Hi there!
I've a Sun Ultra1 I'm trying to use, and everything works just fine, except My
mouse will only move horizontally in X. I can't move it vertically. I've double
checked with both my pads, and the same thing happens. Does anyone have a
suggestion to fix this? I've started xdm via rc.conf according to the
unaccelerated display instructions in the README.
Dmesg below.
~Donald
console is keyboard/display
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2011 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 5.0 (GENERIC) #36: Wed Aug 17 10:13:34 MDT 2011
dera...@sparc64.openbsd.org:/usr/src/sys/arch/sparc64/compile/GENERIC
real mem = 335544320 (320MB)
avail mem = 317857792 (303MB)
mainbus0 at root: Sun Ultra 1 SBus (UltraSPARC 143MHz)
cpu0 at mainbus0: SUNW,UltraSPARC (rev 4.0) @ 142.984 MHz
cpu0: physical 16K instruction (32 b/l), 16K data (32 b/l), 512K external (64 b/
l)
timer0 at mainbus0 addr 0xfffc7c00 ivec 0x7f0, 0x7f1
sbus0 at mainbus0 addr 0xfffcc000: clock = 25 MHz
sbus0: dvma map ff800000-ffffffff, STC0 enabled
audiocs0 at sbus0 slot 13 offset 0xc000000 vector 24 ipl 8
audio0 at audiocs0
auxio0 at sbus0 slot 15 offset 0x1900000
"flashprom" at sbus0 slot 15 offset 0x0 not configured
fdc0 at sbus0 slot 15 offset 0x1400000 vector 29 ipl 11 softpri 4
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
clock1 at sbus0 slot 15 offset 0x1200000: mk48t59
zs0 at sbus0 slot 15 offset 0x1100000 vector 28 ipl 12 softpri 6
zstty0 at zs0 channel 0
zstty1 at zs0 channel 1
zs1 at sbus0 slot 15 offset 0x1000000 vector 28 ipl 12 softpri 6
zskbd0 at zs1 channel 0: layout 34
wskbd0 at zskbd0: console keyboard
zsms0 at zs1 channel 1
wsmouse0 at zsms0 mux 0
uperf0 at sbus0 slot 15 offset 0x1300000: model SUNW,sc-up (0/0) ports 3
"SUNW,pll" at sbus0 slot 15 offset 0x1304000 not configured
esp0 at dma0 slot 14 offset 0x8800000 vector 20 ipl 3: ESP200, 40MHz
scsibus0 at esp0: 8 targets, initiator 7
sd0 at scsibus0 targ 0 lun 0: SCSI2 0/direct fixed
sd0: 17366MB, 512 bytes/sector, 35566480 sectors
sd1 at scsibus0 targ 2 lun 0: SCSI2 0/direct f
ixed
sd1: 2048MB, 512 bytes/sector, 4194685 sectors
cd0 at scsibus0 targ 6 lun 0: SCSI2 5/cdrom re
movable
ledma0 at sbus0 slot 14 offset 0x8400010: dma rev 2
le0 at ledma0 slot 14 offset 0x8c00000 vector 21 ipl 6: address 08:00:20:85:8d:6
0
le0: 8 receive buffers, 2 transmit buffers
bpp0 at sbus0 slot 14 offset 0xc800000 vector 22 ipl 2: dma rev 2
cgsix0 at sbus0 slot 2 offset 0x0 vector 5 ipl 5: SUNW,501-2325, 1152x900, rev 1
1
wsdisplay0 at cgsix0 mux 1: console (std, sun emulation), using wskbd0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
bootpath: /sbus@1f,0/espdma@e,8400000/esp@e,8800000/sd@0,0
root on sd0a swap on sd0b dump on sd0b
