Dibou wrote: > From Bugzilla http://bugs.slimdevices.com/show_bug.cgi?id=12997 > > > On lirc.org you also can find how to use a Linux or Windows machine > (and some > > simple hardware) to record proper .conf file in NEC or RC5 format. > > I tried to proceed as proposed. But unfortunately my remote control was > not referenced in LIRC database. So I installed WinLIRC in order to > record its codes. > > I had to build an IR receiver (I welt components by myself!). I even had > to find a serial DB9 bracket, because it was not provided with my > motherboard. I did all that and it ran! I did it! I managed to record my > RC codes with the IRRecord tool provided in the WinLIRC package. > > Then I got a .conf file that I tried with my old SB3 (replacing the old > RAW one I recorded a long time ago with the IRBlast learning tool) and > it ran. > > Then I tried it on my SBTouch and... and... it does not run... not at > all. Arghhh... So much work for such a poor result! > > There might be a link with the mandatory RC5 / NEC format. This line is > the .conf file generated by the LIRC IRRecord tool: > "flags SPACE_ENC|CONST_LENGTH" > > I found templates here http://lirc.sourceforge.net/remotes/generic/ > > For RC5 conf files, it seems that it should be "flags RC5|CONST_LENGTH". > But in NEC conf files, the line is the same as mine. > > The IR emitter is the one I used with my SB3, it was running perfectly > (an IR emitting LED + a resistance / a 3.5 jack at the other end) > > > Any idea?
Hello ! I think I have the same issue as Dibou, I used to use the IR Blaster plugin with a Squeezebox Touch and a Denon receiver (RC5) and it worked really well. I have changed my receiver to a Emotiva UMC-1, since the LIRC site didn't have the conf, I generate one from WinLIRC, I tested it with the SqueezeIR plugin for the Controller and it works fine. It seems to be using the NEC protocol but not in the same way as the template available on lirc site, here how it begins: name UMC-1 bits 16 flags SPACE_ENC eps 30 aeps 100 header 9015 4403 one 596 1643 zero 596 519 ptrail 576 repeat 8967 2212 pre_data_bits 16 pre_data 0x4FA gap 41182 repeat_gap 600445 toggle_bit_mask 0x0 It is recognized by the plugin, but it doesn't seem to blast anything, is there an error in the conf file, or this type of remote does not use NEC protocol and thus is incompatibe with the plugin ? Thank you for your help ! Regards ------------------------------------------------------------------------ giantpopples's Profile: http://forums.slimdevices.com/member.php?userid=42798 View this thread: http://forums.slimdevices.com/showthread.php?t=74938
_______________________________________________ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch