it works! disks burn correctly now. thanks to everyone who helped me get this
straightened out, especially paul davis and joerg shilling. in case it might help
someone
else, i'm running a redhat based system and load the hammerfall modules at boot time
with
this line added to /etc/rc.d/rc.sysinit:
action "Loading ALSA Hammerfall driver" modprobe snd-rme9652
/etc/modules.conf is set to load soundcore and snd-rme9652-mem before snd-rme9652, so
this
takes care of it. to automatically set the hammerfall's internal clock as master (or
use
any non-default configuration) , the line
action "Setting Hammerfall as master clock" alsactl restore snd-rme9652
can be added after the modprobe command.
patrick
Paul Davis wrote:
>
> >by hand, changing the 'Sync Mode' value from AutoSync to Master
> >(should these values be in quotes?), ran "alsactl store hammerfall",
> >unloaded then reloaded the alsa m odules, then ran "alsactl restore
> >hammerfall. ("hammerfall" is the card's id.) but asound .state
> >still indicates Sync Mode is set to AutoSync. "vi
> >/proc/asound/hammerfall/rme 9652" reads
>
> you got the process wrong.
>
> 1) alsactl store hammerfall
> 2) edit file
> 3) alsactl restore hammerfall
>
> no driver unload/load is needed. each time you reload the module
> without the 3rd step, you get back to the driver's own default
> settings.
>
> >i'm also curious if the "IEC958 sample rate: error flag set" is normal and if
> >not, what to
> >look at to fix it. asound.state says
>
> it means you have no s/pdif input.
>
> --p
-------------------------------------------------------
This SF.NET email is sponsored by: Geek Gift Procrastinating?
Get the perfect geek gift now! Before the Holidays pass you by.
T H I N K G E E K . C O M http://www.thinkgeek.com/sf/
_______________________________________________
Alsa-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
