On Wed, 14 Feb 2018 23:11:49 +0000 Eric Robinson <eric.robin...@psmnv.com> wrote:
> > > Thanks for the <altname> suggestion everyone. I'll give that a try. > > > > Sorry, I'm late on this, but I wrote a quick start doc describing this > > (amongs other things) some time ago. See the following chapter: > > > > https://clusterlabs.github.io/PAF/Quick_Start-CentOS-6.html#cluster- > > creation > > > > I scanned through that page but I did not see where it talks about setting up > multiple corosync rings. Quoting the page: « If you have an alternative network available (this is highly recommended), you can use the following syntax: pcs cluster setup --name cluster_pgsql srv1,srv1-alt srv2,srv2-alt srv3,srv3-alt If your version of pcs does not support it (ie. CentOS 6.6 and bellow), you can fallback on the old but useful ccs command: pcs cluster setup --name cluster_pgsql srv1 srv2 srv3 ccs -f /etc/cluster/cluster.conf --addalt srv1 srv1-alt ccs -f /etc/cluster/cluster.conf --addalt srv2 srv2-alt ccs -f /etc/cluster/cluster.conf --addalt srv3 srv3-alt pcs cluster sync » _______________________________________________ Users mailing list: Users@clusterlabs.org http://lists.clusterlabs.org/mailman/listinfo/users Project Home: http://www.clusterlabs.org Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf Bugs: http://bugs.clusterlabs.org