FC34 on a headless server. If I upgrade the kernel and reboot, the
machine will not power up. I can manually power it up without a problem.
Also, no problem rebooting without a kernel upgrade.
Any help appreciated.
sean
___
users mailing list --
On 2/1/21 5:12 PM, Samuel Sieb wrote:
On 2/1/21 2:04 PM, sixpack13 wrote:
Running scriptlet: kernel-core-5.10.11-200.fc33.x86_64
174/174
dracut-install: No SOURCE argument given
Usage: dracut-install -D DESTROOTDIR [-r SYSROOTDIR] [OPTION]... -a
On 1/29/21 5:12 PM, Paolo Galtieri wrote:
Folks,
I have a new dell laptop. I tried to install Fedora 33 on it, but it
failed to find any disks. I searched the internet and discovered that
if my BIOS has RAID enabled F33 is unable to find any drives. I
disabled RAID and enable AHCI and
Running scriptlet: kernel-core-5.10.11-200.fc33.x86_64
174/174
dracut-install: No SOURCE argument given
Usage: dracut-install -D DESTROOTDIR [-r SYSROOTDIR] [OPTION]... -a
SOURCE...
or: dracut-install -D DESTROOTDIR [-r SYSROOTDIR] [OPTION]... SOURCE
On 5/9/20 9:12 PM, Samuel Sieb wrote:
On 5/9/20 3:38 PM, sean darcy wrote:
And it works. I can now dual boot, and Windows is a LOT faster.
Oh, the irony...
Absolutely. Why in the world would Dell sell an nvme laptop provisioned
with RST
On 5/7/20 10:49 AM, sean darcy wrote:
My new laptop has Windows 10 installed with the Intel
rapid Storage Technology (optane) system chip. Windows is on an nvme
drive.
FC31 is on a SATA ssd.
BIOS allows me to choose AHCI or RST. I must use AHCI to boot the FC31
drive, and RST to boot
On 5/9/20 1:38 AM, Robert G (Doc) Savage via users wrote:
On Thu, 2020-05-07 at 10:49 -0400, sean darcy wrote:
My new laptop has Windows 10 installed with the Intel
rapid Storage Technology (optane) system chip. Windows is on an nvme
drive.
FC31 is on a SATA ssd.
BIOS allows me to choose
On 5/7/20 10:49 AM, sean darcy wrote:
My new laptop has Windows 10 installed with the Intel
rapid Storage Technology (optane) system chip. Windows is on an nvme
drive.
FC31 is on a SATA ssd.
BIOS allows me to choose AHCI or RST. I must use AHCI to boot the FC31
drive, and RST to boot
My new laptop has Windows 10 installed with the Intel
rapid Storage Technology (optane) system chip. Windows is on an nvme
drive.
FC31 is on a SATA ssd.
BIOS allows me to choose AHCI or RST. I must use AHCI to boot the FC31
drive, and RST to boot the Windows drive. Neither will boot with
On 5/6/20 7:55 PM, Samuel Sieb wrote:
On 5/6/20 4:38 PM, sean darcy wrote:
I'm on FC31, dual boot.
os-prober finds the Windows efi boot partition. /dev/nvme0n1p1
sudo mount /dev/nvme0n1p1 nvme0n1p1/
$ ls nvme0n1p1/EFI/Microsoft/Boot/bootmgfw.efi
nvme0n1p1/EFI/Microsoft/Boot/bootmgfw.efi
I'm on FC31, dual boot.
os-prober finds the Windows efi boot partition. /dev/nvme0n1p1
sudo mount /dev/nvme0n1p1 nvme0n1p1/
$ ls nvme0n1p1/EFI/Microsoft/Boot/bootmgfw.efi
nvme0n1p1/EFI/Microsoft/Boot/bootmgfw.efi
But boot from the grub menu fails:
'/efi/Microsoft/Boot/bootmgfw.efi' not found
On 5/1/20 3:03 PM, Samuel Sieb wrote:
On 4/30/20 6:44 AM, sean darcy wrote:
The F32 installer fails. systemd-gpt-auto-generator can't find the EFI
partition because the bootloader did not set it. Therefore sysroot is
not setup.
This is an Acer laptop, upgrading from F31.
You say "inst
On 4/30/20 9:44 AM, sean darcy wrote:
The F32 installer fails. systemd-gpt-auto-generator can't find the EFI
partition because the bootloader did not set it. Therefore sysroot is
not setup.
This is an Acer laptop, upgrading from F31.
Before that error, and maybe related
The F32 installer fails. systemd-gpt-auto-generator can't find the EFI
partition because the bootloader did not set it. Therefore sysroot is
not setup.
This is an Acer laptop, upgrading from F31.
Before that error, and maybe related to it, there are errors loading 2
X.509 certificates.
1.
On 4/28/20 11:18 AM, Bob Goodwin wrote:
Where can I download Fedora XFCE Workstation, is it even available yet,
I have not found it?
Bob
https://dl.fedoraproject.org/pub/fedora/linux/releases/32/Spins/x86_64/iso/Fedora-Xfce-Live-x86_64-32-1.6.iso
On 4/28/20 11:18 AM, Bob Goodwin wrote:
Where can I download Fedora XFCE Workstation, is it even available yet,
I have not found it?
Bob
Here's the most recent release candidate:
https://dl.fedoraproject.org/pub/alt/stage/32_RC-1.6/Spins/x86_64/iso/Fedora-Xfce-Live-x86_64-32-1.6.iso
32
On 4/28/20 10:08 AM, sean darcy wrote:
On 4/27/20 6:33 PM, stan via users wrote:
On Mon, 27 Apr 2020 10:42:52 -0400
sean darcy wrote:
I am just guessing here, since I don't know what the problem is.
What happens if you comment or remove this line? This is the only
line in your
On 4/27/20 6:33 PM, stan via users wrote:
On Mon, 27 Apr 2020 10:42:52 -0400
sean darcy wrote:
I am just guessing here, since I don't know what the problem is.
What happens if you comment or remove this line? This is the only
line in your configuration file that seems to have something
When I startx xfce , the desktop opens all screwed up. The desktop is
divided into 6 equal horizontal stripes. Each stripe starts about 100
pixels to the right of the one above it, and wraps around to the left.
Screenshot doesn't work.
But if I delete
I'm trying to create a small virtual guest for debian using Virtual
Machine Manager. I accept all the defaults, but:
Unable to complete install: 'unsupported configuration: 'directory'
storage format is not directly supported by QEMU, use 'dir' disk type
instead'
Traceback (most recent
On 2/15/20 8:01 AM, Ed Greshko wrote:
On 2020-02-14 10:54, sean darcy wrote:
I've got an old laptop on fc31. I'd like to ssh in and stream music that plays
on the remote. I can ssh in to the remote and bring up firefox, but it tries to
play music on the ssh client, not the remote.
Any
On 2/13/20 10:32 PM, Mike Wright wrote:
On 2/13/20 6:54 PM, sean darcy wrote:
I've got an old laptop on fc31. I'd like to ssh in and stream music
that plays on the remote. I can ssh in to the remote and bring up
firefox, but it tries to play music on the ssh client, not the remote.
Any
I've got an old laptop on fc31. I'd like to ssh in and stream music that
plays on the remote. I can ssh in to the remote and bring up firefox,
but it tries to play music on the ssh client, not the remote.
Any suggestions appreciated.
sean
___
users
On 2/5/20 2:49 AM, Ed Greshko wrote:
On 2020-02-04 10:59, sean darcy wrote:
syslog has this every 10 seconds:
audit[1039229]: AVC avc: denied { read } for pid=1039229 comm="rpm" name="Providename"
dev="dm-1" ino=2622531 scontext=system_u:system_r:
On 2/3/20 10:02 PM, Samuel Sieb wrote:
On 2/3/20 6:59 PM, sean darcy wrote:
syslog has this every 10 seconds:
audit[1039229]: AVC avc: denied { read } for pid=1039229 comm="rpm"
name="Providename" dev="dm-1" ino=2622531
scontext=system_u:system_r:
syslog is full of this:
AVC avc: denied { read } for pid=1225843 comm="rpm"
name="Providename" dev="dm-1" ino=2622531
scontext=system_u:system_r:setroubleshootd_t:s0
tcontext=unconfined_u:object_r:var_lib_t:s0 tclass=file permissive=0
setroubleshootd[1223244]: error: cannot open Name index
syslog has this every 10 seconds:
audit[1039229]: AVC avc: denied { read } for pid=1039229 comm="rpm"
name="Providename" dev="dm-1" ino=2622531
scontext=system_u:system_r:setroubleshootd_t:s0
tcontext=unconfined_u:object_r:var_lib_t:s0 tclass=file permissive=0
setroubleshootd[1036631]:
On 1/30/20 6:54 PM, Mike Wright wrote:
On 1/30/20 3:17 PM, sean darcy wrote:
On 1/25/20 5:59 PM, Samuel Sieb wrote:
On 1/25/20 2:18 PM, sean darcy wrote:
On 1/25/20 3:33 PM, Samuel Sieb wrote:
On 1/25/20 9:06 AM, sean darcy wrote:
On FC31 I can't persistently rename the interfaces, see
On 1/30/20 6:33 PM, Tom Horsley wrote:
On Thu, 30 Jan 2020 18:17:23 -0500
sean darcy wrote:
Any help really appreciated.
Install network-scripts, make a ifcfg file with NM_CONTROLLED=no,
enable the "network" service, and get NetworkManager completely
out of the picture.
That's
On 1/30/20 6:54 PM, Mike Wright wrote:
nmcli device set eth0 managed yes
Good idea, but no, alas :
#nmcli d
DEVICE TYPE STATECONNECTION
eth1ethernet connectedeth1
wlan0 wifi unavailable --
eth0ethernet unmanaged--
lo loopback unmanaged--
#
On 1/25/20 5:59 PM, Samuel Sieb wrote:
On 1/25/20 2:18 PM, sean darcy wrote:
On 1/25/20 3:33 PM, Samuel Sieb wrote:
On 1/25/20 9:06 AM, sean darcy wrote:
On FC31 I can't persistently rename the interfaces, see:
https://bugzilla.redhat.com/show_bug.cgi?id=1777893
So I want to use FC31
On 1/25/20 5:38 PM, Ed Greshko wrote:
On 2020-01-26 06:34, sean darcy wrote:
I can't cut and paste the output because I can't access the machine when it's
on the FC31 kernel, since no interfaces are up. I have to manually reboot and
use the keyboard, and then reboot to the Fc30 kernel.
Sure
On 1/25/20 5:18 PM, sean darcy wrote:
On 1/25/20 3:33 PM, Samuel Sieb wrote:
On 1/25/20 9:06 AM, sean darcy wrote:
On FC31 I can't persistently rename the interfaces, see:
https://bugzilla.redhat.com/show_bug.cgi?id=1777893
So I want to use FC31 interface names : enp1s0 and enp0s20u3.
I've
On 1/25/20 3:33 PM, Samuel Sieb wrote:
On 1/25/20 9:06 AM, sean darcy wrote:
On FC31 I can't persistently rename the interfaces, see:
https://bugzilla.redhat.com/show_bug.cgi?id=1777893
So I want to use FC31 interface names : enp1s0 and enp0s20u3.
I've used nmtui to set up the interfaces
On 1/24/20 1:06 PM, Mike Wright wrote:
On 1/24/20 9:54 AM, sean darcy wrote:
I'm trying to set up a dmz between my internal network and the router.
Interface A for internal, interface B for the router. How do I make
sure the default route is set to interface B ?
Hi Sean,
I can give you
On FC31 I can't persistently rename the interfaces, see:
https://bugzilla.redhat.com/show_bug.cgi?id=1777893
So I want to use FC31 interface names : enp1s0 and enp0s20u3.
I've used nmtui to set up the interfaces. But NM won't activate them
because they are "strictly unmanaged" !!
How do I
I'm trying to set up a dmz between my internal network and the router.
Interface A for internal, interface B for the router. How do I make sure
the default route is set to interface B ?
sean
___
users mailing list -- users@lists.fedoraproject.org
To
On 1/22/20 3:47 PM, Samuel Sieb wrote:
On 1/22/20 12:00 PM, sean darcy wrote:
On 1/22/20 1:01 AM, Samuel Sieb wrote:
restorecon -rv /etc/asterisk"
Thanks. That did it.
I'll never understand selinux.
My guess is that you copied or more likely moved files into there from
somewhere
On 1/22/20 1:01 AM, Samuel Sieb wrote:
restorecon -rv /etc/asterisk"
Thanks. That did it.
I'll never understand selinux.
sean
___
users mailing list -- users@lists.fedoraproject.org
To unsubscribe send an email to
I'm running asterisk, a telephony app, on Fedora 31.
If I start asterisk as user asterisk all goes well. But if I use
systemd, I get a bunch of permission problems.
asterisk[1411]: [Jan 21 19:36:47] ERROR[1411]: res_sorcery_config.c:320
sorcery_config_internal_load: Unable to load config
On 12/15/19 10:11 AM, sean darcy wrote:
On 12/13/19 10:50 PM, Tim via users wrote:
On Fri, 2019-12-13 at 18:45 -0500, Sean Darcy wrote:
FC31 on a laptop. I'd like the have localhost as the first
nameserver. Then the the nameservers supplied by dhcp.
That is:
resolv.conf
127.0.0.1
[whatever
On 12/13/19 10:50 PM, Tim via users wrote:
On Fri, 2019-12-13 at 18:45 -0500, Sean Darcy wrote:
FC31 on a laptop. I'd like the have localhost as the first
nameserver. Then the the nameservers supplied by dhcp.
That is:
resolv.conf
127.0.0.1
[whatever dhcp provides]
So I can't set DNS=none
FC31 on a laptop. I'd like the have localhost as the first nameserver.
Then the the nameservers supplied by dhcp.
That is:
resolv.conf
127.0.0.1
[whatever dhcp provides]
So I can't set DNS=none. There used to be "head" for for
resolv.conf.d, but that doesn't exist for FC31.
sean
On 12/12/19 1:27 PM, Ed Greshko wrote:
On 2019-12-13 00:39, sean darcy wrote:
On 12/11/19 11:38 PM, Ed Greshko wrote:
On 2019-12-12 12:32, sean darcy wrote:
On 12/11/19 9:12 PM, Ed Greshko wrote:
On 2019-12-12 09:08, Tom Horsley wrote:
On Wed, 11 Dec 2019 19:59:04 -0500
sean darcy wrote
On 12/11/19 11:38 PM, Ed Greshko wrote:
On 2019-12-12 12:32, sean darcy wrote:
On 12/11/19 9:12 PM, Ed Greshko wrote:
On 2019-12-12 09:08, Tom Horsley wrote:
On Wed, 11 Dec 2019 19:59:04 -0500
sean darcy wrote:
/etc/sysconfig/desktop was empty.
Or maybe the problem is that it existed. I
On 12/11/19 9:12 PM, Ed Greshko wrote:
On 2019-12-12 09:08, Tom Horsley wrote:
On Wed, 11 Dec 2019 19:59:04 -0500
sean darcy wrote:
/etc/sysconfig/desktop was empty.
Or maybe the problem is that it existed. I have no such
file on my system and X is working fine.
Well, I have a pure Xfce
On 12/11/19 4:37 PM, Sean Darcy wrote:
I've upgrade another machine to FC31, and have another problem. X won't start.
Here's Xorg.0.log. Nothing obvious to me.
Any help appreciated.
sean
X.Org X Server 1.20.6
X Protocol Version 11, Revision 0
[ 3347.582] Build Operating System: 5.0.6-200
On 12/11/19 6:20 PM, Ed Greshko wrote:
On 2019-12-12 06:59, sean darcy wrote:
On 12/11/19 5:41 PM, Ed Greshko wrote:
On 2019-12-12 06:04, Samuel Sieb wrote:
On 12/11/19 1:37 PM, Sean Darcy wrote:
I've upgrade another machine to FC31, and have another problem. X won't start.
Here's Xorg.0
On 12/11/19 5:41 PM, Ed Greshko wrote:
On 2019-12-12 06:04, Samuel Sieb wrote:
On 12/11/19 1:37 PM, Sean Darcy wrote:
I've upgrade another machine to FC31, and have another problem. X won't start.
Here's Xorg.0.log. Nothing obvious to me.
[ 3349.146] (II) Server terminated successfully (0
On 12/11/19 5:41 PM, Ed Greshko wrote:
On 2019-12-12 06:04, Samuel Sieb wrote:
On 12/11/19 1:37 PM, Sean Darcy wrote:
I've upgrade another machine to FC31, and have another problem. X won't start.
Here's Xorg.0.log. Nothing obvious to me.
[ 3349.146] (II) Server terminated successfully (0
On 12/11/19 5:04 PM, Samuel Sieb wrote:
On 12/11/19 1:37 PM, Sean Darcy wrote:
I've upgrade another machine to FC31, and have another problem. X
won't start.
Here's Xorg.0.log. Nothing obvious to me.
[ 3349.146] (II) Server terminated successfully (0). Closing log file.
X is starting fine
On 12/11/19 4:37 PM, Sean Darcy wrote:
I've upgrade another machine to FC31, and have another problem. X won't start.
Here's Xorg.0.log. Nothing obvious to me.
Any help appreciated.
sean
X.Org X Server 1.20.6
X Protocol Version 11, Revision 0
[ 3347.582] Build Operating System: 5.0.6-200
I've upgrade another machine to FC31, and have another problem. X won't start.
Here's Xorg.0.log. Nothing obvious to me.
Any help appreciated.
sean
X.Org X Server 1.20.6
X Protocol Version 11, Revision 0
[ 3347.582] Build Operating System: 5.0.6-200.fc29.x86_64
[ 3347.585] Current Operating
Just updated FC30->FC31. Now I'm in a soft lockup boot loop.
Since I can't boot, no logs.
Just before the lockup:
random: crng init done
random: 7 urandom warning(s) missed due to ratelimiting
then
watchdog: BUG: soft lockup - CPU#0 stuck for 23s!
It sits for a while, then reboots. Rinse and
On 11/27/19 5:36 PM, Bill Shirley wrote:
My 70-persistent-net.rules looks like this:
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*",
ATTR{address}=="00:25:22:36:97:f9", ATTR{type}=="1", KERNEL=="eth*",
NAME="lan4"
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*",
nocbs=0-15"
Then regenerate the grub menu:
# legacy BIOS
grub2-mkconfig -o /boot/grub2/grub.cfg
I don' have but one EFI server:
# EFI BIOS
grub2-mkconfig -o /boot/efi/EFI/fedora/grub.cfg
Bill
On 11/27/2019 10:42 AM, sean darcy wrote:
On 11/27/19 8:09 AM, Roberto Ragusa wrote:
On 2019-1
On 11/27/19 8:09 AM, Roberto Ragusa wrote:
On 2019-11-26 19:58, Sean Darcy wrote:
On boot:
kernel: asix 2-3:1.0 eth0: register 'asix' at usb-:00:14.0-3, ASIX
AX88772 USB 2.0 Ethernet, 00:0e:c6:dc:01:aa
kernel: usbcore: registered new interface driver asix
kernel: asix 2-3:1.0 enp0s20u3
Just upgraded to FC31. It's a multihomed machine used as a router. One
interface "external" goes to the cable modem. The other interface
"internal" goes to a switch.
cat /etc/sysconfig/network-scripts/ifcfg-external | grep -v \#
TYPE=Ethernet
BOOTPROTO=dhcp
DEVICE=external
ONBOOT=yes
On 11/24/19 2:39 AM, francis.montag...@inria.fr wrote:
Hi.
I haven't read all this thread. Just a remark about grub. See below.
On Sat, 23 Nov 2019 21:37:42 -0700 stan via users wrote:
...
ran grub2-mkconfig. No entries again in output. It can't find the
f29 and f30 in /boot.
...
The
On 11/23/19 10:36 AM, stan via users wrote:
On Fri, 22 Nov 2019 17:15:58 -0500
sean darcy wrote:
So I chroot'd into the old installation. BIOs boot, not EFI. No
entries at all in grub.cfg.
Are you trying to convert from bios/mbr boot to uefi boot on the
upgrade? I think if you already have
On 11/21/19 9:47 AM, stan via users wrote:
On Thu, 21 Nov 2019 06:49:44 -0500
sean darcy wrote:
Nothing is mounted under /mnt/sysimage. What should I mount there ?
The installed "/" partition ?
Richard answered this question better than I would have.
Not sure what you mea
On 11/20/19 7:33 PM, stan via users wrote:
On Wed, 20 Nov 2019 10:08:23 -0500
Sean Darcy wrote:
I upgraded 29-> 30. Now I can't even get to the boot screen. I've made
a live usb stick, but the stick only wants to install a completely new
system. Is there any way to use the st
I upgraded 29-> 30. Now I can't even get to the boot screen. I've made
a live usb stick, but the stick only wants to install a completely new
system. Is there any way to use the stick to troubleshoot the existing
installation.
If I had to guess the upgrade screwed up the the UEFI boot. I can boot
On 5/3/19 7:31 PM, Samuel Sieb wrote:
On 5/3/19 4:23 PM, sean darcy wrote:
On 5/3/19 7:10 PM, Samuel Sieb wrote:
On 5/3/19 2:18 PM, sean darcy wrote:
$ vainfo
libva info: VA-API version 1.4.1
X Error of failed request: BadRequest (invalid request code or no
such operation)
Major opcode
On 5/3/19 7:10 PM, Samuel Sieb wrote:
On 5/3/19 2:18 PM, sean darcy wrote:
$ vainfo
libva info: VA-API version 1.4.1
X Error of failed request: BadRequest (invalid request code or no
such operation)
Major opcode of failed request: 154 (DRI2)
Minor opcode of failed request: 1
I've installed libva and the intel driver:
rpm -qa | grep libva | sort
libva-2.4.1-1.fc29.x86_64
libva-devel-2.4.1-1.fc29.x86_64
libva-intel-driver-2.3.0-2.fc29.x86_64
libva-intel-hybrid-driver-1.0.2-14.fc29.x86_64
libva-utils-2.4.0-1.fc29.x86_64
I've got a cpu that should support it - Gen 9:
On 4/19/19 1:39 PM, Phil Wyett wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Fri, 2019-04-19 at 13:09 -0400, sean darcy wrote:
FC29. I have a server for video encoding. I use x264, which I keep
updated to the most recent git packaaged in an rpm.
rpm -q x264-libs
x264-libs-0.157
FC29. I have a server for video encoding. I use x264, which I keep
updated to the most recent git packaaged in an rpm.
rpm -q x264-libs
x264-libs-0.157-0.20190331.fc29.x86_64
I then rebuild all the packages that depend on x264, including
avidemux-libs. I just rebuild on my machine, without
On 4/4/19 11:39 AM, sixpack13 wrote:
I'm no expert, but I guess config's to/ for (?) old scanners are also stored in
one of your hidden user directory.
Crtl + h will unhide e.g. /home// .xsane in my case
___
Great idea, but no cigar. ~/.sane and
On fedora 29 , sane-backends 1.0.27.
scanimage -L shows a number of scanners that are no longer connected,
and haven't been used in years.
In what file is this info stored ? Couldn't find any reference under
/etc/sane.d.
Is there a way to remove the old scanners from the command line ?
ssh -o stricthostkeychecking=no works.
There's no ~/.ssh/config
grep Strict /etc/ssh/ssh_config
# StrictHostKeyChecking ask
but it doesn't ask:
ssh new-gateway
@@@
@WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED! @
rpm -q gstreamer1-plugins-ugly
gstreamer1-plugins-ugly-1.14.4-2.fc29.x86_64
but:
sudo dnf upgrade
...
Dependencies resolved.
Problem: package gstreamer1-plugins-ugly-1.14.4-2.fc29.x86_64 requires
libx264.so.155()(64bit), but none of the providers can be installed
I'm using a newer
On 12/12/18 2:40 PM, Samuel Sieb wrote:
On 12/12/18 2:59 AM, Bill Shirley wrote:
It's been my experience that if you want udev to rename interfaces you
have to include in /etc/default/grub:
net.ifnames=0
on the kernel command line to prevent the auto rename that the kernel
does:
*",
ATTR{address}=="6c:f0:49:0a:1e:54", ATTR{dev_id}=="0x0",
ATTR{type}=="1", KERNEL=="eth*", NAME="lan4"
Bill
On 12/11/2018 9:10 PM, sean darcy wrote:
On 12/11/18 12:54 PM, Rick Stevens wrote:
On 12/11/18 8:52 AM, sean darcy wrote:
On
On 12/11/18 12:54 PM, Rick Stevens wrote:
On 12/11/18 8:52 AM, sean darcy wrote:
On 12/11/18 12:54 AM, Samuel Sieb wrote:
On 12/10/18 4:22 PM, sean darcy wrote:
I'm trying to get the interface on a multi-homed machine named
"internal"
ifconfig
enp1s0: flags=4099 mtu 1500
On 12/11/18 11:52 AM, sean darcy wrote:
On 12/11/18 12:54 AM, Samuel Sieb wrote:
On 12/10/18 4:22 PM, sean darcy wrote:
I'm trying to get the interface on a multi-homed machine named
"internal"
ifconfig
enp1s0: flags=4099 mtu 1500
ether 50:7b:9d:0b:8a:ab txqueuelen 1000
On 12/11/18 12:54 AM, Samuel Sieb wrote:
On 12/10/18 4:22 PM, sean darcy wrote:
I'm trying to get the interface on a multi-homed machine named "internal"
ifconfig
enp1s0: flags=4099 mtu 1500
ether 50:7b:9d:0b:8a:ab txqueuelen 1000 (Ethernet)
Is that the full ifcon
On 12/9/18 10:19 PM, Cameron Simpson wrote:
On 09Dec2018 18:33, sean darcy wrote:
My local server - unbound - works great. Never a problem, almost.
Sometimes there's a problem on reboot, and unbound doesn't start.
Do you know why this is? I run unbound on my Mac, but I start it by hand
post
I'm trying to get the interface on a multi-homed machine named "internal"
I have ifcfg-internal:
cat ifcfg-internal
# Please read /usr/share/doc/initscripts-*/sysconfig.txt
# for the documentation of these parameters.
TYPE=Ethernet
BOOTPROTO=none
DEVICE=internal
ONBOOT=yes
IPADDR=10.10.11.253
On 12/8/18 5:53 PM, Samuel Sieb wrote:
On 12/8/18 8:23 AM, sean darcy wrote:
I'm running a DNS server (unbound) on a VOIP server. It's crucial that
I can always resolve addresses, even if it's slower. Now DNS1 is set
to 127.0.0.1, peerdns no. Giving:
How does the local DNS do the resolving
On 12/8/18 1:08 PM, Matthew Miller wrote:
On Sat, Dec 08, 2018 at 11:58:18AM -0500, Sam Varshavchik wrote:
But who knows ? Maybe there is a memo.
I'd be shocked if there was any public discussion of this, anywhere.
Prepare to be shocked! We've talked about this quite a bit over the years.
On 12/7/18 9:27 PM, ToddAndMargo via users wrote:
Hi All,
What is this all about?
$ ifdown eno2
WARN : [ifdown] You are using 'ifdown' script provided by
'network-scripts', which are now deprecated.
WARN : [ifdown] 'network-scripts' will be removed from distribution
in near future.
FC28.
I'm running a DNS server (unbound) on a VOIP server. It's crucial that I
can always resolve addresses, even if it's slower. Now DNS1 is set to
127.0.0.1, peerdns no. Giving:
cat /etc/resolv.conf
# Generated by dnssec-trigger-script
nameserver 127.0.0.1
What I want is:
nameserver
On 11/24/18 1:34 PM, Oleg Cherkasov wrote:
On 24.11.2018 18:44, sean darcy wrote:
I'm trying to disable the spectre mitigations. I've set up
/etc/default/grub:
cat grub
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR="$(sed 's, release .*$,,g' /etc/system-release)"
GRUB_DEFAULT=saved
GRUB_DISAB
I'm trying to disable the spectre mitigations. I've set up
/etc/default/grub:
cat grub
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR="$(sed 's, release .*$,,g' /etc/system-release)"
GRUB_DEFAULT=saved
GRUB_DISABLE_SUBMENU=true
GRUB_TERMINAL_OUTPUT="console"
On 10/4/18 4:15 PM, sean darcy wrote:
Running Fedora 28 on Intel i5 8250U, UHD Graphics 620 (rev 07). Vulkan
is supposed to be supported.
mesa-vulkan-drivers-18.0.5-4.fc28.x86_64
vulkan-loader-1.1.77.0-4.fc28.x86_64
vulkan-tools-1.1.77.0-1.fc28.x86_64
But...
export VK_LOADER_DEBUG=all
Running Fedora 28 on Intel i5 8250U, UHD Graphics 620 (rev 07). Vulkan
is supposed to be supported.
mesa-vulkan-drivers-18.0.5-4.fc28.x86_64
vulkan-loader-1.1.77.0-4.fc28.x86_64
vulkan-tools-1.1.77.0-1.fc28.x86_64
But...
export VK_LOADER_DEBUG=all
vulkaninfo
DEBUG: Searching the following
Chrome os stable allows linux containers. The stock containers are
Debian. Is there a Fedora container ? And , if so, some ELI5
instructions on how to install it please.
Thanks,
sean
___
users mailing list -- users@lists.fedoraproject.org
To
On 08/27/2018 12:39 PM, stan wrote:
On Mon, 27 Aug 2018 11:09:29 -0400
sean darcy wrote:
Yes, the driver loads and the touchpad works. This bug is about the
driver not working, not warnings spamming the log.
OK, I thought that the driver wasn't working and spamming, not working
On 08/25/2018 04:39 PM, stan wrote:
On Sat, 25 Aug 2018 11:59:40 -0400
sean darcy wrote:
20+ times per _second_ syslog has:
i2c_hid i2c-ELAN0501:01: i2c_hid_get_input: incomplete report
(14/65535)
It makes it impossible to use journalctl. How do I get rid of this ?
So this is your touchpad
20+ times per _second_ syslog has:
i2c_hid i2c-ELAN0501:01: i2c_hid_get_input: incomplete report (14/65535)
It makes it impossible to use journalctl. How do I get rid of this ?
sean
___
users mailing list -- users@lists.fedoraproject.org
To
I want to start a systemd service (dhcpd) , but only if a link to the
internet is present. I don't want the service to start on boot.
systemctl start doesn't work unless the service is enabled.
This works, but it's very kludgy:
if
systemctl enable
systemctl start
systemctl disable
fi
New install of F27, with Xfce. startx fails without an error on the
console. Xorg.0.log has:
[ 2930.626] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 2930.626] (II) FBDEV: driver for framebuffer: fbdev
[ 2930.626] (II) VESA: driver for VESA chipsets: vesa
[ 2930.626]
Fedora 26. Xfce. Power Manager is set to Lock Screen when Plugged in if
laptop lid closed. And thatn works, does not suspend or hibernate. BUT,
NetworkManager is stopped. NM starts when the lid is opened.
How can I get NM to stay alive when I close the lid ?
sean
On 01/04/2018 12:01 PM, Matthew Miller wrote:
On Thu, Jan 04, 2018 at 05:49:15AM -0800, Jonathan Ryshpan wrote:
What do people know about Fedora vs. the Meltdown and Spectre bugs?
Mitigation for Meltdown is in place in the kernel updates we released
yesterday. (Thanks to kernel team, release
to start your system, you can
try to fix the problem according to second article.
Jaroslav
On Sat, Feb 25, 2017 at 3:11 PM, sean darcy <seandar...@gmail.com
<mailto:seandar...@gmail.com>> wrote:
On 02/25/2017 02:06 AM, Łukasz Posadowski wrote:
Data Fri, 24 Feb 2017 19
On F25, a server keeps losing its internet connection. I've now added a
cron.hourly script to restart NetworkManager. Is there a better way ?
Some way to tell NetworkManager that if the connection goes down, it
should try to bring it up every ___ seconds ?
sean
On 02/25/2017 02:06 AM, Łukasz Posadowski wrote:
Data Fri, 24 Feb 2017 19:19:58 -0500
sean darcy <seandar...@gmail.com> napisał(a):
thermal thermal_zone0: critical temperature reached(97 C),shutting
down ..
I'll fix the fan. But where do I go ? dnf system-upgrade reboot ? Or
sta
I'm trying to upgrade an older machine from F24 to F25. It failed
half-way through :
dnf[627]: Installing : kernel-core-4.9.10-200.fc25.x86_64
1079/3109
dnf[627]: Installing : kernel-modules-4.9.10-200.fc25.x86_64
1080/3109
thermal thermal_zone0: critical
I have an intel chip, and X has always used xorg-x11-drv-intel. But this
week's update of X defaults to the modesetting driver. Which is OK, but
it fails:
.
[114614.766] (II) Loading /usr/lib64/xorg/modules/libfb.so
[114614.767] (II) Module fb: vendor="X.Org Foundation"
1 - 100 of 250 matches
Mail list logo
