Please, I need a help here. I want to to be able to receive message from a telco's SMPP SMSC and only pass it to a url. I also need another SMPP SMSC that will only deliver mesage to the same telco.
Is this possible? lekkie wrote: > > Hi, > > Below is my config file. > > However, what'd like is a single HTTP connection to an application to send > and receive SMS from the application > > > I'd also like 3 links to 3 telcos over SMPP binding as transceivers, so > that they can receive and send messages. > > How can I make sure a message coming from a telco SMSC link will be > forwarded to another SMSC or to a URL. > I also want to be able to receive message from this application and > forward it to an SMSC. (This I can do my specifying the user) > > Thanks. > > group = core > admin-port = 13000 > smsbox-port = 13001 > admin-password = password > #status-password = password > admin-allow-ip = 127.0.0.1 > log-file = "/var/smsgateway/log/kannel.log" > log-level = 0 > box-deny-ip = "*.*.*.*" > box-allow-ip = 127.0.0.1 > unified-prefix = "+234,0" > access-log = "/var/smsgateway/log/access.log" > #store-file = "/var/smsgateway/kannel/kannel.store" > > > group = smsc > smsc = smpp > host = [telco-ip] > port = [telco-port] > receive-port = [same-port-as-above] > transceiver-mode = true > smsc-id = TelcoSmppLink > smsc-username = uname > smsc-password = pword > system-type = [system-type] > service-type = smpp > allowed-prefix = +234803;+234806;+234703;0803;0806;0703 > denied-prefix = * > unified-prefix = "+234,0,234" > log-file = "/var/smsgateway/log/kannel.log" > log-level = 0 > address-range = 0 > connect-allow-ip = "127.0.0.1;[telco-ip]" > > > # SMSC Link to send SMS to app > group = smsc > smsc = http > port = 0 > smsc-id = HttpLinkToApp > system-type = kannel > smsc-username = http > smsc-password = http > send-url = > "http://[app-server-ip]/app/smexpress?smsvendor=kannel&from=%P&to=%p&text=%b&id=%I"; > allowed-prefix = > "+234803;+234806;+234703;0803;0806;0703;+234805;+234807;0805;0807;+234802;+234808;0802;0808" > denied-prefix = * > preferred-smsc-id = HttpLinkToApp > unified-prefix = "+234,0,234" > log-file = "/var/smsgateway/log/kannel.log" > log-level = 0 > address-range = 0 > connect-allow-ip = "127.0.0.1" > > > # SMSC Link to receive SMS from app > group = smsc > smsc = http > port = 8080 > smsc-id = HttpLinkFromPayphone > system-type = kannel > smsc-username = http > smsc-password = http > send-url = > "http://localhost:13013/cgi-bin/sendsms?username=telco&password=telco&from=AppName&to=%p&text=%b"; > allowed-prefix = "+234803;+234806;+234703;0803;0806;0703" > denied-prefix = * > preferred-smsc-id = HttpLinkFromApp > unified-prefix = "+234,0,234" > log-file = "/var/smsgateway/log/kannel.log" > log-level = 0 > address-range = 0 > connect-allow-ip = "127.0.0.1;[app-server-ip]" > > > group = smsbox > smsbox-id = LinktoTelcoSMSBox > bearerbox-host = "127.0.0.1" > sendsms-port = 13013 > global-sender = "App" > #sendsms-chars = "0123456789 +-" > log-file = "/var/smsgateway/log/smsbox.log" > log-level = 0 > access-log = "/var/smsgateway/log/access.log" > > > group = smsbox > smsbox-id = LinktoAppNameSMSBox > bearerbox-host = "172.16.10.249" > sendsms-port = 13013 > global-sender = "App" > #sendsms-chars = "0123456789 +-" > log-file = "/var/smsgateway/log/smsbox.log" > log-level = 0 > access-log = "/var/smsgateway/log/access.log > > > group = smsbox-route > smsbox-id = LinktoTelcoSMSBox > smsc-ids = TelcoSmppLink > > > # SEND-SMS USERS > group = sendsms-user > username = mtn > password = mtn > forced-smsc = TelcoSmppLink > allowed-prefix = "+234803;+234806;+234703;0803;0806;0703" > #user-deny-ip = "" > #user-allow-ip = "" > > > # SEND-SMS USERS > group = sendsms-user > username = appname > password = appname > forced-smsc = SmscToApp > allowed-prefix = > "+234803;+234806;+234703;0803;0806;0703;+234805;+234807;0805;0807;+234802;+234808;0802;0808" > #user-deny-ip = "" > #user-allow-ip = "" > > > > > > > Rodrigo Cremaschi wrote: >> >> Hi Lekkie, >> >> Tell us what have you done so far, and what problems have you >> encountered. If you talked to the the carrier guys, what did they say? >> So we can find out if Kannel, or the connection, or the SMSC has any >> kind of problem. >> >> Regards, >> Rodrigo. >> >> On 8/31/07, lekkie <[EMAIL PROTECTED]> wrote: >>> >>> How do I route incoming messages from SMPP Link? >>> >>> >>> Rodrigo Cremaschi wrote: >>> > >>> > In that case, you must declare "transceiver-mode" variable to "true". >>> > Omit "receive-port" variable. >>> > >>> > Check the userguide, under SMPP 3.4 section. >>> > >>> > Regards. >>> > >>> > On 8/29/07, lekkie omotayo <[EMAIL PROTECTED]> wrote: >>> >> Thanks for quick response. >>> >> >>> >> Yes, they have transceiver. >>> >> >>> >> If the operator has a transceiver connection, how can I can get the >>> >> inbound >>> >> messages from my operator? >>> >> How to I set up the config? >>> >> >>> >> What if my operator only supports transmitter/Receiver connection? >>> >> >>> >> Kind regards, >>> >> >>> >> Lekkie >>> >> >>> >> >>> >> On 8/29/07, Rodrigo Cremaschi <[EMAIL PROTECTED]> wrote: >>> >> > > Could this be because of the kannel version I am using (1.4.1)? >>> >> > No >>> >> > >>> >> > > Is it possible to receive SMS on SMPP connection? >>> >> > Yes, that's what Kannel is for. >>> >> > >>> >> > Are you sure your operator needs 2 connetcions Tx and Rx? Or is it >>> a >>> >> > transceiver? >>> >> > >>> >> > On 8/29/07, lekkie <[EMAIL PROTECTED] > wrote: >>> >> > > >>> >> > > Hi guys, >>> >> > > >>> >> > > I am trying to connect kannel to my mobile operator through an >>> SMPP >>> >> > > connection. >>> >> > > >>> >> > > However, my kannel box seem not to be listening on the receiver >>> port >>> >> I >>> >> > > specified. It ws able to connect to my operator on the >>> transmitter >>> >> port, >>> >> but >>> >> > > it never listen on the specified receive-port. >>> >> > > >>> >> > > With some googling, I found out, I can only get a receiver >>> connection >>> >> by >>> >> > > creating two separate SMSC configs using one as a transmitter the >>> >> other >>> >> as a >>> >> > > receiver. I was advised to set transceiver mode to "no", set the >>> >> > > receive-port option to 0 (set transmit port) if I want to >>> transmit >>> >> and >>> >> set >>> >> > > transmit port to 0 if I want to receive (set receive port to >>> 2001). >>> >> When >>> >> I >>> >> > > did this, the log file told me I had a receiver bind however, >>> kannel >>> >> > > connects to the operator's SMSC on the receiver port even though >>> >> transmitter >>> >> > > port is set to 0. >>> >> > > >>> >> > > >>> >> > > However, when I tried setting both port to same port, I ended up >>> >> having >>> >> two >>> >> > > connections to SMSC both connection to the operator's port while >>> >> source >>> >> port >>> >> > > was not open >>> >> > > >>> >> > > However, when I tried setting both port to diff port, I ended up >>> >> having >>> >> one >>> >> > > connection to SMSC. >>> >> > > >>> >> > > I am afraid my config file may be wrong. >>> >> > > >>> >> > > Is there a way I can do this. >>> >> > > >>> >> > > Do I need 1 smsc config to achieve both transmitter and receiver >>> >> connection? >>> >> > > Do I need 1 smsbox config to achieve both transmitter and >>> receiver >>> >> > > connection? >>> >> > > >>> >> > > Could this be because of the kannel version I am using ( 1.4.1)? >>> >> > > >>> >> > > Is it possible to receive SMS on SMPP connection? >>> >> > > >>> >> > > Thanks. >>> >> > > >>> >> > > >>> >> > > -- >>> >> > > View this message in context: >>> >> >>> http://www.nabble.com/How-to-receive-MO-on-an-SMPP-link-tf4350019.html#a12394561 >>> >> > > Sent from the Kannel - User mailing list archive at Nabble.com. >>> >> > > >>> >> > > >>> >> > > >>> >> > >>> >> >>> >> >>> > >>> > >>> > >>> >>> -- >>> View this message in context: >>> http://www.nabble.com/How-to-receive-MO-on-an-SMPP-link-tf4350019.html#a12426727 >>> Sent from the Kannel - User mailing list archive at Nabble.com. >>> >>> >>> >> >> >> > > -- View this message in context: http://www.nabble.com/How-to-receive-MO-on-an-SMPP-link-tf4350019.html#a12433703 Sent from the Kannel - User mailing list archive at Nabble.com.
