Try opening the port with minicom and closing without resetting just after launching Kannel. I don't know why, but Kannel seems to have problems initializing the modem for the first time and that may fix it.
Regards, Alejandro On 6/1/07, Julien Buratto <[EMAIL PROTECTED]> wrote:
Hi all, I'm trying a new modem usb. When I plugit into my linux box, I get from kernel: Jun 1 14:43:37 db kernel: cdc_acm 4-1:1.0: ttyACM0: USB ACM device If I set this tty to kannel.conf and launch kannel, I get in the logs: 2007-06-01 14:46:24 [5106] [7] INFO: AT2[Modem_TEST]: opening device 2007-06-01 14:46:24 [5106] [7] DEBUG: AT2[Modem_TEST]: device opened 2007-06-01 14:46:25 [5106] [7] DEBUG: AT2[Modem_TEST]: device opened 2007-06-01 14:46:25 [5106] [7] INFO: AT2[Modem_TEST]: speed set to 57600 2007-06-01 14:46:25 [5106] [7] DEBUG: AT2[Modem_TEST]: --> ^M 2007-06-01 14:46:27 [5106] [7] DEBUG: AT2[Modem_TEST]: --> AT^M 2007-06-01 14:46:31 [5106] [7] DEBUG: AT2[Modem_TEST]: --> AT^M 2007-06-01 14:46:35 [5106] [7] DEBUG: AT2[Modem_TEST]: --> AT^M 2007-06-01 14:46:39 [5106] [7] INFO: AT2[Modem_TEST]: closing device 2007-06-01 14:46:39 [5106] [7] INFO: AT2[Modem_TEST]: opening device 2007-06-01 14:46:39 [5106] [7] DEBUG: AT2[Modem_TEST]: device opened 2007-06-01 14:46:40 [5106] [7] DEBUG: AT2[Modem_TEST]: device opened 2007-06-01 14:46:40 [5106] [7] INFO: AT2[Modem_TEST]: speed set to 38400 2007-06-01 14:46:40 [5106] [7] DEBUG: AT2[Modem_TEST]: --> ^M 2007-06-01 14:46:42 [5106] [7] DEBUG: AT2[Modem_TEST]: --> AT^M 2007-06-01 14:46:46 [5106] [7] DEBUG: AT2[Modem_TEST]: --> AT^M 2007-06-01 14:46:50 [5106] [7] DEBUG: AT2[Modem_TEST]: --> AT^M 2007-06-01 14:46:54 [5106] [7] INFO: AT2[Modem_TEST]: closing device 2007-06-01 14:46:54 [5106] [7] INFO: AT2[Modem_TEST]: opening device 2007-06-01 14:46:54 [5106] [7] DEBUG: AT2[Modem_TEST]: device opened 2007-06-01 14:46:55 [5106] [7] DEBUG: AT2[Modem_TEST]: device opened 2007-06-01 14:46:55 [5106] [7] INFO: AT2[Modem_TEST]: speed set to 19200 My configuration for that modem is: group = smsc smsc = at smsc-id = Modem_TEST max-error-count = 10 device = /dev/ttyACM0 pin = 0000 keepalive = 60 Any ideas ? Is there a way I can emulate a serial port for that modem ? Thanks
-- Alejandro Guerrieri Magicom http://www.magicom-bcn.net/ LinkedIn: http://www.linkedin.com/in/aguerrieri
