Sorry, Rorthais, I have thought that the link and the attachment was the same document yesterday. I just read the attachment and that is exactly what I ask originally.
I have two questions on the following two command: # pcs constraint colocation add pgsql-ip-stby1 with slave pgsql-ha 10 Q: Does the score 10 means that " move to the master if there is no standby alive "? # pcs constraint order start pgsql-ha then start pgsql-ip-stby1 kind=Mandatory Q: I did not set the order and I did not find the issue until now. So I add this constraint? What will happen if I miss it? Here is what I did now: pcs resource create pgsql-slave-ip1 ocf:heartbeat:IPaddr2 ip=192.168.199.186 nic=enp3s0f0 cidr_netmask=24 op monitor interval=10s; pcs resource create pgsql-slave-ip2 ocf:heartbeat:IPaddr2 ip=192.168.199.187 nic=enp3s0f0 cidr_netmask=24 op monitor interval=10s; pcs constraint colocation add pgsql-slave-ip1 with pgsql-ha pcs constraint colocation add pgsql-slave-ip2 with pgsql-ha pcs constraint colocation set pgsql-slave-ip1 pgsql-slave-ip2 pgsql-master-ip setoptions score=-1000 -----邮件原件----- 发件人: Jehan-Guillaume de Rorthais [mailto:j...@dalibo.com] 发送时间: 2018年3月7日 16:29 收件人: 范国腾 <fanguot...@highgo.com> 抄送: Cluster Labs - All topics related to open-source clustering welcomed <users@clusterlabs.org> 主题: Re: [ClusterLabs] 答复: 答复: 答复: How to configure to make each slave resource has one VIP On Wed, 7 Mar 2018 01:27:16 +0000 范国腾 <fanguot...@highgo.com> wrote: > Thank you, Rorthais, > > I read the link and it is very helpful. Did you read the draft I attached to the email? It was the main purpose of my answer: helping you with IP on slaves. It seems to me your mail is reporting different issues than the original subject. > There are some issues that I have met when I installed the cluster. I suppose this is another subject and we should open a new thread with the appropriate subject. > 1. “pcs cluster stop” could not stop the cluster in some times. You would have to give some more details about the context where "pcs cluster stop" timed out. > 2. when I upgrade the PAF, I could just replace the pgsqlms file. When > I upgrade the postgres, I just replace the /usr/local/pgsql/. I believe both actions are documented with best practices in this links I gave you. > 3. If the cluster does not stop normally, the pgcontroldata status is > not "SHUTDOWN",then the PAF would not start the postgresql any more, > so I normally change the pgsqlms as below after installing the PAF. > [...] This should be discussed to understand the exact context before considering your patch. At a first glance, your patch seems quite dangerous as it bypass the sanity checks. Please, could you start a new thread with proper subject and add extensive informations about this issue? You could open a new issue on PAF repository as well: https://github.com/ClusterLabs/PAF/issues Regards, _______________________________________________ Users mailing list: Users@clusterlabs.org https://lists.clusterlabs.org/mailman/listinfo/users Project Home: http://www.clusterlabs.org Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf Bugs: http://bugs.clusterlabs.org