>by hand, changing the 'Sync Mode' value from AutoSync to Master
>(should these values be in quotes?), ran "alsactl store hammerfall",
>unloaded then reloaded the alsa m odules, then ran "alsactl restore
>hammerfall. ("hammerfall" is the card's id.) but asound .state
>still indicates Sync Mode is set to AutoSync. "vi
>/proc/asound/hammerfall/rme 9652" reads
you got the process wrong.
1) alsactl store hammerfall
2) edit file
3) alsactl restore hammerfall
no driver unload/load is needed. each time you reload the module
without the 3rd step, you get back to the driver's own default
settings.
>i'm also curious if the "IEC958 sample rate: error flag set" is normal and if
>not, what to
>look at to fix it. asound.state says
it means you have no s/pdif input.
--p
-------------------------------------------------------
This SF.NET email is sponsored by: Geek Gift Procrastinating?
Get the perfect geek gift now! Before the Holidays pass you by.
T H I N K G E E K . C O M http://www.thinkgeek.com/sf/
_______________________________________________
Alsa-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
