I've just touched the surface of Plan 9 and am trying to get networking
functional. In Qemu and on the Pi my /net/iproute is virtually the same
( http://i.imgur.com/Yv7xnNS.png ). The image is the Qemu and the Pi is
the same except it is missing the 10* and 0* entries. ip/ipconfig
returns a DHCP failure on both, and 'ndb/dns -r' returns a 'can't read
my ip address error'.
I have been informed for Qemu I have to bridge and tap, I am going off
of ( http://toast.djw.org.uk/qemu.html ) as I do not have
qemu-bridge-helper. For the Pi I'm not sure what I should be doing. The
router is acting as a wired switch and in port 1 I have a tower that is
bridging its internet, DNS, and running a DHCP server. The router's
server is disabled, and I made sure their ip's are not conflicting. The
Pi does not seem to get that far at least because it can't ping the
router (192.168.1.1) nor the tower (192.168.1.101).
I'm stuck and looking for help with this new environment, I'm very
familiar with Linux and hand configuring it, but this is vastly different.
- [9fans] Raspberry Pi/Qemu Networking Problems Sean Hinchee
-