Thx all, the pc label helped a lot.

also i think 1920x1080i is a bit more sharp an image.

next, how to persist it across reboot.

thx again to all, jackc...

On Mon, Aug 29, 2016 at 3:14 PM, Go Canes <letsgonhlcan...@gmail.com> wrote:

> For mine I have to use:
>
> intel_panel_fitter -p A -x 1246 -y 686
>
> IIRC, I had to install a package to get the intel_panel_fitter program -
> not sure if it useful if you don't have Intel graphics.
>
> (I'll have to see if I can rename the HDMI port - my HDTV already has a PC
> port for the VGA connector....)
>
> On Mon, Aug 29, 2016 at 1:43 PM, Jack Craig <jack.craig.ap...@gmail.com>
> wrote:
>
>> hi all,
>>
>> i am trying to use a 32" LG 32cs560 for my F23.
>>
>> i can get 1368x768 but i want to crank up 1920x1080, but its
>> overscanning, truncating the left * right ends...
>>
>> i get ...
>>
>> xrandr --query
>> Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 16384 x 16384
>> DVI-I-1 disconnected (normal left inverted right x axis y axis)
>> HDMI-1 connected primary 2016x1134+0+0 (normal left inverted right x axis
>> y axis) 1600mm x 900mm
>>    1920x1080     60.00*+  60.00    59.94    59.99    30.00    24.00
>> 29.97    23.98
>>    1920x1080i    60.00    59.94
>>    1280x1024     60.02
>>    1360x768      60.02
>>    1152x864      59.97
>>    1280x720      60.00    59.94
>>    1024x768      60.00
>>    800x600       60.32
>>    720x480       60.00    59.94
>>    640x480       60.00    59.94
>>    720x400       70.08
>> VGA-1 disconnected (normal left inverted right x axis y axis)
>>
>> /0/100/1/0                           display        GF119 [GeForce GT
>> 610]
>> /0/100/1/0.1                         multimedia     GF119 HDMI Audio
>> Controller
>> /0/100/16                            communication  6 Series/C200 Series
>> Chipset Fami
>>
>> xdpyinfo | grep -B2 resolution
>> screen #0:
>>   dimensions:    1920x1080 pixels (508x286 millimeters)
>>   resolution:    96x96 dots per inch
>>
>> cvt -v 1920 1080 60
>> # 1920x1080 59.96 Hz (CVT 2.07M9) hsync: 67.16 kHz; pclk: 173.00 MHz
>> Modeline "1920x1080_60.00"  173.00  1920 2048 2248 2576  1080 1083 1088
>> 1120 -hsync +vsync
>>
>>
>> despite all this info, i am unable to switch to 1020x1080 with out the
>> over scanning.
>>
>> i am very suspicious about,...
>>
>>
>> *HDMI-1 connected primary 2016x1134+0+0 (normal left inverted right x
>> axis y axis) 1600mm x 900mm*
>> *should not  *2016x1134+0+0 be 1920x1080?
>>
>>
>> suggestions? tia, jackc...
>>
>>
>> --
>> users mailing list
>> users@lists.fedoraproject.org
>> To unsubscribe or change subscription options:
>> https://lists.fedoraproject.org/admin/lists/users@lists.fedoraproject.org
>> Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct
>> Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
>> Have a question? Ask away: http://ask.fedoraproject.org
>>
>>
>
> --
> users mailing list
> users@lists.fedoraproject.org
> To unsubscribe or change subscription options:
> https://lists.fedoraproject.org/admin/lists/users@lists.fedoraproject.org
> Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct
> Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
> Have a question? Ask away: http://ask.fedoraproject.org
>
>
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://lists.fedoraproject.org/admin/lists/users@lists.fedoraproject.org
Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org

Reply via email to