Not many that i know of, but i bumped into this one https://issues.apache.org/jira/browse/SPARK-4516
Thanks Best Regards On Thu, Feb 26, 2015 at 3:26 PM, Victor Tso-Guillen <v...@paxata.com> wrote: > Is there any potential problem from 1.1.1 to 1.2.1 with shuffle > dependencies that produce no data? > > On Thu, Feb 26, 2015 at 1:56 AM, Victor Tso-Guillen <v...@paxata.com> > wrote: > >> The data is small. The job is composed of many small stages. >> >> * I found that with fewer than 222 the problem exhibits. What will be >> gained by going higher? >> * Pushing up the parallelism only pushes up the boundary at which the >> system appears to hang. I'm worried about some sort of message loss or >> inconsistency. >> * Yes, we are using Kryo. >> * I'll try that, but I'm again a little confused why you're recommending >> this. I'm stumped so might as well? >> >> On Wed, Feb 25, 2015 at 11:13 PM, Akhil Das <ak...@sigmoidanalytics.com> >> wrote: >> >>> What operation are you trying to do and how big is the data that you are >>> operating on? >>> >>> Here's a few things which you can try: >>> >>> - Repartition the RDD to a higher number than 222 >>> - Specify the master as local[*] or local[10] >>> - Use Kryo Serializer (.set("spark.serializer", >>> "org.apache.spark.serializer.KryoSerializer")) >>> - Enable RDD Compression (.set("spark.rdd.compress","true") ) >>> >>> >>> Thanks >>> Best Regards >>> >>> On Thu, Feb 26, 2015 at 10:15 AM, Victor Tso-Guillen <v...@paxata.com> >>> wrote: >>> >>>> I'm getting this really reliably on Spark 1.2.1. Basically I'm in local >>>> mode with parallelism at 8. I have 222 tasks and I never seem to get far >>>> past 40. Usually in the 20s to 30s it will just hang. The last logging is >>>> below, and a screenshot of the UI. >>>> >>>> 2015-02-25 20:39:55.779 GMT-0800 INFO [task-result-getter-3] >>>> TaskSetManager - Finished task 3.0 in stage 16.0 (TID 22) in 612 ms on >>>> localhost (1/5) >>>> 2015-02-25 20:39:55.825 GMT-0800 INFO [Executor task launch worker-10] >>>> Executor - Finished task 1.0 in stage 16.0 (TID 20). 2492 bytes result sent >>>> to driver >>>> 2015-02-25 20:39:55.825 GMT-0800 INFO [Executor task launch worker-8] >>>> Executor - Finished task 2.0 in stage 16.0 (TID 21). 2492 bytes result sent >>>> to driver >>>> 2015-02-25 20:39:55.831 GMT-0800 INFO [task-result-getter-0] >>>> TaskSetManager - Finished task 1.0 in stage 16.0 (TID 20) in 670 ms on >>>> localhost (2/5) >>>> 2015-02-25 20:39:55.836 GMT-0800 INFO [task-result-getter-1] >>>> TaskSetManager - Finished task 2.0 in stage 16.0 (TID 21) in 674 ms on >>>> localhost (3/5) >>>> 2015-02-25 20:39:55.891 GMT-0800 INFO [Executor task launch worker-9] >>>> Executor - Finished task 0.0 in stage 16.0 (TID 19). 2492 bytes result sent >>>> to driver >>>> 2015-02-25 20:39:55.896 GMT-0800 INFO [task-result-getter-2] >>>> TaskSetManager - Finished task 0.0 in stage 16.0 (TID 19) in 740 ms on >>>> localhost (4/5) >>>> >>>> [image: Inline image 1] >>>> What should I make of this? Where do I start? >>>> >>>> Thanks, >>>> Victor >>>> >>> >>> >> >