Hi Philipp, > A summary of improvements and fixes is below. > > Thanks, > Philipp. > > > The following changes since commit 6d4a3ff2649faa2cf2739e332557f256cc34831e: > > Merge branch 'master' of git://git.denx.de/u-boot-socfpga (2018-11-29 > 16:36:53 -0500) > > are available in the git repository at: > > git://git.denx.de/u-boot-rockchip.git tags/for-master-20181130 > > for you to fetch changes up to 17e5f3a4265cf372c4e09d7d3fd09fa54ef413cb: > > rockchip: rk3188: use board_debug_uart_init() for UART io init (2018-11-30 > 22:00:11 +0100) > > ---------------------------------------------------------------- > Improvements: > - RK3188 USB-UART functionality > - errors triggering a hard-stop in SPL on the RK3399 are reported > - Rockchip RV1108 (SoC) support > - MicroCrystal RV3029 (RTC) DM driver
Is there a reason why the Rock960/Ficus series [1] wasn't pulled in? You had said it was high up on your list [2] for this merge window. Peter [1] https://lists.denx.de/pipermail/u-boot/2018-September/342174.html [2] https://lists.denx.de/pipermail/u-boot/2018-October/345806.html > Fixes: > - RK3188 early UART setup > - limit SD-card frequency to 40MHz on the RK3399-Q7 > - MIPI fixes > - RK3399 CPUB clock initialisation > > ---------------------------------------------------------------- > Christoph Muellner (1): > rockchip: rk3399: Initialize CPU B clock. > > Heiko Stuebner (2): > rockchip: rk3188: add support for usb-uart functionality > rockchip: rk3188: fix early uart setup > > Kever Yang (2): > rockchip: rock: remove TPL_TINY_MEMSET > rockchip: rk3188: use board_debug_uart_init() for UART io init > > Otavio Salvador (6): > ARM: rockchip: rv1108: Sync clock with vendor tree > ARM: rockchip: rv1108: Enable BOUNCE_BUFFER > ARM: dts: rockchip: Add rv1108 eMMC pinctrl > ARM: rockchip: rv1108: Add a board_usb_init for USB OTG > ARM: dts: rockchip: Add rv1108 USB OTG pinctrl > ARM: rockchip: rv1108: Add support for default distro_bootcmd > > Philipp Tomsich (4): > rockchip: rk3399: spl: always report errors triggering a hard stop > rockchip: rk3399-puma: reduce sd card max-frequency to 40MHz > rtc: rv3029: add to Kconfig > rtc: rv3029: update to support DM and sync with Linux 4.17 > > Richard Röjfors (2): > rockchip: video: mipi: Do not write to the version register > rockchip: video: mipi: Fix phy frequency setting > > arch/arm/dts/rk3399-puma.dtsi | 2 +- > arch/arm/dts/rv1108.dtsi | 74 +++++++++++++- > arch/arm/include/asm/arch-rockchip/clock.h | 6 ++ > arch/arm/include/asm/arch-rockchip/cru_rk3399.h | 22 +++- > arch/arm/include/asm/arch-rockchip/cru_rv1108.h | 144 > +++++++++++++++++++++++++- > arch/arm/include/asm/arch-rockchip/grf_rk3188.h | 42 ++++++++ > arch/arm/mach-rockchip/Kconfig | 9 ++ > arch/arm/mach-rockchip/Makefile | 1 + > arch/arm/mach-rockchip/rk3188-board-spl.c | 49 +++++++-- > arch/arm/mach-rockchip/rk3399-board-spl.c | 4 +- > arch/arm/mach-rockchip/rv1108-board.c | 81 +++++++++++++++ > configs/rock_defconfig | 1 - > drivers/clk/rockchip/clk_rk3399.c | 79 +++++++++++++-- > drivers/clk/rockchip/clk_rv1108.c | 475 > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-- > drivers/rtc/Kconfig | 10 ++ > drivers/rtc/rv3029.c | 580 > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++------------------------- > drivers/video/rockchip/rk_mipi.c | 4 +- > include/configs/evb_rv1108.h | 3 + > include/configs/rv1108_common.h | 18 ++++ > include/dt-bindings/clock/rv1108-cru.h | 137 > ++++++++++++++++++++----- > scripts/config_whitelist.txt | 1 - > 21 files changed, 1542 insertions(+), 200 deletions(-) > create mode 100644 arch/arm/mach-rockchip/rv1108-board.c > > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > https://lists.denx.de/listinfo/u-boot _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot