Hi Kaitlyn, 
 
I can't reproduce this with our test examples. Could you please post at 
least your updated calibrator definitions (or better even attach a minimal 
failing scenario to run in sumo)?
 
Best regards
Mirko
 
 
 
 
-----Original-Nachricht-----
Betreff: Re: [sumo-user] Calibrators Not Spawning
Datum: 2024-04-11T17:48:22+0200
Von: "Kaitlyn Liu" <liu.kaitl...@gmail.com>
An: "Mirko Barthauer" <m.bartha...@t-online.de>
 
 
 
 
Just realized I didn’t reply to the mailing list, so resending my previous 
message.
 
Thanks for the response! I added the flow end attribute and cars are 
spawning now, however I can't seem to extend the end past 3600 seconds. 
Whenever I try to do so, the calibrators won't spawn cars. What should I do 
if I want to make the simulation last for longer than an hour?
 
Thanks,
Kaitlyn


    On Apr 10, 2024, at 5:10 PM, Kaitlyn Liu <liu.kaitl...@gmail.com>
    wrote:


    Hi Mirko,
     
    Thanks for the response. I added the flow end attribute and cars are
    spawning now, however I can't seem to extend the end past 3600 seconds.
    Whenever I try to do so, the calibrators won't spawn cars. What should
    I do if I want to make the simulation last for longer than an hour?
     
    Thanks,
    Kaitlyn

    On Wed, Apr 10, 2024 at 12:36 PM Mirko Barthauer <
    m.bartha...@t-online.de <mailto:m.bartha...@t-online.de> > wrote:
      Hi Kaitlyn,
       
      what happens if you add the flow end attribute? Judging from the
      source code, I think this can be a problem because the flow duration
      is undefined / set to 0.
       
      Best regards
      Mirko
       
       
       
      -----Original-Nachricht-----
      Betreff: [sumo-user] Calibrators Not Spawning
      Datum: 2024-04-10T17:50:37+0200
      Von: "Kaitlyn Liu via sumo-user" <sumo-user@eclipse.org
      <mailto:sumo-user@eclipse.org> >
      An: "sumo-user@eclipse.org <mailto:sumo-user@eclipse.org> " <
      sumo-user@eclipse.org <mailto:sumo-user@eclipse.org> >
       
       
       
      Hello,
       
      I am currently trying to insert calibrators into my simulation but
      the calibrators do not seem to be spawning in with both a manual
      route (ca_3) or a route probe (ca_0-2). I have the following
      additional file:
       
        <additional xmlns:xsi="<http://www.w3.org/2001/XMLSchema-instance> 
        " xsi:noNamespaceSchemaLocation="
        <http://sumo.dlr.de/xsd/additional_file.xsd> ">
            <!-- RouteProbes -->
            <vType id="spawned_car" vClass="passenger" color="1,1,1"/>
            <routeProbe id="rp_0" begin="0.00" period="20.00"
        edge="28727103#0" file="rp_0.xml"/>
            <routeProbe id="rp_1" begin="0.00" period="20.00"
        edge="625479007#6" file="rp_1.xml"/>
            <routeProbe id="rp_2" begin="0.00" period="20.00"
        edge="-292851770#0" file="rp_2.xml"/>
            <routeProbe id="rp_3" begin="0.00" period="20.00"
        edge="-966308107#4" file="rp_3.xml"/>
           
            <route id="r_0" edges="-966308107#4 -28727096#5 -28727096#1
        625479007#0 625479007#1 625479007#3 625479007#6 926031003#0
        11956345 926031004#0 -11734068#2" color="red"/>
            <route id="r_1" edges="-966308107#4 11826990#0 11826990#2
        11826990#3 265895120#0 28727103#0 28727103#4 11834237#0 11834237#1
        625479007#0 625479007#1 625479007#3 625479007#6 11737884#0"
        color="green"/>
            <route id="r_2" edges="-625851681#2 -28727096#5 -28727096#1
        625479007#0 625479007#1 625479007#3 625479007#6 11737884#0"
        color="green"/>
            <route id="r_3" edges="-966308107#4 -28727096#5 -28727096#1
        625479007#0 625479007#1 625479007#3 625479007#6 11737884#0"/>
            <route id="r_4" edges="-625851681#2 -28727096#5 -28727096#1
        625479007#0 625479007#1 625479007#3 625479007#6 926031003#0
        11956345 926031004#0 -11734068#2" color="blue"/>
            <route id="r_5" edges="-625851681#2 11826990#0 11826990#2
        11826990#3 265895120#0 28727103#0 28727103#4 11834237#0 11834237#1
        625479007#0 625479007#1 625479007#3 625479007#6 11737884#0"
        color="blue"/>
            <route id="r_6" edges="-625851681#2 11826990#0 11826990#2
        11826990#3 265895120#0 -320455187#3 -24864540#7 -335532208#1
        335532207#0 11729090#0 11729090#1 335532206 54964356#0"
        color="blue"/>
            <route id="r_7" edges="-966308107#4 11826990#0 11826990#2
        11826990#3 265895120#0 -320455187#3 -24864540#7 -335532208#1
        335532207#0 11729090#0 11729090#1 335532206 54964356#0"
        color="blue"/>
            <route id="r_8" edges="-11826990#1 11960711#0 -294921088#6
        1121515071" color="blue"/>
            <route id="r_9" edges="-11826990#1 625851681#0 625361998#0
        625361998#1 625361998#4 625361998#5 292851770#0 292851770#1
        292851770#7" color="blue"/>
            <route id="r_10" edges="-11826990#1 -28727096#5 -28727096#1
        625479007#0 625479007#1 625479007#3 625479007#6 11737884#0"
        color="blue"/>
            <route id="r_11" edges="-11826990#1 -28727096#5 -28727096#1
        625479007#0 625479007#1 625479007#3 625479007#6 926031003#0
        11956345 926031004#0 -11734068#2" color="blue"/>
            <route id="r_12" edges="28727096#2 11826990#0 11826990#2
        11826990#3 265895120#0 -320455187#3 -24864540#7 -335532208#1
        335532207#0 11729090#0 11729090#1 335532206 54964356#0"/>
            <route id="r_13" edges="28727096#2 625851681#0 625361998#0
        625361998#1 625361998#4 625361998#5 292851770#0 292851770#1
        292851770#7"/>
            <route id="r_14" edges="28727096#2 11960711#0 -294921088#6
        -294921088#4 320948882#0"/>
            <route id="r_15" edges="28727096#2 625851681#0 625361998#0
        625361998#1 625361998#4 625361998#5 11837579#0 11837579#3
        335532207#0 11729090#0 11729090#1 335532206 54964356#0"/>

            <!-- Calibrators -->
            <calibrator id="ca_1" edge="625479007#6" pos="0.00"
        routeProbe="rp_1">
                <flow begin="0.00" departPos="free" departSpeed="max"
        speed="27.80" vehsPerHour="600.00"/>
            </calibrator>
            <calibrator id="ca_0" edge="28727103#0" pos="0.00"
        routeProbe="rp_0">
                <flow begin="0.00" departPos="free" departSpeed="max"
        speed="27.80" vehsPerHour="1000.00"/>
            </calibrator>
            <calibrator id="ca_2" edge="-292851770#0" pos="0.00"
        routeProbe="rp_2">
                <flow begin="0.00" departPos="free" departSpeed="max"
        speed="27.80" vehsPerHour="600.00"/>
            </calibrator>
            <calibrator id="ca_3" edge="-966308107#4" pos="0.00"
        output="ca_3.xml">
                <flow begin="0.00" departPos="free" departSpeed="max"
        speed="27.80" route="r_0" vehsPerHour="100.00" period="5"/>
            </calibrator>

            <!-- Detectors -->
            <laneAreaDetector id="0" lane="28727096#2_0" pos="70.00"
        length="49.00" tl="GS_105097632" file="LAD_output"/>
            <laneAreaDetector id="1" lane="28727096#2_1" pos="70.00"
        length="49.00" tl="GS_105097632" file="LAD_output"/>
            <laneAreaDetector id="2" lane="-625851681#2_0" pos="80.00"
        length="49.00" tl="GS_105097632" file="LAD_output"/>
            <laneAreaDetector id="3" lane="-625851681#2_1" pos="80.00"
        length="49.00" tl="GS_105097632" file="LAD_output"/>
            <laneAreaDetector id="4" lane="-966308107#4_0" pos="285.00"
        length="49.00" tl="GS_105097632" file="LAD_output"/>
            <laneAreaDetector id="5" lane="-11826990#1_0" pos="5.00"
        length="40.00" tl="GS_105097632" file="LAD_output"/>
        </additional>
       
      These are my configs for traci: 
         traci.start(
              [
                  sumoBinary,
                  '--net-file', 'simulation/network.net.xml',
                  '--route-files', 'simulation/passenger.trips.xml',
                  '--delay', '1000',
                  '--gui-settings-file', 'simulation/view.xml',
                  '--additional-files', 'simulation/additional.add.xml',
                  '--max-depart-delay', '20',
                  '--extrapolate-departpos',
                  '--start'
              ])
       
      I was wondering if anyone has any idea what could be going wrong.
       
      Thanks,
      Kaitlyn

 


_______________________________________________
sumo-user mailing list
sumo-user@eclipse.org
To unsubscribe from this list, visit 
https://www.eclipse.org/mailman/listinfo/sumo-user

Reply via email to