. I have a D-Link DIR-855 Router at
192.168.220.1 which also acts as DHCP and DNS-Server (DNS-forwarding or
something like that). That router has also the ability to share an
attached USB-Harddisk
Hi,
My setup is a typical home setup, no domain server or something like
that, local user accounts. I have a D-Link DIR-855 Router at
192.168.220.1 which also acts as DHCP and DNS-Server (DNS-forwarding or
something like that). That router has also the ability to share an
attached USB-Harddisk
Thanks, I installed the package and did the same with gdb as I did when
I created Stacktrace.txt. As expected, the symbols helped to show the
called functions...
bye
falstaff
** Attachment added: gdb-nautilus-with-dbgsym.txt
http://launchpadlibrarian.net/35493277/gdb-nautilus-with-dbgsym.txt
In a first test it seems that the command is executed pretty fast:
$ time net usershare info
real0m0.206s
user0m0.000s
sys 0m0.020s
I will try again when i reboot my laptop (because then the hang always
happens)
--
Nautilus hangs from time to time
Yeah, after the reboot the command takes really long:
$ time net usershare info
real1m24.070s
user0m0.000s
sys 0m0.000s
I started the command again, and it tooks again very long...
--
Nautilus hangs from time to time
https://bugs.launchpad.net/bugs/479614
You received this bug
Public bug reported:
Binary package hint: nautilus
When I boot up my laptop and start Nautilus for the first time it always
hangs several seconds (~30 seconds). Then it often works for some
minutes, and suddenly (especally when i type letters to select a folder)
he hangs again. While nautilus
** Attachment added: Stacktrace
http://launchpadlibrarian.net/35441957/gdb-nautilus.txt
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/35441960/Dependencies.txt
** Attachment added: ProcMaps.txt
http://launchpadlibrarian.net/35441961/ProcMaps.txt
** Attachment
I could use ext2resize as a workaround. Its in a package called the
same, and not from the extX developer. It resizes ext2/3 filesystems
--
resize2fs: memory allocation failed while trying to resize
https://bugs.launchpad.net/bugs/455024
You received this bug notification because you are a
Public bug reported:
Binary package hint: cryptsetup
I tried to use cryptsetup in karmic with a encrypted file (via losetup).
Cryptsetup supports this kind of configuration, my /etc/crypttab line looks
like this:
# target name source device key file options
container
Public bug reported:
Binary package hint: e2fsprogs
When I try to resize a big EXT3 filesystem on a RAID5 (/dev/md0) from
5TB to 7TB i get this output:
# resize2fs -p /dev/md0
resize2fs 1.41.9 (22-Aug-2009)
Resizing the filesystem on /dev/md0 to 1709329888 (4k)
This is solved with the latest updates...
** Changed in: cryptsetup (Ubuntu)
Status: New = Invalid
--
Cryptsetup doesnt wait for password promopt at startup
https://bugs.launchpad.net/bugs/451676
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Public bug reported:
I installed cryptsetup and setup a new crypttab on Ubuntu Karmic. Then I
restarted and saw the password prompt. But Ubuntu continued booting and
showed Logon screen.
I think this is a problem because X starts so early nowadays...
** Affects: cryptsetup (Ubuntu)
, and sometimes for longer times,
sometimes only for a few seconds...
bye
falstaff
--
[karmic] Intel WiFi Link 5300 sometimes not working on 5 GHz
https://bugs.launchpad.net/bugs/420678
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu
** Attachment added: dmesg output befor the system freezed
http://launchpadlibrarian.net/25702181/oops.txt
--
BUG: soft lockup - CPU#0 stuck for 61s! [cupsd:3709]
https://bugs.launchpad.net/bugs/363368
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Public bug reported:
I updated to Jaunty when RC was released. Since then I had 3 total
freeze. Today I felt like something is wrong and looked in dmesg, which
is attached... After several seconds the system freezed again. I think
the freezes befor would have the same dmesg entries, but i missed
Today I get a new Kernel on Intrepid, SD-Cardreader works now under
Intrepid too, thanks!
$ uname -a
Linux alpha 2.6.27-14-generic #1 SMP Fri Mar 13 19:54:51 UTC 2009 x86_64
GNU/Linux
--
SD card insertion is not detected on HP EliteBook 6930p
https://bugs.launchpad.net/bugs/311932
You received
Today I get a new Kernel on Intrepid, the kernel boots now with Fan
always ON on AC Power enabled under Intrepid too!
$ uname -a
Linux alpha 2.6.27-14-generic #1 SMP Fri Mar 13 19:54:51 UTC 2009 x86_64
GNU/Linux
Thanks!
--
Kernel stops booting on HP EliteBook 8530w
I tested latest Ubuntu Jaunty, it works there...
--
SD card insertion is not detected on HP EliteBook 6930p
https://bugs.launchpad.net/bugs/311932
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
I enabled Proposed and installed the latest Kernel (2.6.27-13-generic).
But I think this Kernel doesn't include this fix yet, uname -a shows
that the Kernel was compiled in February...
$ uname -a
Linux alpha 2.6.27-13-generic #1 SMP Thu Feb 26 07:31:49 UTC 2009 x86_64
GNU/Linux
--
Kernel stops
I now found also an permanent workaround for me:
I deleted the picture which cases the crash and created a folder with the same
name:
mkdir 67a550b3ac05c2d900cfba688e9ccfe2a86d840d.png
Pidgin creates then the avatar with the name
67a550b3ac05c2d900cfba688e9ccfe2a86d840d.png.save. After that i
I can contribute some informations too:
I have a contact which has an avatar (XMPP). When I start pidgin the
above error happens. But when I delete this picture in .purple/icon/,
startup succeeds, and pidigin write the picture again (with the same
filename,
Hello,
I've a EliteBook 8530w which also has such a Ricoh SD-Card-Reader. I
tried the kernel (x86-64) on my Laptop and it works like a charm!
Thanks!
Bye
falstaff
** Attachment added: lspci -vvv on HP EliteBook 8530w
http://launchpadlibrarian.net/23576881/lspci.txt
--
SD card insertion
Hm, nostra's report might be not related, as far as I could see is the
SD-Card-Reader not from Ricoh... Altough, its a hp laptop too
The bug was fixed after 2.6.28 release, therefor sd card might not work
on jaunty too, im going to test it as soon as beta is avilable...
Bye
falstaff
--
SD
Drag and Drop with Nautilus ListView doesnt work for me too! Would be
nice if this bug gets fixed in Jaunty...
--
Drag n' Drop directories from File-Roller is somewhat tricky
https://bugs.launchpad.net/bugs/13199
You received this bug notification because you are a member of Ubuntu
Bugs, which
I tested it on my HP 8530w on Intrepid AMD64. It works with the new
kernel from the link above with BIOS option Fan always ON on AC Power
enabled!
--
Kernel stops booting on HP EliteBook 8530w
https://bugs.launchpad.net/bugs/288385
You received this bug notification because you are a member of
I've installed the latest Kernel from proposed, but it still doesnt work...
$ uname -a
Linux alpha 2.6.27-11-generic #1 SMP Fri Jan 23 13:58:13 UTC 2009 x86_64
GNU/Linux
Might be that its another bug on 8530w. Anyway, there are some other outputs
now in dmesg, this two lines doesnt appear
Hm, I read the comments on Kernel Bugzilla once again. As far as I
understand the Fan always on bug is solved by a patch which is only
applied to 2.6.29-rc1 (second last comment). So I think it isn't
included in 2.6.27.7! Can we apply this patch in 2.6.27-11 anyway?
Is already solved in 2.6.27.7, can we put this fix in Ubuntu too?
http://bugzilla.kernel.org/show_bug.cgi?id=11884
** Changed in: linux-meta (Ubuntu)
Assignee: (unassigned) = Ubuntu Kernel ACPI Team (ubuntu-kernel-acpi)
--
Kernel stops booting on HP EliteBook 8530w
I've the same error with Ubuntu 9.04 Alpha3. Im using VirtualBox...
--
[jaunty] Partman fails with exit code 141 when selecting custom option in
mythbuntu install
https://bugs.launchpad.net/bugs/318140
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Public bug reported:
When I start Pidgin, it crashes with this message:
Gtk:ERROR:/build/buildd/gtk+2.0-2.14.4/gtk/gtktreestore.c:531:gtk_tree_store_get_path:
assertion failed: (G_NODE (iter-user_data)-parent != NULL)
Aborted
I found a workaround somewhere, which always works, but only for one
Works for me too, thanks!
--
Network Manager fails to connect to a system stored network with
set_network_cb(): Couldn't set network config: Did not receive correct
message.. in intrepid
https://bugs.launchpad.net/bugs/288963
You received this bug notification because you are a member of
Hi StarShock,
Can you provide a deb package? So then I would test it on my machine
also...
--
Network Manager fails to connect to a system stored network with
set_network_cb(): Couldn't set network config: Did not receive correct
message.. in intrepid
https://bugs.launchpad.net/bugs/288963
Dana,
Did you tried it with the BIOS option Fan always ON on AC Power?
bye
falstaff
--
Kernel stops booting on HP EliteBook 8530w
https://bugs.launchpad.net/bugs/288385
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
I can confirm this problem... is annoying when you're working in a full
screen vnc session and want to send Alt+F4 to the guest. If somehow the
focus is still on the vinagre window, vinagre closes and saves this
fullscreen settings. When I start vinagre then, its always fullscreen
with this light
I have this problem also on my university campus, WPA EAP, we use PEAP
and MSCHAPv2 there. It worked fine under hardy, but now under intrepid
it works only sometimes... I have to reconnect again and again, till it
works, sometimes five minutes, sometimes twenty minutes...
And I use the new iwlagn
This seems to be solved in Intrepid Ibex...
--
Use lower resolution in preview mode with high-res (~2MP) cameras
https://bugs.launchpad.net/bugs/201508
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Here is what I've done:
1. Went into settings, insert the WEP-Key with the System Wide Setting on
2. Press OK, the connection works as expected...
3. Left-Klick on the NM Symbol and click on the wirless network = Disconnects
from the network, as expected...
4. Left-Klick again on the NM Symbol
** Attachment added: Syslog when its not working...
http://launchpadlibrarian.net/19251320/syslog_wep.txt
--
Network Manager fails to connect to a system stored network with
set_network_cb(): Couldn't set network config: Did not receive correct
message.. in intrepid
** Attachment added: Network Manager Applet output when it didnt worked (Step
4)
http://launchpadlibrarian.net/19251334/nmapplet.txt
--
Network Manager fails to connect to a system stored network with
set_network_cb(): Couldn't set network config: Did not receive correct
message.. in
I belive that there is something wrong with WEP-Key fetching over DBUS
from NM system service... That's why its working when I enter the key in
the settings, nm-applet don't have to fetch the key over DBUS. The Key
will be saved in the Settings file under /etc/NetworkManager/system-
Yes, it works without the system wide setting...
--
Network Manager fails to connect to a system stored network with
set_network_cb(): Couldn't set network config: Did not receive correct
message.. in intrepid
https://bugs.launchpad.net/bugs/288963
You received this bug notification because
A pretty simple workaround is available:
Disable the BIOS option Fan always ON on AC Power under System Config -
Device Config. With this option I could boot the system with latest Intrepid
Kernel
I found this here: http://www.linlap.com/wiki/HP+EliteBook+8530W, thanks
to freak42
--
I can confirm this using WEP Keys... NM is unusable when using System
wide settings...
Also strange is that when I go into Wireless Config, the Wireless key
isnt there, altough the key is saved in the config file under
/etc/NetworkManager/system-connections/MyConnection...
--
Network Manager
** Attachment added: acpidump.raw
http://launchpadlibrarian.net/18967421/acpidump.raw
--
Kernel stops booting on HP EliteBook 8530w
https://bugs.launchpad.net/bugs/288385
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
I tried this boot options, and both didn't worked...
Intresting is, that SuSE 11 with latest updates seems to work:
http://www.linlap.com/wiki/HP+EliteBook+8530W
I'll gona try some other kernel versions...
--
Kernel stops booting on HP EliteBook 8530w
https://bugs.launchpad.net/bugs/288385
You
I tried the new 2.6.28-rc2, which did not work. Then I tried 2.6.25.19,
which worked with ACPI, but only some times. About every second time he
hangs at the same point where the current Ubuntu 8.10 kernel does. But
sometimes he boots and acpi seems to work.
I attached output of dmesg when booting
I had this error today on a fresh AMD64 installation, just typed sudo
aptitude install libvirt-bin
--
package libvirt-bin 0.4.4-3ubuntu2 failed to install/upgrade: subprocess
post-installation script returned error exit status 1
https://bugs.launchpad.net/bugs/273748
You received this bug
Hi Sanix,
Nice to see another ubuntu user who own this device... can you contact
me (e-mail should be visible in my profile), maybe we can share
information how to bring other things to work on it
--
Kernel stops booting on HP EliteBook 8530w
https://bugs.launchpad.net/bugs/288385
You
Public bug reported:
I tried todays Intrepid daily build on my new HP EliteBook 8530w. When I
tried to install Ubuntu with the alternate disc, the kernel stopped
booting some seconds after the boot menu. I changed the boot paramter
and removed quiet. I made a picture at the point the kernel hangs
** Attachment added: Itrepid amd64 daily build of 20081022 on hp 8530w
http://launchpadlibrarian.net/18826882/DSC_0161.JPG
--
Kernel stops booting on HP EliteBook 8530w
https://bugs.launchpad.net/bugs/288385
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Same problem is in 32-Bit also
** Attachment added: Itrepid x86 daily build of 20081022 on hp 8530w
http://launchpadlibrarian.net/18826971/DSC_0162.JPG
--
Kernel stops booting on HP EliteBook 8530w
https://bugs.launchpad.net/bugs/288385
You received this bug notification because you are
I would love to see OpenOffice.org 3 in Intrepid.
I belive, that when you don't include it, everybody will get it through
PPA and download it anyway. Escpecially the users which really using it
daily! Yes, I know, its okey to use PPA's! I love them too! BUT when a
huge amount of users use a PPA,
You can use the VNC-Server Display in virt-manager and connect to the
console with a serial console. The QEMU Console is mapped to a
/dev/pts/X device... Works like a charm for me...
However, It would be nice to have the SDL Window working anyway... :-)
--
Local SDL window does not work
I use my laptop on the road, where i want to connect to my company and
to one of our customers... Would be very nice if i could do this throuth
network manager! At the moment i use default openvpn client to connect
to my company and use network manager for the costumers vpn's...
--
Unable to
Additional I found out that with a costum theme, the bug appearse more
often (maybe its just subjective...
For better ilustration I attached a bug. Nautilus shows the root folder,
but the addressbar shows /home...
** Attachment added: nautilus-backspace-bug.png
I can reproduce this bug when I use Listview on Ubuntu 8.04.1. I even
can reproduce it with double backspace (which is the shortcut for this
function). I use backspace _very_ often to go the parents folder, and
notice this bug daily, its realy annoying!
--
Nautilus doesn't update title and
Hello,
I have a similar problem using Pokerstars. When I play a game I do often other
things beside (like writting comments to bugs ;-)). The window pops up when its
my turn to play... So I do something, and suddenly pokerstars pops up, and I do
my choise and continuing working... When I work
And yes, working with hardy and latest updates
--
Fullscreen wine applications disapear from window list on workspace switch
https://bugs.launchpad.net/bugs/156542
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
Thanks! This fix work for me!
--
OpenVPN doesn't start after USN-612-3: New key is accused to be vulnerable
https://bugs.launchpad.net/bugs/230208
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
1 - 100 of 119 matches
Mail list logo