Normally SMPP can act as a transmitter, a receiver or a transceiver
(transmit+receiver).
The carrier want you to know that you need to create a connection with
transmit and one connection with receive, and not only one with
transceiver.
J
Diego Helmann ha scritto:
Hi all
I have to connect
Many US operators simply don't allow binary messages to pass and Verizon
is CDMA... let's wait the get to the modern age :-D
Julien
Justin Foell ha scritto:
Hello,
I have kannel working on Linux 2.6.19 sending SMS through a MultiTech
modem with a T-Mobile SIM card. However, I only seem to
You should maybe find a more suitable string for that specific modem...
J
Subramanya H S ha scritto:
Hi All,
Ihave a problem in running the bearerbox
the below is the output
..
.
2006-09-14 11:42:58 [3943] [6] DEBUG: AT2[/dev/ttyACM0]: -- AT+CSMS=?^M
2006-09-14 11:42:58 [3943] [6]
Hello list!
I'm a happy kannel user since more than a couple of years now, but I've
used it only as a sms interface from http to some protocols like smpp,
emi or at-commands and for these I really need to THANK the guys
outthere: Andreas, Bruno, Stipe and Aarno(also thanks for helping in the
Yes, the solution I found is the same and costs around 150€.
Usb powered with antenna really easy to access, has also gprs for mms.
I am using it under fedora core 3.
J
Souza, Jeffrey R. ha scritto:
I've gotten MultiTech (formerly Wavecom) USB GSM Modems Model MTCBA-G-U-F1
to work with
You need to install some more libraries to compile, check docs for
minimum requirements.
Julien
sarwat jabeen ha scritto:
the following error occurs with the make command :
[EMAIL PROTECTED] gateway-1.4.0]# make
gcc -D_REENTRANT=1 -I. -Igw -D_XOPEN_SOURCE=600 -D_BSD_SOURCE
try to hold the phone to a loudspeaker in order to have an
electro-magnetic indication that the SMS is in fact arriving the device.
Stipe
Hi Stipe,
I did also that :-D I'm pleased such uncommons techniques are used by
you too :-D
However I got it solved: my application was waiting for
not a standard sms but a ringtone.
Cheers.
Julien
Wayne Khan ha scritto:
Hi Linkas,
When you specify in the kannel config file:
.
.
.
group = smsbox
bearerbox-host = localhost
sendsms-port = 14013
global-sender = 123
log-file = /export/home/sites/sms/kannel/smsbox.log
log-level = 1
access-log
Hello,
as I'm working with a J2ME application runnning on my phone in wich I
can specify on which port I can listen for sms messages, I was wondering
if anyone knows how to specify a specific destination port number with
kannel when sending messages.
I think this can be done setting the
If the JAD file is well written, you can send a wappush with the JAD
url.
Then the phone will download the jad file, read it, download the JAR
and start installation.
I've done it right now, so it works
J
Hanna Kreitem ha scritto:
Thanks for your reply, but can I send JAD/JAR via MMS?,
Read from the MANUAL, should be a max-messages variable that has to be
set to 0 or something similar.
J
Brent Goldspring wrote:
Hi,
How do I turn off SMS
Services in Kannel, i.e., I want it
so that when someone replies to an SMS or sends an SMS to one our
modems,
I would suggest first of all to make an html page to prepare the
sendsms command with encoding to UTF-8
Also check for this options:
charset
string
Charset of text message. Used
to convert to a format suitable for 7 bits or to UCS2. Defaults to
ISO-8859-1 if coding
Maybe you need to configure a SMSBOX to send the message ? :-D
Jim Cullen wrote:
Hello All,
Pretty new to this but here goes.
Have installed Kannel, all working
well, can send and recieve SMS over various providers.
Trying to send WAP push now. Set
everything up and
DeLivery Report - that is a back-message that works as a receipe telling
the SMS has been received by the handset (phone).
It does not guarantee the message has been read.
J
Zouari Fourat wrote:
I found that on the user guide, it speas about dlr storage... is there
anybody who can explain
Brent Goldspring wrote:
Hello all,
We are using Kannel
with a GSM modem: what is the
quickest and easiest way (for an application) to determine if the modem
sent
the SMS or not? I do not need delivery reports, just wether the modem
said,
“OK” or “Error”. Am I going
I do agree with Milton.
Sometimes mailinglists are not so clearly open - infact it should be
mentioned that everything here goes to google.
Newsgroups are different than mailing lists ... we do expect newsgroups
to go around and be open, this is not the same as mailing lists.
About the fact
Well, that's what I have, my real problem is that NO DLR at all is
received by bearerbox because the wapbox/ppg does NOT set dlr-mask = 31
nor dlr-url is set while sending the sms.
Infact, ppg get xml files, convert them, pass binary to bearerer
(without setteing dlr correctly) - bearer sends
Ok guys, the problem in NOT in the url syntax
Julien
Mike Nwaogu wrote:
hello,
I'm not sure how you'll impliment it, but you need to
be sure that the URL has no spaces inbetween the
values for the parameters. when there's a break the
URL may not be properly represented.
EG: BAD
The right question should have been:
Where is the documentation ? Will I find the answer to my questions
there ? :-D
Ehehe just kiddin' however:
concatenation
bool
Long messages can be sent as
independent SMS messages with concatenation = false
or as concatenated
I've set the
ppg-smsbox-id in the ppg core group and also set the smsbox-id in the
smsbox group.
When I call the /wappush url to send wappushes I do set the
dlr-url=CUT and dlr-mask=31 like:
POST
/wappush?username=ppgusernamepassword=ppgpassworddlr-mask=31dlr-url='.urlencode($my_dlr_url).'
Hello,
I'm trying to POST two files (PAP and SI) to the wapbox.
I send:
POST /wappush?username=ppgusernamepassword=ppgpassword HTTP/1.1
Host: 10.100.20.10:8080
User-Agent: PEAR HTTP_Request class ( http://pear.php.net/ )
Connection: close
Accept-Encoding: gzip
Content-Type: multipart/form-data;
Ricky Wibowo wrote:
Any one have a simple script for fetching incoming message??
Or any URL, that I can download it??
thanx
Check for PERL and SMPP module, you will be able to find a simple server
solution to modify for your needs, but with very very slow troughtput.
J
Hello,
I would like to send the SMS indication about a MMS direcly with kannel.
I don't want to send an MMS with kannel - I just want to send the SMS
that tells the phone about the MMS.
Can anyone help me composing the headers and contents ?
Thanks
J
Can you please explain a little more ?
Thanks
J
Willy Mularto wrote:
Hi I just solve the problem,
We need to modify the smsc options:
source-addr-ton = 0
source-addr-npi = 1
dest-addr-ton = 1
dest-addr-npi = 1
or maybe just add this:
#source-addr-autodetect = yes
Hope it can helps others to :)
Kannel cannot accept SMPP connections from clients
J
[EMAIL PROTECTED] wrote:
did anyone got any answer how to config kannel as smpp-server?
Anders
- Vidarebefodrat meddelande frn Julien Buratto [EMAIL PROTECTED] -
Datum: Wed, 20 Apr 2005 09:37:08 +0200
Frn: Julien
Hello,
I don't know why, my fastrak gsm modem receives 3-4-6 times the same
message.
well, no, infact it receive 1 message but then it call many time the
service.
It appears to me link if some messages are stored in memory and then
read again.
Has anyone had such experience ?
My conf:
group =
Alejandro J. Ramrez wrote:
Hello All!
Ive
been reading a LOT of the
mails of this mailing list and thanks to that Ive been able to
set up the PPG, and send a simple wap
push. Now
the one million dollar question. How can I send a ringtone?
I mean
Hello,
I've started working with a Wavecom Fastrack GSM modem and I saw some
things are very missing:
- Network registration monitoring (if the modem is lost connection with
the GSM network)
- Antenna's signal monitoring (signal power check)
- RING answer with an SMS (SMS answering machine to
Also depends on the type of connection you have with your provider/smsc.
Using EMI/UCP protocol is know not to have a unique id to any message.
Infact if your kannel will send more than one message in a single
second, ts will confuse the DLR and the reply is not unique.
J
Anand Gupta wrote:
Thx
Are you sure you haven't set a wrong type in the MySQL ?
Something like tinyint or similar ...
J
JML wrote:
Message
Hi ,
Does someone knows why our SMS ID (also
identified as timestamp when using with mysql) only went from 0 (zero)
to 255).
We are using kannel 1.3.2 and mysql
Can someone please tell me how i can simulate the sms
sending and recieving process on my machine ?.
First of all, read the User guide.
(http://kannel.org/download/1.4.0/userguide-1.4.0/userguide.html)
Second, in the User guide check the 'Fake SMSC'
This is undocumented under the kannel docs :-D
J
Alejandro Guerrieri wrote:
Yes, it's a very popular issue! That could cause problems specially on
heavy loaded systems, where the probability of many messages being
queued on the same ts second increases.
I partially agree.
Infact my system is not heavily loaded. It's just a login and shot
Rafael Ugolini Trussardi wrote:
Your cell phone doesnt offer you to put Reply-to number ?!
No...
On Mon, 14 Mar 2005 21:04:01 +0100
Linkas [EMAIL PROTECTED] wrote:
Hi,
Im using kannel to send sms messages, but i cant find a variable
for me to put a Reply to number.
I want to send
can try to send SL over PPG. Then all these hex bytes will go
to PPG, and
we need not handle them separately many times over.
c) As per your question, see between the lines
Aarno
On 26.2.2005, at 11:50, Linkas wrote:
In the the contrib/web/sendsms.php I have Service Indication
(WAPPUSHSI
Let me quote this:
Definitely *not*. Nokia does not support SL,
considering it dangerous.
Aarno
On 26.2.2005, at 16:17, JJ wrote:
Did you had success on sending Wap Push SL
messages to Nokia with kannel ?
Bye
Julien
Linkas wrote:
Then the
only thing remaining
Uhmm I see that you are using Wap Push Service Indication - and that one
works ok for me (even without hex_encode), my problems are in the Wap
Push Service Load.
The problem is in the very first bytes, not in the URL, so I write it
down again:
// I think the problem is in this block
%01 //
Navjot Singh wrote:
Hi,
Here's a sample.
VCard
BEGIN:VCARD\r\nVERSION:2.1\r\nN:Navjot
Singh\r\nTEL;PREF:9811178486\r\nEND:VCARD\r\n
http://localhost:13013/cgi-bin/sendsms?user=adminpass=navisto=9811178486udh=%06%05%04%23%F4%00%00text=
In the the contrib/web/sendsms.php I have Service Indication (WAPPUSHSI)
working fine, but not the WAPPUSHSL.
I've tried to modify a couple of strange things I saw, and here is the
job:
My UDH is: %06%05%04%0B%84%23%F0
(same ad Wap Push SI)
While the text message is:
$fields['text'] .= %01; #
I know it could look strange, but as it works on Wap Push SI not
encoded, why shouldn't work on SL like that ?
Julien
Peter Beckman wrote:
It should be 100% binary. You need to encode the URL.
$fields['text'] .= %08 . %03 . $URL . %00;
$fields['text'] .= %01; # /si
The resulting HTTP GET is:
I've never even tried to do it, so pardon me in advance.
If I do connect a phone with a cable to a pc with kannel on it and
ensure a serial communication, where do I receive messages ?
I use kannel to send, and I use to work on the db where DLR are stored.
Will the kannel act as an HTTP client
Hi, I would like to know how to get the time the SMS has been delivered
to phone (I'm using DLR mask code 31).
Wich is the % variable ? :)
Thanks
J
Hi,
I want to test how many users
canKannel handleat the same time, simulating wap connections. Does
anybody know how to do it?, or does anyone knows any tool that i can
use.
Thanks,
Carlos
Try to "stress" it a little :-D
http://support.microsoft.com/kb/231282/en-us
Hello, I need a piece of suggestion :)
I would like to know if it's possible to set a special header in a SMS
and get it back when someone replies to the SMS it receives.
Example:
1) Use kannel and send an SMS to my friend's phone Joe (I set inside the
SMS a special header like: CODE:987)
2)
When sending many SMS at once, the bearerbox
(version 1.4 compiled on RedHat 9) seems to have strange
behaviours.
It gets the first 2-3 messages, then send them
upon the EMI smsc I have.
All the remaining SMS goes into the STORE and
are sent really VERY VERY slowly.
Restarting the
My SMSC operator ask a fee for each delivery receipt I get.
In the user guide I can read:
The value is a bit mask composed of: 1: Delivered to phone, 2:
Non-Delivered to Phone, 4: Queued on SMSC, 8: Delivered to SMSC, 16:
Non-Delivered to SMSC (...)
So, my question is:
will my operator bill me
46 matches
Mail list logo
