So there are two things to test with that new bridge-utils:
 1) Bridge interface with bridge-ports set instead of bridge_ports works too
 2) Bridging a non-existing vlan interface will now create it

These two are in the udev hooks, so need to be tested by creating a
network interface, like a tap device (using uml-utilities to create it).

Test for 1)
 - Make sure uml-utilities and bridge-utils are both installed
 - Add the following entry to /etc/network/interfaces:
auto br0
iface br0 inet static
    address 192.168.1.1
    netmask 255.255.255.0
    bridge-ports eth9
 - Create the tap device: tunctl -t eth9
 - Check that the bridge has been created and the interface added to it (bridge 
shouldn't have an IP configuration at this point):
root@castiana:~# brctl show br0
bridge name     bridge id               STP enabled     interfaces
br0             8000.1a6bffdb2551       no              eth9

The previous release wouldn't do anything unless you were using
bridge_ports.


Test for 2)
 - Make sure uml-utilities, bridge-utils and vlan are all intalled
 - Add the following entry to /etc/network/interfaces:
auto br0
iface br0 inet static
    address 192.168.1.1
    netmask 255.255.255.0
    bridge-ports eth9.1010
 - Create the tap device: tunctl -t eth9
 - Check that the bridge has been created and the interface added to it (bridge 
shouldn't have an IP configuration at this point):
root@castiana:~# brctl show br0
bridge name     bridge id               STP enabled     interfaces
br0             8000.06c2192d61ab       no              eth9.1010

The previous release would create the bridge but not add the port to it
as the tag interface wouldn't exist.


Between each test, cleanup with:
 - tunctl -d eth9
 - ifconfig br0 down
 - brctl delbr br0

The use of eth9 instead of tap0 is done on purpose as the vlan script
explicitly checks for interfaces with eth, bond or wlan in their name.

-- 
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to bridge-utils in Ubuntu.
https://bugs.launchpad.net/bugs/889423

Title:
  802.3ad bonding not configured correctly

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/bridge-utils/+bug/889423/+subscriptions

-- 
Ubuntu-server-bugs mailing list
Ubuntu-server-bugs@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs

Reply via email to