Triode wrote: > The internal processing of usb audio is likely to be 24 bits for all > cases and will fill the lower 8 bits with 0s. However if you have > replay gain enabled or the volume set to less than 100% then the bits > may be altered by the gain setting and this will alter all 24 bits. Some > Dacs such as the Audiolab MDAC monitor the number of bits which are > changing and use this for the bit depth - people notice that the dac > reads 44/16 at 100% volume and then it changes to 44/24 if you change > the volume. Is this the case for you, or perhaps the dac is just > measuring that there are 24bits per sample being received.
OK Triode. Just ran the Touch at full volume, and sure enough, it read 44/16. Throttled down to 90% and it read 44/24. Thanks again. Guido F. ------------------------------------------------------------------------ guidof's Profile: http://forums.slimdevices.com/member.php?userid=40448 View this thread: http://forums.slimdevices.com/showthread.php?t=94512 _______________________________________________ Touch mailing list Touch@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/touch