Just tried 4.3.99.901 (4.4.0 RC 1) and found that ATI Mach64 on my Sony
Laptop refuses to load X no matter whether I try it with old config
file, without it or newly created with XFree86 -configure
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open
Hi!
Is anyone else seeing the problem that Mozilla now renders glyphs in
iso10646-1 fonts which are not assigned (normally Mozilla scans
iso10646-1 encoded fonts for valid glyphs via looking at non-zero width
metrics and puts those glyphs into it's internal CCMap), e.g. the glyph
0 is
Roland Mainz wrote:
Is anyone else seeing the problem that Mozilla now renders glyphs in
iso10646-1 fonts which are not assigned (normally Mozilla scans
iso10646-1 encoded fonts for valid glyphs via looking at non-zero width
metrics and puts those glyphs into it's internal CCMap), e.g. the
On Fri, 12 Dec 2003, Roland Mainz wrote:
Hi!
Is anyone else seeing the problem that Mozilla now renders glyphs in
iso10646-1 fonts which are not assigned (normally Mozilla scans
iso10646-1 encoded fonts for valid glyphs via looking at non-zero width
metrics and puts those glyphs
On Fri, 12 Dec 2003, Andriy Rysin wrote:
Just tried 4.3.99.901 (4.4.0 RC 1) and found that ATI Mach64 on my Sony
Laptop refuses to load X no matter whether I try it with old config
file, without it or newly created with XFree86 -configure
Looks like I have an off-by-one error there. Please
This changes the configuration, only for Debian, such that the manpages end
up in the right places with the right names. I would be wonderful if this
could be committed so this happens automatically for people compiling on
Debian.
Also, is there any chance of that documentation patch I put on the
Dr Andrew C Aitchison wrote:
Is anyone else seeing the problem that Mozilla now renders glyphs in
iso10646-1 fonts which are not assigned (normally Mozilla scans
iso10646-1 encoded fonts for valid glyphs via looking at non-zero width
metrics and puts those glyphs into it's internal CCMap),
Hello.
There have been some recent fixes to a couple of via problem that has not
gone into CVS. More specifically
Bugzilla 525 patches 770 857
Bugzilla 945
These patches have been tested and discussed quite extensively on the
viaarena forums and seem to work well.
Would be good to have them
I was messing around with the Debian packages a that are in the 4.3.0 Debian
packages and trying to apply them to 4.3.901. I came across one that
applied that I thought was already done. Does DPMS on ati radeon work in
the 4.3.901? I could not find the bug in bugzilla that used to be
associated
you will lose 10 pounds in 12 days guaranteed with procitravin. Chemical
free, epherda free with no shakes or jitters. Natural weight loss
guaranteed to work or your money back!
http://www.procitravin.com/index11.html
protectorate :)yxvfpfsl k
ae jkht
mcpn
you will lose 10 pounds in 12 days guaranteed with procitravin. Chemical
free, epherda free with no shakes or jitters. Natural weight loss
guaranteed to work or your money back!
http://www.procitravin.com/index11.html
protectorate :)yxvfpfsl k
ae jkht
mcpn
I make utf8 text file for test. It contains utf8-encoded
ksx1001(ksc5601) chars. When I convert it to EUC-KR with iconv, no
conversion error occur.
On X environment, I made TextProperty from Xutf8TextListToTextProperty
and I converted the generated text property to the TextList by calling
Ivan,
first of all, thanks for your patience helping and teaching me about the
new scheme of xkb.
I am sending this mail in PVT to you because I am not sure if it is
off-topic in the i18n list. If you think it is interesting to the list,
please answer in the list.
Or you can just send this
hi all,
last week i compiledinstalled xfree 4.3.99.901 on my gentoo 1.4 machine
to test the new sis dri driver included( i have a sis 630 graphics
card). but when i try to startx glxgears the whole machine crashes.
glxinfo reports direct rendering to be correctly enabled. i think the
problem
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
latest CVS generates this error on my machine:
make[3]: Entering directory `/home/mb/xfree_CVS/xc.build/lib/dps'
checking ../../config/pswrap/pswrap over in ../../config/pswrap first...
make[4]: Entering directory
We use Mandrake 9.2 (kernel 2.4.22) and the last i810 drivers.
we can't get a resolution more than 640x480 under linux but everything
runs OK under windows XP.
We try to check the Xf86Config-4 : Mandrake set the display subsection
as VIRTUAL and get then a virtual desk of 1024x768. We set the
This is only to pass on info regarding CHAINTECH SUMMIT motherboard with
integrated nvidia nforse video chip and how they work with 9.0 Mandrake.
They work great. Great definition and clarity. On first attempt to
configure
X Server Monitor and Resolution I played with all these settings and
Hello,
Am Freitag, 12. Dezember 2003 15:17 schrieb Steve:
hi all,
last week i compiledinstalled xfree 4.3.99.901 on my gentoo 1.4 machine
to test the new sis dri driver included( i have a sis 630 graphics
card). but when i try to startx glxgears the whole machine crashes.
glxinfo reports
Hi,
i'm new to Xserver but i've check around and can't find what's wrong with my system.
I'm trying to get x to work with the xwin32 client on my pc.
X work well on the console.
After setting my display, i type startx and i get:
[EMAIL PROTECTED] oracle]$ startx
Fatal server error:
PAM
Hello!!!
I have a problem with Xvfb. Because my XFree86 is running in screen 0.
The Xvfb too.
I need changed Xfree86 at other number
Is it possible? What I can do it?
Sincerelly
___
XFree86 mailing list
[EMAIL PROTECTED]
Top Rated Online Store.
Rated #1 for online service!
HOT NEW - Levitra/Lipitor/Nexium
Weekly speciasls on all our drugs.
-Zocor
-Soma
-Ambien
-Phentermine
-V1agra
-Discount Generic's on ALL
-MORE
Next day discrete shipping on all products!
http://www.rxmoreusa.com/shopping
Hi,
is it possible to get this combination to work? I googled around, but
couldn't find a working configuration (modlines, ...). The display seems to
be recognized, but nothing is displayed.
Please help! :)
--
On Fri, 2003-12-12 at 07:22, Michael Schreckenbauer wrote:
Hello,
Am Freitag, 12. Dezember 2003 15:17 schrieb Steve:
hi all,
last week i compiledinstalled xfree 4.3.99.901 on my gentoo 1.4 machine
to test the new sis dri driver included( i have a sis 630 graphics
card). but when i try
I have Synmaster 213T and a Radeon ATI graphics card. I cannot get the
XFree86 working. I have played around a bit with the config files by
doing XFree86 -configure as the starting point and I am still not able
to get it to work.
Thanks for any tips.
Thanks
Ramesh
Is your DISPLAY environment variable set to something bad?
You should probably set it to :0.0. This really sounds more
like a problem with your shell than with anything server related.
Mark.
On Fri, 12 Dec 2003, [iso-8859-1] Ivan Todorov wrote:
Can anyone tell me
Yes, it should work. I assume you are using the nv driver that
came with XFree86 4.3. A modeline like the following should work.
Modeline 1920x1200 193.16 1920 2048 2256 2592 1200 1201 1204 1242
XFree86 4.3 has some autodetection problems (the 4.4 pre-releases
are better in this
Programa de Control de Flujos de Dinero
Valor oferta $ 45.000 + iva contado
llamar al fono 09-499 59 36
envio a provincia por correo certificado
solicite su demostrativo
1.- Control Bancario Completo
a.- Cartolas bancarias
b.- Cartolas reales
c.- Cheques a fecha
d.- Control chequera
thx for your help! it works now if i disable agp...
thx for your work eric! :)
steve
___
XFree86 mailing list
[EMAIL PROTECTED]
http://XFree86.Org/mailman/listinfo/xfree86
hi
I'm using xfree86 4.3 under freebsd 5.1. Everything was working perfectly
until a blackout; now the keyboard doesn't work properly when I'm running X
server as user (no accents or any other special characters) while as root, or
text console in both cases, everything is fine. Seems a
you will lose 10 pounds in 12 days guaranteed with procitravin. Chemical
free, epherda free with no shakes or jitters. Natural weight loss
guaranteed to work or your money back!
http://www.procitravin.com/index11.html
protectorate :)yxvfpfsl k
ae jkht
mcpn
Are interested in Working Full time at home?
If so just take one moment to see how you can start today.
http://www.ecom-universe.net/splash1/FF.htm
- No cold calling - No sales calls
- Put your computer to work
- No Boring Meetings to Attend.
- A Simple Turnkey System.
- You Can Earn Money
Title: Plan 2004
32 matches
Mail list logo