On 2024/4/9 02:14, Jonas Karlman wrote:
Like other Rockchip SoCs the RK3308 has cpu id programmed into OTP memory. The rockchip_otp driver already support the RK3308 variant. However, the device tree is missing a node to enable use of OTP. Add the missing otp node to soc u-boot.dtsi, enable the rockchip_otp driver and enable use of misc_init_r() to set ethaddr based on cpu id. Signed-off-by: Jonas Karlman <jo...@kwiboo.se>
Reviewed-by: Kever Yang <kever.y...@rock-chips.com> Thanks, - Kever
--- v2: Add clocks and resets props --- arch/arm/dts/rk3308-u-boot.dtsi | 16 ++++++++++++++++ arch/arm/mach-rockchip/Kconfig | 3 +++ 2 files changed, 19 insertions(+) diff --git a/arch/arm/dts/rk3308-u-boot.dtsi b/arch/arm/dts/rk3308-u-boot.dtsi index db2c20a7055e..436f66d1b87d 100644 --- a/arch/arm/dts/rk3308-u-boot.dtsi +++ b/arch/arm/dts/rk3308-u-boot.dtsi @@ -10,6 +10,22 @@ mmc0 = &emmc; mmc1 = &sdmmc; }; + + otp: nvmem@ff210000 { + compatible = "rockchip,rk3308-otp"; + reg = <0x0 0xff210000 0x0 0x4000>; + clocks = <&cru SCLK_OTP_USR>, <&cru PCLK_OTP_NS>, + <&cru PCLK_OTP_PHY>; + clock-names = "otp", "apb_pclk", "phy"; + resets = <&cru SRST_OTP_PHY>; + reset-names = "phy"; + #address-cells = <1>; + #size-cells = <1>; + + cpu_id: id@7 { + reg = <0x07 0x10>; + }; + }; };&cru {diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index 71c5945b5742..6e07a70bf4ae 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -163,7 +163,10 @@ config ROCKCHIP_RK3308 imply ARMV8_CRYPTO imply ARMV8_SET_SMPEN imply LEGACY_IMAGE_FORMAT + imply MISC + imply MISC_INIT_R imply ROCKCHIP_COMMON_BOARD + imply ROCKCHIP_OTP imply SPL_CLK imply SPL_FIT_SIGNATURE imply SPL_RAM
