Re-sending as I don't see my post on the thread.
On Sun, May 1, 2016 at 4:21 PM, Nikhil Utane
<nikhil.subscri...@gmail.com <mailto:nikhil.subscri...@gmail.com>> wrote:
Hi,
Looking for some guidance here as we are completely blocked
otherwise :(.
-Regards
Nikhil
On Fri, Apr 29, 2016 at 6:11 PM, Sriram <sriram...@gmail.com
<mailto:sriram...@gmail.com>> wrote:
Corrected the subject.
We went ahead and captured corosync debug logs for our ppc board.
After log analysis and comparison with the sucessful logs(
from x86 machine) ,
we didnt find *"[ MAIN ] Completed service synchronization,
ready to provide service.*" in ppc logs.
So, looks like corosync is not in a position to accept
connection from Pacemaker.
Even I tried with the new corosync.conf with no success.
Any hints on this issue would be really helpful.
Attaching ppc_notworking.log, x86_working.log, corosync.conf.
Regards,
Sriram
On Fri, Apr 29, 2016 at 2:44 PM, Sriram <sriram...@gmail.com
<mailto:sriram...@gmail.com>> wrote:
Hi,
I went ahead and made some changes in file system(Like I
brought in /etc/init.d/corosync and /etc/init.d/pacemaker,
/etc/sysconfig ), After that I was able to run "pcs
cluster start".
But it failed with the following error
# pcs cluster start
Starting Cluster...
Starting Pacemaker Cluster Manager[FAILED]
Error: unable to start pacemaker
And in the /var/log/pacemaker.log, I saw these errors
pacemakerd: info: mcp_read_config: cmap connection
setup failed: CS_ERR_TRY_AGAIN. Retrying in 4s
Apr 29 08:53:47 [15863] node_cu pacemakerd: info:
mcp_read_config: cmap connection setup failed:
CS_ERR_TRY_AGAIN. Retrying in 5s
Apr 29 08:53:52 [15863] node_cu pacemakerd: warning:
mcp_read_config: Could not connect to Cluster
Configuration Database API, error 6
Apr 29 08:53:52 [15863] node_cu pacemakerd: notice:
main: Could not obtain corosync config data, exiting
Apr 29 08:53:52 [15863] node_cu pacemakerd: info:
crm_xml_cleanup: Cleaning up memory from libxml2
And in the /var/log/Debuglog, I saw these errors coming
from corosync
20160429 085347.487050 <tel:085347.487050> airv_cu
daemon.warn corosync[12857]: [QB ] Denied connection,
is not ready (12857-15863-14)
20160429 085347.487067 <tel:085347.487067> airv_cu
daemon.info <http://daemon.info> corosync[12857]: [QB
] Denied connection, is not ready (12857-15863-14)
I browsed the code of libqb to find that it is failing in
https://github.com/ClusterLabs/libqb/blob/master/lib/ipc_setup.c
Line 600 :
handle_new_connection function
Line 637:
if (auth_result == 0 &&
c->service->serv_fns.connection_accept) {
res = c->service->serv_fns.connection_accept(c,
c->euid, c->egid);
}
if (res != 0) {
goto send_response;
}
Any hints on this issue would be really helpful for me to
go ahead.
Please let me know if any logs are required,
Regards,
Sriram
On Thu, Apr 28, 2016 at 2:42 PM, Sriram
<sriram...@gmail.com <mailto:sriram...@gmail.com>> wrote:
Thanks Ken and Emmanuel.
Its a big endian machine. I will try with running "pcs
cluster setup" and "pcs cluster start"
Inside cluster.py, "service pacemaker start" and
"service corosync start" are executed to bring up
pacemaker and corosync.
Those service scripts and the infrastructure needed to
bring up the processes in the above said manner
doesn't exist in my board.
As it is a embedded board with the limited memory,
full fledged linux is not installed.
Just curious to know, what could be reason the
pacemaker throws that error.
/"cmap connection setup failed: CS_ERR_TRY_AGAIN.
Retrying in 1s"
/
Thanks for response.
Regards,
Sriram.
On Thu, Apr 28, 2016 at 8:55 AM, Ken Gaillot
<kgail...@redhat.com <mailto:kgail...@redhat.com>> wrote:
On 04/27/2016 11:25 AM, emmanuel segura wrote:
> you need to use pcs to do everything, pcs
cluster setup and pcs
> cluster start, try to use the redhat docs for
more information.
Agreed -- pcs cluster setup will create a proper
corosync.conf for you.
Your corosync.conf below uses corosync 1 syntax,
and there were
significant changes in corosync 2. In particular,
you don't need the
file created in step 4, because pacemaker is no
longer launched via a
corosync plugin.
> 2016-04-27 17:28 GMT+02:00 Sriram
<sriram...@gmail.com <mailto:sriram...@gmail.com>>:
>> Dear All,
>>
>> I m trying to use pacemaker and corosync for
the clustering requirement that
>> came up recently.
>> We have cross compiled corosync, pacemaker and
pcs(python) for ppc
>> environment (Target board where pacemaker and
corosync are supposed to run)
>> I m having trouble bringing up pacemaker in
that environment, though I could
>> successfully bring up corosync.
>> Any help is welcome.
>>
>> I m using these versions of pacemaker and corosync
>> [root@node_cu pacemaker]# corosync -v
>> Corosync Cluster Engine, version '2.3.5'
>> Copyright (c) 2006-2009 Red Hat, Inc.
>> [root@node_cu pacemaker]# pacemakerd -$
>> Pacemaker 1.1.14
>> Written by Andrew Beekhof
>>
>> For running corosync, I did the following.
>> 1. Created the following directories,
>> /var/lib/pacemaker
>> /var/lib/corosync
>> /var/lib/pacemaker
>> /var/lib/pacemaker/cores
>> /var/lib/pacemaker/pengine
>> /var/lib/pacemaker/blackbox
>> /var/lib/pacemaker/cib
>>
>>
>> 2. Created a file called corosync.conf under
/etc/corosync folder with the
>> following contents
>>
>> totem {
>>
>> version: 2
>> token: 5000
>> token_retransmits_before_loss_const: 20
>> join: 1000
>> consensus: 7500
>> vsftype: none
>> max_messages: 20
>> secauth: off
>> cluster_name: mycluster
>> transport: udpu
>> threads: 0
>> clear_node_high_bit: yes
>>
>> interface {
>> ringnumber: 0
>> # The following three values
need to be set based on your
>> environment
>> bindnetaddr: 10.x.x.x
>> mcastaddr: 226.94.1.1
>> mcastport: 5405
>> }
>> }
>>
>> logging {
>> fileline: off
>> to_syslog: yes
>> to_stderr: no
>> to_syslog: yes
>> logfile: /var/log/corosync.log
>> syslog_facility: daemon
>> debug: on
>> timestamp: on
>> }
>>
>> amf {
>> mode: disabled
>> }
>>
>> quorum {
>> provider: corosync_votequorum
>> }
>>
>> nodelist {
>> node {
>> ring0_addr: node_cu
>> nodeid: 1
>> }
>> }
>>
>> 3. Created authkey under /etc/corosync
>>
>> 4. Created a file called pcmk under
/etc/corosync/service.d and contents as
>> below,
>> cat pcmk
>> service {
>> # Load the Pacemaker Cluster Resource
Manager
>> name: pacemaker
>> ver: 1
>> }
>>
>> 5. Added the node name "node_cu" in /etc/hosts
with 10.X.X.X ip
>>
>> 6. ./corosync -f -p & --> this step started
corosync
>>
>> [root@node_cu pacemaker]# netstat -alpn | grep
-i coros
>> udp 0 0 10.X.X.X:61841 0.0.0.0:*
>> 9133/corosync
>> udp 0 0 10.X.X.X:5405 0.0.0.0:*
>> 9133/corosync
>> unix 2 [ ACC ] STREAM LISTENING
148888 9133/corosync
>> @quorum
>> unix 2 [ ACC ] STREAM LISTENING
148884 9133/corosync
>> @cmap
>> unix 2 [ ACC ] STREAM LISTENING
148887 9133/corosync
>> @votequorum
>> unix 2 [ ACC ] STREAM LISTENING
148885 9133/corosync
>> @cfg
>> unix 2 [ ACC ] STREAM LISTENING
148886 9133/corosync
>> @cpg
>> unix 2 [ ] DGRAM
148840 9133/corosync
>>
>> 7. ./pacemakerd -f & gives the following error
and exits.
>> [root@node_cu pacemaker]# pacemakerd -f
>> cmap connection setup failed:
CS_ERR_TRY_AGAIN. Retrying in 1s
>> cmap connection setup failed:
CS_ERR_TRY_AGAIN. Retrying in 2s
>> cmap connection setup failed:
CS_ERR_TRY_AGAIN. Retrying in 3s
>> cmap connection setup failed:
CS_ERR_TRY_AGAIN. Retrying in 4s
>> cmap connection setup failed:
CS_ERR_TRY_AGAIN. Retrying in 5s
>> Could not connect to Cluster Configuration
Database API, error 6
>>
>> Can you please point me, what is missing in
these steps ?
>>
>> Before trying these steps, I tried running "pcs
cluster start", but that
>> command fails with "service" script not found.
As the root filesystem
>> doesn't contain either /etc/init.d/ or
/sbin/service
>>
>> So, the plan is to bring up corosync and
pacemaker manually, later do the
>> cluster configuration using "pcs" commands.
>>
>> Regards,
>> Sriram
>>
>> _______________________________________________
>> Users mailing list: Users@clusterlabs.org
<mailto:Users@clusterlabs.org>
>> http://clusterlabs.org/mailman/listinfo/users
>>
>> Project Home: http://www.clusterlabs.org
>> Getting started:
http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>> Bugs: http://bugs.clusterlabs.org
>>
>
>
>
_______________________________________________
Users mailing list: Users@clusterlabs.org
<mailto:Users@clusterlabs.org>
http://clusterlabs.org/mailman/listinfo/users
Project Home: http://www.clusterlabs.org
Getting started:
http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
Bugs: http://bugs.clusterlabs.org
_______________________________________________
Users mailing list: Users@clusterlabs.org
<mailto:Users@clusterlabs.org>
http://clusterlabs.org/mailman/listinfo/users
Project Home: http://www.clusterlabs.org
Getting started:
http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
Bugs: http://bugs.clusterlabs.org
_______________________________________________
Users mailing list: Users@clusterlabs.org
http://clusterlabs.org/mailman/listinfo/users
Project Home: http://www.clusterlabs.org
Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
Bugs: http://bugs.clusterlabs.org